Documente Academic
Documente Profesional
Documente Cultură
Double ank testing consists of rolling two gears together in tight mesh (preloaded one against another without
backlash) and measuring the center distance deviation as the parts rotate 360°. One of the gears in mesh is a
master gear with very small elementals errors and the other is the component to be tested. After rotating for
360°, a chart is created showing the center distance variation between the two gears.
Characteristics to Test
http://pentagear.com/en/double-flank-inspection/ 1/6
2/16/2019 Double Flank Gear Roll Tester
http://pentagear.com/en/double-flank-inspection/ 2/6
2/16/2019 Double Flank Gear Roll Tester
http://pentagear.com/en/double-flank-inspection/ 3/6
2/16/2019 Double Flank Gear Roll Tester
ND300 – HARDWARE
ND300 OPTIONS
ND300 SPECIFICATIONS
SOFTWARE
SUPPORT
http://pentagear.com/en/double-flank-inspection/ 4/6
2/16/2019 Double Flank Gear Roll Tester
Address
Service Provided
CONTRACT INSPECTION
METROLOGY SERVICES
METROLOGY SERVICES – CONTRACT INSPECTION
METROLOGY SERVICES – GAGE CERTIFICATION
Gear Measurement
http://pentagear.com/en/double-flank-inspection/ 5/6
2/16/2019 Double Flank Gear Roll Tester
http://pentagear.com/en/double-flank-inspection/ 6/6