Documente Academic
Documente Profesional
Documente Cultură
The Institute for Environmental Vacuuming or tack rolling The second vacuuming removes
Sciences preferred Cleanroom should be used to pull loose loosened particles and cleaner
cleaning Protocol can be summed particles from surfaces. Wiping residues. It is a method tested
up in three words: provides mechanical energy to over time to be most reliable
remove more tightly bound and can be applied to most
Vacuum, Wipe, Vacuum. particles and cleaning solutions general Cleanroom cleaning
break the surface tensions and applications
reduce adhesion forces.
Step 8 3 Floors
Vacuum surface. The rinse water should be left Failure to change the water on a
Wash floor with a 16:1 solution on the floor long enough too regular basis can lead to cross
of DI water and a floor cleanser completely saturate any film contamination, dragging
using a clean, non3 build3up. potentially damaging
contaminating mop head. Then the rinse water should be contamination from one area to
Rinse with DI water and a new, mopped up, making sure to the next.
clean non3particulating mop change the water after mopping After the floor is dry, it should
head every 10 to 15 square feet of be vacuumed.
floor surface.
The water change is critical to
the operation.
www.e3s3c.com