Documente Academic
Documente Profesional
Documente Cultură
Product specification
General information
Status September 2018
Technology SLS
Print volume
Max size of print diagonally⁰ 316 [mm] (12.4 [in])
Printer parameters
Size of Print Bed 150 x 200 x 260 [mm] (5.9 x 7.9 x 10.2 [in])
The layer height Z (min - max) 0,075 - 0,175 [mm] (0.003 - 0.007 [in])
Print features
Min. wall thickness from 0,4 [mm] (0.015 [in])
Information provided within this document are typical values for reference and comparison only. Parameters
presented in this data sheet are subject to change. Final part properties may vary based on printed part design
and print orientation. Material during tests - parameters are subject to change.
Coupling installed in Lisa Pro Pneumatic quick-coupling Male Plug Nipple DN7.2
Materials
15-76 [μm] (0,59 - 3 [mil]),
Powder PA11 - polyamide 11
average size 40 [μm] (1,6 [mil])
Software
Software² Sinterit Studio 2018
Communication
LCD screen Capacitive, color
Touchscreen 7 [in]
Heating system
Independent Heated: piston, cylinder, Feed Bad, Print Bad
Power
220-240 [V] AC, 50/60 [Hz], 7 [A] or
Power supply
100-130 [V] AC, 50/60 [Hz], 15 [A]
Packaging
Package contains LISA PRO 3D printer + Set of Accessories + Manual