Documente Academic
Documente Profesional
Documente Cultură
NIM: 20181334011
FACULTY OF ENGINEERING
2019
1
FOREWORD
Thank God praise and gratitude we pray Allah glory to Him, because on the
overflow of blessings, mercy, and His guidance I can compose and finalize a report entitled
"MODELING OF SHIP USING maxsurf " is.
This paper was written to fulfill one of the tasks on Computer Aided Design
course at the University of Muhammadiyah Surabaya. With all the limitations, we are fully
aware that in writing this paper there are still many shortcomings, either in discussion or
grammar or how to write it. Therefore, with all humility presumably corrections and
suggestions that are build of all parties, especially the reader is our hope for the perfection of
this paper to the front
Finally, we expect this paper may be useful for us as writers in particular and to
the general reader, Wassalamualaikum Warahmatullahi Wabarakatuh.
2
TABLE OF CONTENTS
FOREWORD...................................................................................................... 2
CHAPTER 1 INTRODUCTION..........................................................................4
Background........................................................................................................ 4
Conclusion......................................................................................................34
Suggestion...................................................................................................... 34
REFERENCES ..................................................................................... 35
3
CHAPTER I
PRELIMINARY
A. Background
At this time the ship design process has followed the development of computer
technology. Designing ships are no longer made with manual techniques or
manufacture by drawing on the ship but now using computer software softwares
has advantages in many ways such as 3D visualization, providing the speed and
ease in calculation and design work, accuracy in the portrayal, calculation report
generation fast drawings and diagrams, Advances in computer technology have
also been touched marine structure design process. Conventional drawing
techniques to draw in 2D or have a lot of abandoned and switching to 3D
modeling. Modeling in 3D provides advantages such as providing visualization
significantly to the construction design of the building structure.
In the field of shipping, of course, will not escape from engineering design and
construction of the ship. The production process is not the same ship with the
production of the means of transport in general. To produce a ship begins with a
reservation by the owner. Furthermore, from the requirements listed, do planning
processes ranging from calculation to shipbuilding by lines plan and general
arrangement has been obtained from the results of previous calculations. It can be
seen that for designing a boat, to a process of continuous mutually from one stage
to another until the boat was feasible to produce.
In designing and designing the ship there are several methods that can be used,
one of which is with the help of a computer (Computer Aided Design). Computer
Aided Design is a computer program to draw a product or part of a product.
Products that want to be described can be represented by lines and symbols that
have certain meanings.CAD can be a two-dimensional images and three-
dimensional images.
Examples of special software 3D design in the field of shipping as modeller
maxsurf answer the needs of ship modeling in 3D.
4
1. What is a software maxsurf ?
2. Stages in the design of the ship with the help of software maxsurf
3. Calculating stability and arrest the ship with the help of software maxsurf
C. Purpose
1. To find out about the understanding of the design and implementation
2. To find out the ways and stages in designing a ship to become an integral
design and can be used
3. To find out how to use the software maxsurf
4. To be able to calculate the stability and arrest the ship with the help of
software maxsurf
5. To improve the skill and competence in making models of ships using
maxsurf.
5
CHAPTER II
BASIC THEORY
6
Several functions of this application program such as creating a balanced hull
form, in accordance with the requirements of stability, ship resistance, seakeeping and
power boats. Several functions of this application program such as creating a balanced
hull form, in accordance with the requirements of stability, ship resistance, seakeeping
and power boats.
7
CHAPTER III
STEP DESIGN (Maxsurf Modeler)
In this stage of the process with the help of software design maxsurf can be in many
ways one of which is by using a ready-made linesplan then converted into 3D form on
software maxsurf . There are several steps in making a linesplan into 3D form which
is as follows:
8
2. From linesplan was changed to an image that will be imported into the modeler
maxsurf
9
4. Import images on maxsurf modeller
The first step in doing in this case is click the appropriate FILE-IMPORT enter 3
looks at maksurf Front (Body Plan), side (Sheer Plan) and looked over (Half
breadth plan).
10
5. Specify "image set zero point" on the third view image
a. First come up with a body plan, click DISPLAY-IMAGE BACKGROUND SET
POINT ZERO and then click on the intersection of the center line and base line.
11
c. Second Half appear breadth plan
6. Determining the "set reference point" on the third eye to create the appropriate
image size of the original ship.
The first to appear Body plan. Then click DISPLAY - BACKGROUND - SET
IMAGE REFERENCE POINT and then click on the intersection of the top
water line to the center line and then input the appropriate distance to the
water line of 7.9 m deck and in the locker vertical derection then ok.
12
click DISPLAY - BACKGROUND - SET IMAGE REFERENCE POINT and then
click on the intersection of the next station with a base line, then input the appropriate
distance station, here I am using a 23 station with an overall length of 44 m and
remains in tranverse directionnya then ok.
7. Set the design grid by providing lines per section, Buttocks, and Waterline
a) First adjust the amount of sections / station
13
Click ADD and input the appropriate number of stations here I use the 23
station and then ok, then plih SPACE to adjust the distance per station, SPACE
STATION replaced from last in the step of charged according to the distance
station, here I use a distance of 2 m to distance per station ,
Click Buttocks PLANE - ADD and fill in the appropriate number of plane
battocks I use 6 battocks plane then ok.Then click SPACE - IN STEPS OF
replaced with distance per Buttocks I use a 1m per Buttocks.
14
Click WATER LINES -ADD Then fill in the number of water lines, I use a
water line 9 then ok. then click SPACE - IN STEPS OF replaced with
distance per water line I use space 1 m per weter lines.
15
To make surfaces click Surfaces - ADD SURFACE - Buttocks PLANE, and then
come up with a side view and set the width and height of the surface according to
the example image, how to change it at Surfaces - SIZE surfaces after appropriate
traffic measures come up front, open per control points according to the image
midship we want, and then come up with a side view to add control points per
station and set the appropriate control point lines already existing plane.
16
10. The addition of control points on each section
17
11. Opening the sealed surface by dragging control points on the "body plan"
sideways
18
12. Cover the front surface, by blocking the control points at the front and then offset
the control point setting rated 0
15. Vessel body formed by shifting the control point on the facade in accordance
linesplan
20
16. See the 3D results after shifted control point
17. If there are less delicate areas on the body of the ship could be crushed by
changing the "Long Stiffenes and Trans Stiffenes", from the outset 2 was changed
to three or more with max 10
21
18. Make a boat by adding surface transome "Section plane"
19. Shifts surface "Section Plane" section to 0 or AP and provide size on the surface
22
20. Enable "trim visible" to the surface to be made trim deck
21. Click on the body surface ship then right-click and select Start trim
23
22. Make decks, by increasing the surface "Water plane" in the size of ships
24
23. Trim on all surface is added to form the hull according to the design
25
24. result
26
body Plan
27
Half Breadth Plan
Sheer Plan
28
25. To see displacement if liking, can select data in the menu and select "Calculate
Hidrostatic"
29
B. SHIP RESISTAN ANALYSIS USING THE COMPTON METHOD OF
MAXSURF
To search for ship barriers can click analysis - medhotds - and then select the
appropriate type of boat here I use the ship displacement and select compton.
Then click window - 3 graph
30
31
To find out the results of the obstacles can be clicked two times on Legent
COMPTON
32
And to find the parameters carculation free surface can be clicked ANALYSIS -
FREE SURFACE PARAMETERS CARCULATION and content according to his
speed boat speed.
CHAPTER IV
CLOSING
CONCLUSION
After modeling using maxsurf, obtained vessel specifications that we want and be able to
know the resistance of the ship that we have a model with maxsurf maxsurf and software also
can be used as one of the software that is used for modeling a ship.
SUGGESTION
Hopefully with this report me as a writer is expected to improve my skills in modeling a ship
using maxsurf and to the reader is expected with this paper could be used as a learning tool
model ships using maxsurf, the last hope this report can be used as referansi journal modeling
of ships both for me and the reader ,
33
REFERENCES
https://www.scribd.com/document/346313956/Modul-Pelatihan-Maxsurf
https://www.academia.edu/23965239/PERANCANGAN_DIBANTU_KOMPUTER_TUGAS
_MAKALAH_AUTOCAD_CIVIL_3D
34