100%(2)100% au considerat acest document util (2 voturi)
298 vizualizări17 pagini
This document provides step-by-step instructions for setting up Multi-Discipline Support (MDS) in PDMS for a project. It involves creating folders and editing configuration files to set the paths, importing required data from other databases, copying default templates, creating users and teams, and activating the MDS functionality for the project to allow multi-discipline modeling.
This document provides step-by-step instructions for setting up Multi-Discipline Support (MDS) in PDMS for a project. It involves creating folders and editing configuration files to set the paths, importing required data from other databases, copying default templates, creating users and teams, and activating the MDS functionality for the project to allow multi-discipline modeling.
This document provides step-by-step instructions for setting up Multi-Discipline Support (MDS) in PDMS for a project. It involves creating folders and editing configuration files to set the paths, importing required data from other databases, copying default templates, creating users and teams, and activating the MDS functionality for the project to allow multi-discipline modeling.
Note : “XXX” is the project code. In this case “XXX” is “EDQ”.
2. Edit the path in PDMSEQD.bat
3. Edit the path in evarsEDQ.bat
4. Add the new link go to EQDdflts in evarsEDQ.bat file :
5. Copy the text which highlight in evarsEDQ.bat
Then paste to C:\AVEVA\Plant\MDS12.0.SP5\mds.bat
6. Open mds.bat then add the link as below Note : D:\MR_THANH\EDQ\ : path where the project is located. 7. Copy all data in mdsdflts folder from C:\AVEVA\Plant\MDS12.0.SP5\project\mds\
Then paste to folder EDQdflts in D:\MR_THANH\EDQ\EDQdflts
8. Run PDMSEDQ.bat from D:\MR_THANH\EDQ as below
9. Create the user MDS as below
In team membership add the data as below
10. Create the Teams MDS as below
11. Create the Master DB in Databases & Extracts
Save and Get work then Exit PDMS. 12. Run MDS with PDMS from program 13. Go to Databases & Extracts then Include some data as below - Choose MDS project - Username : SYSTEM - Password : XXXXXX - Data will be included : MDS/CATA MDS/PROP MDS/WELDS MDS/DESITMPL-BS MDS/DESITMPL-PSL
- Choose MASS project
- Username : SYSTEM - Password : XXXXXX - Data will be included : MASTER/MDSDICT
- Choose MDU project
- Username : SYSTEM - Password : XXXXXX - Data will be included : MDU/CATA
- Choose IMP project
- Username : SYSTEM - Password : XXXXXX - Data will be included : CATS/CATA CATS/DESI Note : If have mistake like below
We have to remove the DB No. 7160 by delete its.
Save and get work 14. We will Copy Foreign some data in Databases & Extracts Copy Foreign as below : MDS/MDSAPPDEFAULTS MDS/DESI-SPECIAL-TMPL-BS MDS/DRAFT 15. Create MDBs MDS as below: We will choose any <MDB> then click copy
Then name : MDS
Choose <MDB> MDS then click Modify
We will move the data below in Project Databases to Current Databases - CATS/CATA - CATS/DESI - MASTER/MDSDICT - MDS/CATA - MDS/DESI-SPECIAL-TMPL-BS - MDS/DESITMPL-BS - MDS/DESITMPL-PSL - MDS/DRAFT - MDS/MDS - MDS/MDSAPPDEFAULTS - MDS/PROP - MDS/WELD - MDU/CATA Save & get work 16. Run MDS with PDMS as below
We will MDS Active Control by click Modify/MDS Active Control
Then the MDS Active Control panel will open, we will choose ALL Tab, click Select All and click Active as below
After that, we will click Apply & Dismiss. Save & Get work 17. Run MDS with PDMS as below
Note : if have any problem, we have just only clicked YES/OK
18. Choose MDS_THANH then click Create/Zone
Click Display/Command Line then choose ZONE MDS_SUPPORT, put Q ATT
in command line, then make the Purpose SUPP as below Save & get work 19. Click Design/Multi Discipline Supports. If have the table as below just only click OK
NOW, CONGRATULATION MY FRIEND, WE HAVE DONE THE SET UP