Documente Academic
Documente Profesional
Documente Cultură
Error messages
If two faults occur at the same time, the terminal displays the fault
with the highest priority.
Error messages always have higher priority than normal menus.
Faults 01-08 are level 2 faults and cannot be reset before the fault
is rectified.
The first two figures show to which module the error message re-
lates
(These figures are not shown on the display)
01 = Automatic gear changing
07 = Monitoring
04 = Lever Steering
06 = Micro-steering
80 = Overload protection system
01, 07 04
04. Gear lever not functioning.
Engine speed reduction.
Stop as soon as possible and contact service.
07 06
06. Coolant temperature extremely high.
Engine speed reduction.
Stop as soon as possible and contact service.
07 08
08. Gearbox oil temperature extremely high.
Engine speed reduction.
Stop as soon as possible and contact service.
0014
ContChamp DRD100-200 ECS 00-08
ECS SERVICE Terminal Group 20 P. 7
07 11
11. High coolant temperature.
Check coolant level and top up as required.
07 12
12. Low gearbox oil pressure.
Check oil level and top up as required.
07 14
14. Fuel level extremely low.
Fill the tank to avoid air in the system.
07 15
15. Low coolant level.
Top up the coolant fluid.
07 16
16. High hydraulic oil temperature.
Operation possible.
Contact service.
07 17
17. Faulty signal from fuel gauge sensor.
Operation possible.
Contact service.
07 18
18. Faulty signal from gearbox oil pressure sensor.
Operation possible.
Contact service.
0014
ContChamp DRD100-200 ECS 00-08
ECS SERVICE Terminal Group 20 P. 8
07 21
21. Faulty signal from gearbox oil temperature sensor.
Operation possible.
Contact service.
07 22
22. Faulty signal from hydraulic oil temperature sensor.
Operation possible.
Contact service.
07 23
23. Service interval exceeded.
Contact service as soon as possible.
01, 07 24
24. Faulty signal from prop shaft rpm sensor
Engine speed reduction.
Stop as soon as possible and contact service.
06 27
27. Faulty signal from mini steering sensor.
Switch off the steering system.
Contact service as soon as possible.
07 28
28. Warning! Low brake pressure.
Contact service as soon as possible.
0014
ContChamp DRD100-200 ECS 00-08
ECS SERVICE Terminal Group 20 P. 9
- 35
35. System fault ECU 5.
Contact service as soon as possible.
07 50
50. Battery voltage very low/high.
Contact service as soon as possible.
80 53
53. Faulty signal from angle sensor
Stop as soon as possible and contact service.
80 54
54. Faulty signal from length sensor.
Stop as soon as possible and check the sensor wire.
Contact service if the fault remains.
80 55 55. Faulty signal from pressure sensor, return line for left and
right lift cylinders. The balance is out if range.
Stop as soon as possible and contact service.
80 56
56. Faulty signal from pressure sensor, feed line for left
lift cylinder.
Stop as soon as possible and contact service.
80 57
57. Faulty signal from pressure sensor, feed line for right
lift cylinder.
Stop as soon as possible and contact service.
62. The Module 80 errors 53, 54, 67, 57 will activate error menu
80 62
62.
When error menu 62 is activated:
Warning lamp on the ECS-terminal lights up