Documente Academic
Documente Profesional
Documente Cultură
(c) A a = 2 m/s2
B
(a) 5 m/s (b)
3 m/s
(d) a = 10 m/s2 B
1s 1s A
2.5 s
m
(3) 1 m/s
(a) 1 (b) 2
(c) 3 (d) Equal in all 3 cases
4. In which of the following cases, the contact force (a) 3/2 m/s ↑ (b) 3/2 m/s ↓
between A and B is maximum (mA = m B = 1 kg)? (c) 1/2 m/s ↑ (d) 1/2 m/s ↓
CHAPTER TEST 8. In the arrangement shown in the figure, mass of the
block B and A is 2m and m respectively. Surface between m
A B
B and floor is smooth. The block B is connected to the µ v
block C by means of a string pulley system. If the whole
system is released, then find the minimum value of mass
of block C so that block A remains stationary w.r.t. B. L
Coefficient of friction between A and B is µ (>1)
(a) µgL (b) 2µgL
A (c) 3µgL (d) 2 µgL
10. Block B of mass 100 kg rests on a rough surface of
1
friction coefficient µ = . A rope is tied to block B as
B 3
shown in figure. The maximum acceleration with which
boy A of mass 25 kg can climb on rope without making
C block to move is
m 2m + 1
(a) (b)
µ µ −1
3m 6m
(c) (d)
µ −1 µ −1 100 kg
37°
9. With what minimum relative velocity should block be
B
projected from left end A towards end B such that it
µ = 1/3 A
reaches the other end B of conveyer belt moving with 25 kg
constant velocity v ? Friction coefficient between block
and belt is µ. 4g g g 3g
(a) (b) (c) (d)
3 3 2 4
Answers
1. (c) 2. (a) 3. (c) 4. (a) 5. (a) 6. (a,c) 7. (a) 8. (c) 9. (b) 10. (b)