Sunteți pe pagina 1din 2

RE:

BSP 7.0 MT MODEX -PKG 077-01A : Balance Work for External Water System of SMS-III: Log...

Subject: RE: BSP 7.0 MT MODEX -PKG 077-01A : Balance Work for External Water System of SMS-III: Logging of Slurry Water
From: Amar Kumar <Amarkr@lntecc.com>
Date: Wed, 27 Mar 2019 04:07:46 +0000
To: "projsailbsp@mecon.co.in" <projsailbsp@mecon.co.in>
CC: "ashok_kumar@sail-bhilaisteel.com" <ashok_kumar@sail-bhilaisteel.com>, "meconbhilai@gmail.com" <meconbhilai@gmail.com>, edp
<ed_proj@sail-bhilaisteel.com>, G S Wadhwa <gswadhwa@sail-bhilaisteel.com>, "jmpalaiya@sail-bhilaisteel.com" <jmpalaiya@sail-
bhilaisteel.com>, "anupamswaroop@sail-bhilaisteel.com" <anupamswaroop@sail-bhilaisteel.com>, "skmehta@sail-bhilaisteel.com"
<skmehta@sail-bhilaisteel.com>, NK Garg <nkgarg@mecon.co.in>, VK Jha <vinayjha@mecon.co.in>, Devendra Sharma
<devendrasharma@mecon.co.in>, edp <ed_proj@sail-bhilaisteel.com>, Dipankar Bera <ber
<samir@lntecc.com>, Ashis Pal <palashis@lntecc.com>, Tanmoy Biswas <TB@lntecc.com>,
Arghya Ray Chaudhuri <Arghyarc@lntecc.com>, Animesh Santra <animeshsantra@lntecc.com
Swayambhu Sarkar <swayambhu@lntecc.com>

Dear Sir,

This is with reference to trailing email for slurry water logging near thickener and filter press pumping area.

Thickener area underflow pumps :

from discharge line near common


Sludge Storage Tank erneath of thickener during flushing. However, in case of
kener area.
There are chances of gland seal water leakage also from slurry pumps.

Filter Press building, pumping area :

rom discharge line near Filter Press, and


d floor of Filter press building during flushing. However, in case of maintenance or

There are chances of gland seal water leakage from slurry pumps.

system is preferred, near thickener and filter press area. As slurry discharge in
plant drain needs to be avoided, thus we feel pit with pumping system to Thickener/S

In this context, we would like to inform you that drain pumps have been provided in
ceed further.

Kind regards,
AMAR KUMAR

From: projsailbsp@mecon.co.in [mailto:projsailbsp@mecon.co.in]


Sent: 11 March 2019 10:14
To: Dipankar Bera <berad@lntecc.com>; Amar Kumar <Amarkr@lntecc.com>
Cc: ashok_kumar@sail-bhilaisteel.com; meconbhilai@gmail.com; edp <ed_proj@sail-bhilaisteel.com>; G S Wadhwa <gswadhwa@sail-bhilaisteel.com>;
jmpalaiya@sail-bhilaisteel.com; anupamswaroop@sail-bhilaisteel.com; skmehta@sail-bhilaisteel.com; NK Garg <nkgarg@mecon.co.in>; VK Jha
<vinayjha@mecon.co.in>; Devendra Sharma <devendrasharma@mecon.co.in>; edp <ed_proj@sail-bhilaisteel.com>
Subject: BSP 7.0 MT MODEX -PKG 077-01A : Balance Work for External Water System of SMS-III: Logging of Slurry Water

Dear Sir,

It is brought to our notice by BSP, Bhilai that Slurry water is logging under the thickener structure. Please be informed that while flushing of
the underflow pipe process, slurry water gets spread and accumulated on the thickener grade slab. This is posing severe operational
difficulties apart from safety of underflow pumpsets and other equipment installed underneath.

This problem could be mitigated to some extent if provision of proper slope for channeling the accumulated water to nearby drain / pit and its
evacuation would had been provided.

Further Slurry water logging in filter press building is also observed in the ground floor. Operational difficulties are being faced due to water
logging/accumulation in areas where filtrate and other related pumps of filter press are installed. Water logging results from seal water and
gland leakage of other pumps and due to non-availability of proper drain in the said area.

We request M/s L&T to look into the problem raised by BSP and take necessary action under intimation to us.

Looking forward for visit of concerned person of M/s L&T to site for necessary action.

Thanking You,

For MECON Limited

Debashish Bose
Manager (Project)

1 of 2 4/26/2019 4:55 PM
RE: BSP 7.0 MT MODEX -PKG 077-01A : Balance Work for External Water System of SMS-III: Log...

CAUTION: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

This Message and its contents is intended solely for the addressee and is proprietary.
Information in this mail is for L&T Business Usage only. Any Use to other than the addressee
is misuse and infringement to Proprietorship of L&T Construction. If you are not the
addressee please return the mail to the sender.
L&T Construction.

2 of 2 4/26/2019 4:55 PM

S-ar putea să vă placă și