Documente Academic
Documente Profesional
Documente Cultură
BY
2017
1 of 36
Camel Slaughter Slab
A SUBSTRUCTURE
1) Excavation and Earthwork (Provisional)
Clear the site of shrubs and all debris; remove from 2
a) 99 m
site as directed
b) Excavate to remove top vegetable soil average 99 m2
depth 200mm from ground level
c) Excavate in soft material for foundation trenches 53 m3
not exceeding 1.5m deep starting from reduced
level
2) Backfilling
a) Return, fill in and ram selected excavated material 28 m3
around foundations
3) Disposal of Surplus spoils
a) Load and cart away surplus material from site to an 25 m3
approved dumping site
4) Hardcore fill
a) 300mm Thick hardcore fillings compacted in layers 99 m2
not exceeding 150mm deep and well watered
2 of 36
Camel Slaughter Slab
3 of 36
Camel Slaughter Slab
B STRUCTURAL FRAME
1) Reinforced Concrete
Insitu concrete class 25/20 , vibrated and
reinforced as described, in:-
a) Beams 2 m3
2) Reinforcement
High tensile steel reinforcement to B.S. 4461 in
structural concrete work including cutting,
bending, hoisting, fixing, tying wire and spacing
blocks
a) 8 mm diameter bars 66 kg
b) 12 mm diameter bars 130 kg
3) Formwork
Formwork in sawn finish at any level to:-
a) Sides and soffits of beams 27 m2
4 of 36
Camel Slaughter Slab
C WALLING
1) Damp proof course
Three- ply bituminous felt damp proof course
bedded in cement and sand (1:4) mortar
(measured net allow for 300mm laps):-
a) 200mm wide 25 m
b) 150mm wide 8 m
2) External Walling
Machine cut natural stone walling,,load bearing
7N/mm², jointed bedded and jointed in cement
sand (1:3) mortar: reinforced with hoop iron after
every second course.
a) 200mm thick walling 49.3 m2
b) 200mm thick parapet walling 16 m2
3) Internal Walling
Machine cut natural stone walling,,load bearing
7N/mm², jointed bedded and jointed in cement
sand (1:3) mortar: reinforced with hoop iron after
every second course.
a) 150mm Thick walling 23 m2
TOTAL FOR WALLING CARRIED TO
SUMMARY
5 of 36
Camel Slaughter Slab
6 of 36
Camel Slaughter Slab
7 of 36
Camel Slaughter Slab
E DOORS
Note: All doors to be supplied and fixed s per the
details and schedule provided. All iron Mongery
that has not been measured separately shall be
priced together with the corresponding door.
1) Timber Doors
The following in timber doors as per the details
provided
a) Door Frames, architraves and beads
i) Ex 150x50mm hardwood frame rebated 31 m
ii) 50x15mm hardwood architrave chamfered 31 m
iii) 15x15mm hardwood quadrant bead 31 m
b) Door Shutters
Solid-Core Flush Doors
Supply and fix the following solid core, hardwood
veneer laminated door shutter with hardwood
lipping all round; veneer and colour to be
approved (Refer to drawings for more details)(All
glass has been measured separately)
8 of 36
Camel Slaughter Slab
9 of 36
Camel Slaughter Slab
F WINDOWS
1) Window sills
a) 500mm wide x 50mm thick precast concrete 2 m
window sill pointed in cement and sand (1:3)
mortar; weather throated
2) Steel casement window
Supply and fix the following Mild steel medium
duty casement windows: custom made: including
50x 50 x 3mm Angle main frame and Standard 1
inch 'Z' section framing with T-sections
intermediate framing:12x12mm solid SHS grilles
welded to the window main frame internally;
complete with all iron mongery (butt hinges,
handles, catches e.t.c) and lugs fixed to
manufacturer's specifications : (glass has been
measured separately) (Refer to drawings for more
details)(All glass has been measured separately)
a) Window overall size 600x 1200mm high 4 Nr
3) Glazing
6mm Thick obscure sheet glass and glazing to steel
2
a) To panes, 0.5-1.00m2 2 m
4) Painting
Prepare and apply two coats of grey oxide and two
coats of gloss oil paint on metal:-
a) General surfaces of steel windows (Both sides 4 m2
measured)
10 of 36
Camel Slaughter Slab
G FINISHES
1) Floor finishes
Insitu cement and sand (1:3) screed
a) 40mm thick steel trowelled finished 99 m2
b) Ditto; 100mm curved skirting 92 m2
2) Wall Finishes
Internal Walls : 12mm thick cement sand plaster,
with steel troweled finish, as described to:-
2
a) Wall and concrete surfaces internally 111.3 m
Prepare and apply two undercoats emulsion paint
and two finishing coats of first quality Silk Vinyl
emulsion paint as;-
b) Internal wall surfaces 111.3 m2
External Walls: 15mm Cement and sand (1:3)
render on block wall or concrete work to:-
c) Natural stone walling and concrete surfaces 65.3 m2
externally
External Walls: Fill uneven surfaces with stucco
filler to approval including sanding of all uneven
surfaces; apply two coats of white wash and two
finishing coats of premium quality acrylic latex
paint which is offering protection against severe
tropical weather as:
d) External walls surfaces 65.3 m2
11 of 36
Camel Slaughter Slab
BILL SUMMARY
A SUBSTRUCTURES
B STRUCTURAL FRAME
C WALLING
D ROOF AND RAIN WATER DISPOSAL
E DOORS
F WINDOWS
G FINISHES
H PRIME COST & PROVISIONAL SUMS
SUB-TOTAL
ADD:3% PRELIMINARIES
ADD: 5% CONTIGENCY
12 of 36
Goat Slaughter Slab
A SUBSTRUCTURE
1) Excavation and Earthwork (Provisional)
Clear the site of shrubs and all debris; remove from 2
a) 70 m
site as directed
b) Excavate to remove top vegetable soil average 70 m2
depth 200mm from ground level
c) Excavate in soft material for foundation trenches 32 m3
not exceeding 1.5m deep starting from reduced
level
d) Ditto; For pad bases 1 m3
2) Backfilling
a) Return, fill in and ram selected excavated material 13 m3
around foundations
3) Disposal of Surplus spoils
Load and cart away surplus material from site to an 3
a) 20 m
approved dumping site
4) Hardcore fill
a) 300mm Thick hardcore fillings compacted in layers 65 m2
not exceeding 150mm deep and well watered
13 of 36
Goat Slaughter Slab
14 of 36
Goat Slaughter Slab
B STRUCTURAL FRAME
1) Reinforced Concrete
Insitu concrete class 25/20 , vibrated and
reinforced as described, in:-
a) Beams 3 m3
2) Reinforcement
High tensile steel reinforcement to B.S. 4461 in
structural concrete work including cutting,
bending, hoisting, fixing, tying wire and spacing
blocks
a) 8 mm diameter bars 84 kg
b) 12 mm diameter bars 125 kg
3) Formwork
Formwork in sawn finish at any level to:-
a) Sides and soffits of beams 32 m2
4) Structural steel work
Structural steelwork grade 4.3C (factory primed)
to be executed by an approved sub-contractor.
Unframed mild steel including hoisting and fixing
in position and including drilling holes, all
necessary welding, bolts plates/gusset plates and
other jointing whether or not specifically described
herein or shown on the drawing and with one coat
of red oxide primer after erection.(see the
drawings)
a) 200 x 5mm CHS beams fixed/bolted onto concrete 18 m
columns as per Structural Engineer details
15 of 36
Goat Slaughter Slab
C WALLING
1) Damp proof course
Three- ply bituminous felt damp proof course
bedded in cement and sand (1:4) mortar
(measured net allow for 300mm laps):-
a) 200mm wide 7 m
b) 150mm wide 6 m
2) External Walling
Machine cut natural stone walling,,load bearing
7N/mm², jointed bedded and jointed in cement
sand (1:3) mortar: reinforced with hoop iron after
every second course.
a) 200mm thick walling 22 m2
b) 200mm thick parapet walling 6 m2
TOTAL FOR WALLING CARRIED TO
SUMMARY
16 of 36
Goat Slaughter Slab
17 of 36
Goat Slaughter Slab
18 of 36
Goat Slaughter Slab
F WINDOWS
1) Window sills
a) 500mm wide x 50mm thick precast concrete 3 m
window sill pointed in cement and sand (1:3)
mortar; weather throated
2) Steel casement window
Supply and fix the following Mild steel medium
duty casement windows: custom made: including
50x 50 x 3mm Angle main frame and Standard 1
inch 'Z' section framing with T-sections
intermediate framing:12x12mm solid SHS grilles
welded to the window main frame internally;
complete with all iron mongery (butt hinges,
handles, catches e.t.c) and lugs fixed to
manufacturer's specifications : (glass has been
measured separately) (Refer to drawings for more
details)(All glass has been measured separately)
a) Window overall size 1000x 1500mm high 2 Nr
3) Glazing
6mm Thick obscure sheet glass and glazing to steel
2
a) To panes, 0.5-1.00m2 3 m
4) Painting
Prepare and apply two coats of grey oxide and two
coats of gloss oil paint on metal:-
a) General surfaces of steel windows (Both sides 6 m2
measured)
19 of 36
Goat Slaughter Slab
G FINISHES
1) Floor finishes
Insitu cement and sand (1:3) screed
a) 40mm thick steel trowelled finished 65 m2
b) Ditto; 100mm curved skirting 92 m2
2) Wall Finishes
Internal Walls : 12mm thick cement sand plaster,
with steel troweled finish, as described to:-
2
a) Wall and concrete surfaces internally 28 m
Prepare and apply two undercoats emulsion paint
and two finishing coats of first quality Silk Vinyl
emulsion paint as;-
b) Internal wall surfaces 28 m2
External Walls: 15mm Cement and sand (1:3)
render on block wall or concrete work to:-
c) Natural stone walling and concrete surfaces 28 m2
externally
External Walls: Fill uneven surfaces with stucco
filler to approval including sanding of all uneven
surfaces; apply two coats of white wash and two
finishing coats of premium quality acrylic latex
paint which is offering protection against severe
tropical weather as:
d) External walls surfaces 28 m2
20 of 36
Goat Slaughter Slab
BILL SUMMARY
A SUBSTRUCTURES
B STRUCTURAL FRAME
C WALLING
D ROOF AND RAIN WATER DISPOSAL
E WINDOWS
F FINISHES
G PRIME COST & PROVISIONAL SUMS
SUB-TOTAL
ADD:3% PRELIMINARIES
ADD: 5% CONTIGENCY
21 of 36
Milk and Meat Stalls
A SUBSTRUCTURE
1) Excavation and Earthwork (Provisional)
Clear the site of shrubs and all debris; remove from 2
a) 144 m
site as directed
b) Excavate to remove top vegetable soil average 144 m2
depth 200mm from ground level
c) Excavate in soft material for foundation trenches 70 m3
not exceeding 1.5m deep starting from reduced
level
d) Ditto; For pad bases 2 m3
2) Backfilling
a) Return, fill in and ram selected excavated material 37 m3
around foundations
3) Disposal of Surplus spoils
a) Load and cart away surplus material from site to an 35 m3
approved dumping site
4) Hardcore fill
300mm Thick hardcore fillings compacted in layers 3
a) 43 m
not exceeding 150mm deep and well watered
22 of 36
Milk and Meat Stalls
23 of 36
Milk and Meat Stalls
B STRUCTURAL FRAME
1) Reinforced Concrete
Insitu concrete class 25/20 , vibrated and
reinforced as described, in:-
a) Beams 7 m3
2) Reinforcement
High tensile steel reinforcement to B.S. 4461 in
structural concrete work including cutting,
bending, hoisting, fixing, tying wire and spacing
blocks
a) 8 mm diameter bars 224 kg
b) 12 mm diameter bars 336 kg
3) Formwork
Formwork in sawn finish at any level to:-
a) Sides and soffits of beams 92 m2
4) Structural steel work
Structural steelwork grade 4.3C (factory primed)
to be executed by an approved sub-contractor.
Unframed mild steel including hoisting and fixing
in position and including drilling holes, all
necessary welding, bolts plates/gusset plates and
other jointing whether or not specifically described
herein or shown on the drawing and with one coat
of red oxide primer after erection.(see the
drawings)
a) 200 x 5mm CHS beams fixed/bolted onto concrete 24 m
columns as per Structural Engineer details
24 of 36
Milk and Meat Stalls
C WALLING
1) Damp proof course
Three- ply bituminous felt damp proof course
bedded in cement and sand (1:4) mortar
(measured net allow for 300mm laps):-
a) 200mm wide 32 m
b) 150mm wide 9 m
2) External Walling
Machine cut natural stone walling,,load bearing
7N/mm², jointed bedded and jointed in cement
sand (1:3) mortar: reinforced with hoop iron after
every second course.
a) 200mm thick walling 89 m2
b) Ditto Gable walling 7 m2
3) Internal Walling
Machine cut natural stone walling,,load bearing
7N/mm², jointed bedded and jointed in cement
sand (1:3) mortar: reinforced with hoop iron after
every second course.
a) 150mm Thick walling 18 m2
b) 100mm Thick walling 29 m2
TOTAL FOR WALLING CARRIED TO
SUMMARY
25 of 36
Milk and Meat Stalls
26 of 36
Milk and Meat Stalls
27 of 36
Milk and Meat Stalls
E DOORS
Note: All doors to be supplied and fixed s per the
details and schedule provided. All iron Mongery
that has not been measured separately shall be
priced together with the corresponding door.
1) Timber Doors
The following in timber doors as per the details
provided
a) Door Frames, architraves and beads
i) Ex 150x50mm hardwood frame rebated 30 m
ii) 50x15mm hardwood architrave chamfered 30 m
iii) 15x15mm hardwood quadrant bead 30 m
b) Door Shutters
Solid-Core Flush Doors
Supply and fix the following solid core, hardwood
veneer laminated door shutter with hardwood
lipping all round; veneer and colour to be
approved (Refer to drawings for more details)(All
glass has been measured separately)
28 of 36
Milk and Meat Stalls
29 of 36
Milk and Meat Stalls
F WINDOWS
1) Window sills
a) 500mm wide x 50mm thick precast concrete 32 m
window sill pointed in cement and sand (1:3)
mortar; weather throated
2) Steel casement window
Supply and fix the following Mild steel medium
duty casement windows: custom made: including
50x 50 x 3mm Angle main frame and Standard 1
inch 'Z' section framing with T-sections
intermediate framing:12x12mm solid SHS grilles
welded to the window main frame internally;
complete with all iron mongery (butt hinges,
handles, catches e.t.c) and lugs fixed to
manufacturer's specifications : (glass has been
measured separately) (Refer to drawings for more
details)(All glass has been measured separately)
a) Window overall size 1000x 1200mm high 6 Nr
b) Window overall size 600x 600mm high 2 Nr
3) Glazing
6mm Thick clear sheet glass and glazing to steel
a) To panes, 0.5-1.00m2 7 m2
6mm Thick obscure sheet glass and glazing to steel
2
b) To panes, 0.5-1.00m2 1 m
4) Painting
Prepare and apply two coats of grey oxide and two
coats of gloss oil paint on metal:-
a) General surfaces of steel windows (Both sides 14 m2
measured)
30 of 36
Milk and Meat Stalls
G FINISHES
1) Floor finishes
Insitu cement and sand (1:3) screed
a) 40mm thick steel trowelled finished 144 m2
b) Ditto; 100mm curved skirting 35 m2
2) Wall Finishes
Internal Walls : 12mm thick cement sand plaster,
with steel troweled finish, as described to:-
2
a) Wall and concrete surfaces internally 190 m
Prepare and apply two undercoats emulsion paint
and two finishing coats of first quality Silk Vinyl
emulsion paint as;-
b) Internal wall surfaces 190 m2
External Walls: 15mm Cement and sand (1:3)
render on block wall or concrete work to:-
c) Natural stone walling and concrete surfaces 96 m2
externally
External Walls: Fill uneven surfaces with stucco
filler to approval including sanding of all uneven
surfaces; apply two coats of white wash and two
finishing coats of premium quality acrylic latex
paint which is offering protection against severe
tropical weather as:
d) External walls surfaces 96 m2
4) External Paved Areas
a) 600x600x50mm thick precast concrete paving slabs 225 m2
(standard) jointed in cement and sand mortar and
laid on 50mm thick sand bed (Sample of paving
slab to be provided by the Contractor for approval
by the site Engineer).
31 of 36
Milk and Meat Stalls
BILL SUMMARY
A SUBSTRUCTURES
B STRUCTURAL FRAME
C WALLING
D ROOF AND RAIN WATER DISPOSAL
E DOORS
F WINDOWS
G FINISHES
H PRIME COST & PROVISIONAL SUMS
32 of 36
Milk and Meat Stalls
1) Substructures
Excavation
a) Excavate foundation trenches starting from ground 32 m3
level not exceeding 1.5 meters deep and cart away
as directed
b) Ditto: For column bases 20 m3
c) Return, fill-in and rum selected excavated material 30 m3
d) Remove and cart away from site surplus excavated 22.2 m3
material as directed
Plain concrete class 10 (mix 1:4:8)
e) 50mm thick under column bases 1 m3
f) 50mm thick under strip footing 1 m3
Insitu concrete class 25, vibrated and reinforced as
described, in:-
g) Column bases 5 m3
3
h) Columns in foundations 1 m
3
i) Foundation strip 5 m
Reinforcement
High tensile steel reinforcement to B.S. 4461 in
structural concrete work including cutting,
bending, hoisting, fixing, tying wire and spacing
blocks
j) 8mm diameter bars 148 kg
k) 10mm diameter bars 81 kg
l) 12mm diameter bars 359 kg
Sawn formwork to insitu concrete as described:-
m) Sides of column bases 31 m2
n) Vertical sides of columns in foundations 23 m2
o) Vertical sides of foundation strip 18 m2
Foundation Walling
Natural stone ,load bearing 7N/mm², walling
bedded and jointed in cement sand (1:3) mortar:
reinforced with hoop iron after every second
course.
q) 200mm thick walling 56 m2
Superstructures
Medium dressed natural stone ,load bearing
7N/mm², walling bedded and jointed in cement
sand (1:3) mortar: reinforced with hoop iron after
every second course.
r) 200mm thick walling 131 m2
33 of 36
Milk and Meat Stalls
34 of 36
Milk and Meat Stalls
BILL SUMMARY
SUB-TOTAL
ADD:3% PRELIMINARIES
ADD: 5% CONTIGENCY
35 of 36
GRAND SUMMARY
PROPOSED VILLAGE MILK CENTER (VMC), MILK SALES POST, MEAT STALLS AND
SLAUGHTER
SLABS IN SALAAXLEY - SOMALILAND
GRAND SUMMARY
GRAND TOTAL
36 of 36