Documente Academic
Documente Profesional
Documente Cultură
Modular Box
SERVER
Desktop
Access Point
Keystone
Patch Panel
Router Laptop
Switch
Figure1
Step 2 Given the IP Address set the server I.P. Address to static see Figure2
Figure2
Step 3 Check the following if your server is fully activated and has an IP
address see Figure3
Figure3
Step 4 Rename Computer Server to “Server1” on computer properties and
Enable Desktop Remote see Figure 4
Figure4
Step 5: Press Start Button and type “oobe” for the Initial Configuration Task to
pop up and Click on “Add Roles” See Figure5
Figure5
Set-up Computer Server Roles Steps YES NO
1. Active Directory Domain Services
2. DNS Server
3. DHCP Server
4. File Services
5. Print and Document Services
6. Remote Desktop Services
INSTALLING ACTIVE DIRECTORY DOMAIN SERVICES
Step 6: Click on Add Role, and add role wizard will appear click on Active
Directory Domain Services and follow the installation set up by pressing Next
and Install Button. Add .Net Framework 3.5.1 see Figure6
Figure6
Check the report information below if the installation was a success
Figure7
Step 8: Select Create new Domain Forest and Hit Next Button see Figure8
Figure8
Step 9: Next is you need to provide the server Domain Name Server eg: by
adding the following domain register “domain name”.com .net .org etc. see
Figure9
Figure9
Step 10: Set Forest Functional Level to Windows Server 2008 R2 see Figure10
Figure10
Step 11: Check Reboot on Completion for your server to finalize your DNS
Server Setup see Figure11
Figure11
Figure12
Step 13 By following the Installation Set-up put the Server I.P. Address DHCP
Server click validate if its valid as you see in Figure13
Figure13
Step 14 Adding Scope, Put the domain name in the scope name and type
“.scope” as its extension name Starting I.P. Address and End should be the
same as the routers range and default gateway see Figure14
Figure14
Step 15 Select Disable DHCPv6 as you progress throughout the installation
Set-up Computer Server Roles Steps YES NO
1. Active Directory Domain Services
2. DNS Server
3. DHCP Server
4. File Services
5. Print and Document Services
6. Remote Desktop Services
Figure16
Figure17
Figure18
Summary
4 Roles are installed these roles will be carried over before doing folder
redirection.
Set-up Computer Server Roles Steps YES NO
1. Active Directory Domain Services
2. DNS Server
3. DHCP Server
4. File Services
5. Print and Document Services
6. Remote Desktop Services
Note: Don’t Create Users or Organizational Unit if these roles are not yet
installed.
FILE REDIRECTION
Before you proceed on Role 5 and 6 you need to finish the following set-up
Users and Folder Redirection YES NO
1. Create Organizational Unit (Shared Folder)
2. Create Users
3. Folder Redirection
4. Log In Computer Clients
5. Create File Groups
6. File Screening
7. Proceed to Server Role Steps
Step 16. Create a Shared Folder on your local disk drives or Root Folder in this
situation the selected drive is Local Disk D:\ in File Services see Figure 16 right
Figure 16
Step 17. Right Click the folder and select sharing tab and click share and
share this folder check box, make sure you select everyone on the drop down
menu and add and make it read/write see Figure 17
Figure 17
Click on Advance Sharing and check if it’s on full control click on share this
folder
Figure 17.1
Step 18 now you’re ready to create Organizational Unit and Users all the users
information will be saved in this folder so make sure it’s fully shared, press
start button and drag your mouse in Administrative Tools and select Active
Directory Users and Computers see Figure 18
Figure 18
Expand your css.com domain name and right click your DNS to add your
Organizational Unit on New > Organizational Unit, you can name it same name
of your shared folder “Organizationalunit1”
A Folder will be added from the list of subfolders below and you must create
users inside that folder see Figure 18.1
Figure 18.1
Fill up the following information in creating users eg. User1 this user will be
your log in account on your client computers
Step 19. You can now add group policy Press start > Administrative tools > and
Group Policy Management see Figure 19
Figure 19
Inside Group policy management window Expand Forest: DNS > Domains >
DNS you can now view your created Organizational Unit and right click that
folder and the first Selection Create a GPO in this domain see Figure 19.1
Figure 19.1
After this a rename this link same with your Organizational Unit then a link
will appear in selections right click on this and select edit see the following
figure
Figure 19.2
Figure 19.3
Now a new window will appear proceed with this order Under User
Configuration > Policies > Windows Settings > Click on Folder Redirection and
set of folders will appear on the right side of the screen see Figure 19.4
Figure 19.4
Get the Network Path of your Shared folder in Local Disk this will be your link
from your created Users and your Organizational Unit Folder Copy the exact
location of this folder \\SERVER\Organizationalunit1 See Figure 19.5
Figure 19.5
Follow the image below right click the following folder and you can create a link
from your shared folder from your GPO to your Shared Folder (Organizational
Unit) Right Click each folder and click on properties select settings and enter
the full network path location of your folder see Figure 19.6
Figure 19.6
Start Menu will be different among these folders you will need to select this
configuration Redirect to the following location same network path and you can
resume your Folder Redirection
Figure 19.7
If you follow these steps you may proceed in logging in your user accounts and
linking each client’s computers to your server and a folder will appear from
your Shared folder in D: Drive
Users and Folder Redirection YES NO
1. Create Organizational Unit (Shared Folder)
2. Create Users
3. Folder Redirection
4. Log In Computer Clients
5. Create File Groups
6. File Screening
7. Proceed to Server Role Steps
File Screening
Step 20 Press Start >Administrative tools >File Server Resource Manager this
program will allow you to block files from your user accounts See Figure 20
Figure 20
Select File groups you can block file extension here so this will guide you how
to create a custom File Group Click on Create File Group
1.
2.
3.
Check the following directory what folder does this configuration aim