Documente Academic
Documente Profesional
Documente Cultură
BIBLIOGRAFIE
[1]. A. A. Pesaran, “Battery Thermal Management in EVs and HEVs : Issues and
Solutions,” in Advanced Automotive Battery Conference, Las Vegas, Nevada, 2011.
[2]. A123 Energy Solution, Battery Pack Design, Validation, and Assembly Guide using
A123 Systems Nanophosphate® Cells, March 6, 2014, User Documentation
[3]. Ahmadou Samba. Battery Electrical Vehicles-Analysis of Thermal Modelling and
Thermal Management. Electric power. LUSAC (Laboratoire Universitaire des Sciences
Appliquées de Cherbourg), Université de caen Basse Normandie; MOBI (the Mobility, Logistics
and Automotive Technology Research Centre), Vrije Universiteit Brussel, 2015. English. <NNT :
2015CAEN2003>. <tel-01298416>
[4]. Al-Hallaj, S. and J.R. Selman, A novel thermal management system for EV batteries
using phase change material (PCM). Journal of the Electrochemical Society, 2000. 147: p. 3231-
3236.
[5]. Al-Hallaj, S., Safety and Thermal Management for Li-ion Batteries in Transportation
Applications, in EV Li-ion Battery Forum Europe 2012. 2012: Barcelona, Spain.
[6]. Andrews, J. and N. Jelley, Energy Science: Principles, Technologies, and Impacts.
2nd ed. 2013, Great Glarendon Street, Oxford, UK: Oxford University Press.
[7]. Axsen, J., A. Burke, and K. Kurani, Batteries for Plug-in Hybrid Electric Vehicles
(PHEVs): Goals and the State of Technology circa 2008. 2008, Institute of Transportation Studies:
Davis, CA.
[8]. Bandhauer, T.M. and S. Garimella, Passive, internal thermal management system
for batteries using microscale liquid-vapor phase change. Applied Thermal Engineering, 2013.
61: p. 756-769.
[9]. Bandhauer, T.M., S. Garimella, and T.F. Fuller, A Critical Review of Thermal
Issues in Lithium-ion Batteries. Journal of Electrochemical Society, 2011. 158(3): p. R1-R25.
[10]. BEHR, Thermal Management for Hybrid Vehicles, in Technical Press Day. 2009.
[11]. Calculating the loads for liquid cooling system, Qpedia, Jun 09.
[12]. Chau, K.T., Y.S. Wong, and C.C. Chan, An overview of energy sources for
electric vehicles. Energy Conversion and Management, 1999. 40(10): p. 1021-1039.
[13]. Chen, Y. and J.W. Evans, Heat transfer phenomena in lithium/polymerelectrolyte
batteries for electric vehicle application. Journal of the Electrochemical Society, 1993. 140(7): p.
1833-1838.
63
MĂGLAȘ Raul Ionuț Bibliografie
[14]. Choi, K.W. and N.P. Yao, Heat Transfer in Lead-Acid Batteries Designed for
Electric-Vehicle Propulsion Application. Journal of Electrochemical Society, 1979. 126(8): p.
1321-1328.
[15]. Choi, K.W. and N.P. Yao, Heat Transfer in Lead-Acid Batteries Designed for
Electric-Vehicle Propulsion Application. Journal of Electrochemical Society, 1979. 126.
[16]. Cluzel, C. and C. Douglas, Cost and Performance of EV Batteries, in Final report
for The Committe on Climate Change. 2012, Element Energy Limited.
[17]. DieselNet. Emission Test Cycles: Japanese 10-15 Mode. 2012;
http://www.dieselnet.com/standards/cycles/jp_10- 15mode.php.
[18]. Doug. Roadster battery (ESS). 2010;
http://www.teslamotorsclub.com/showthread.php/3810-Roadsterbattery-.
[19]. Europen Environment Agency, Final energy consumption by sector (CSI
027/ENER 016) - Assessment published Feb 2013. Europen Environment Agency.
[20]. Gaines, L. and R. Cuenca, Costs of Lithium-Ion Batteries for Vehicles. 2000,
Argonne National Laboratory.
[21]. Gkikas, N., Automotive Ergonomics: Driver-Vehicle Interaction. Human-Machine
Interaction (HMI) in the Time of Electric Vehicles, ed. N. Gkikas. 2013, Boca Raton, Finland:
CRC Press.
[22]. Hirota, Y. and S. Ogasawara, Electric Vehicle Engineering. 2010, Morikita,
Tokyo.
[23]. Hsiao, E. and C. Richter, Electric Vehicles: Special Report. 2008, CLSA.
[24]. Jarrett, A. and Y. Kim, Design optimization of electric vehicle battery cooling
plates for thermal performance. Journal of Power Sources, 2011. 196: p. 10359-10368.
[25]. Ji, Y. and C.Y. Wang, Heating strategies for Li-ion batteries operated from
subzero temperatures. Electrochimica Acta, 2013. 107: p. 664- 674.
[26]. Jin, L.W., et al., Ultra-thin minichannel LCP for EV battery thermal management.
Applied Energy, 2014. 113: p. 1786-1794.
[27]. Kenneth, J.K. and A. Rajagopalan, Benchmarking of OEM hybrid electric
vehicles at NREL, N.R.E. Laboratory, Editor. 2001: Golden, Colorado.
[28]. Khateeb, S.A., et al., Design and simulation of a lithium-ion battery with a phase
change material thermal management system for an electric scooter. Journal of Power Sources,
2004. 128: p. 292-307.
[29]. Khateeb, S.A., et al., Thermal management of Li-ion battery with phase change
material for electric scooter: experiment validation. Journal of Power Sources, 2005. 142: p. 345-
353.
64
MĂGLAȘ Raul Ionuț Bibliografie
[30]. Kim, G.H. and A.A. Pesaran, Battery thermal management system design
modeling, in 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Conference and
Exhibition. 2006: Yokohama, Japan.
[31]. Kizilel, R., et al., An alternative cooling system to enhance the safety of Li-ion
battery packs. Journal of Power Sources, 2009. 194(2): p. 1105- 1112.
[32]. Kocsis Levente Botond, Studii și cercetări privind posibilitățile de îmbunătățire a
performanțelor M.A.I. prin intermediul supraalimentării, 2012
[33]. Lache, R., et al., Electric Cars: Plugged In - Batteries must be included. 2008,
Deutsche Bank Securities Inc.
[34]. Ladrech, F., Battery Thermal Management for HEV & EV – Technology overview,
65
MĂGLAȘ Raul Ionuț Bibliografie
[46]. Pesaran, A.A., Battery thermal models for hybrid vehicle simulations. Journal of
Power Sources, 2002. 110: p. 337-382.
[47]. Pesaran, A.A., et al., Tools for Designing Thermal Management of Batteries in
Electric Drive Vehicles, in the Large Lithium Ion Battery Technology & Application Symposia
Advanced Automotive Battery Conference 2013: Pasadena, CA.
[48]. Pesaran, A.A., S. Burch, and M. Keyser, An approach for designing thermal
management systems for electric and hybrid vehicle battery packs, in Fourth vehicle thermal
management systems conference and exhibition. 1999.
[49]. QC/T 743-2006: Lithium-ion Batteries for Electric Vehicles, in QC/T 743-2006.
2006.
[50]. R. Farreny, X. Gabarrell, and J. Rieradevall, “Energy intensity and greenhouse
gas emission of a purchase in the retail park service sector: An integrative approach,” Energy
Policy, vol. 36, no. 6, pp. 1957–1968, Jun. 2008.
[51]. Ramadassm, P., et al., Capacity fade of Sony 18650 cells cycled at elevated
temperatures Part II. Capacity fade analysis. Journal of Power Sources, 2002. 112(2): p. 614-620.
[52]. Rao, Z.H. and S.F. Wang, A review of power battery thermal energy management.
Renewable and Sustainable Energy Reviews, 2011. 15(9): p. 4554-4571.
[53]. Rao, Z.H., S.F. Wang, and G.Q. Zhang, Simulation and experiment of thermal
energy management with phase change material for ageing LiFePO4 power battery. Energy
Conversion and Management, 2011. 52: p. 3408-3414.
[54]. Sato, N., Thermal Behaviour analysis of lithium-ion batteries for electric and hybrid
vehicles. Journal of Power Sources, 2001. 99(1-2): p. 70-77.
[55]. Shimada, M., A vehicle driven by electricity, designed for chill and snowy areas.
Sensors and Actuators A: Physical, 2013. 200: p. 168-171.
[56]. Shimada, M., Magnetic Materials in Vehicles Driven by Electricity, in The 2010
Hirosaki University International Symposium, The 2nd International Symposium: Energy and
Environment in Aomori. 2011, Hirosaki University Press: Hirosaki. p. 53-56.
[57]. Simons, R., Estimating Temperatures in a Water-to-Air Hybrid Cooling System,
Electronics Cooling, May 2002
[58]. Srinivasan, V., Batteries for Vehicular Applications. 2008, Lawrence Berkeley
National Lab: Berkeley, CA.
[59]. Stuart, T.A. and A. Hande, HEV battery heating using AC currents. Journal of
Power Sources, 2004. 129: p. 368-378.
[60]. TeslaMotor. Increasing energy density means increasing range.
http://www.teslamotors.com/sv_SE/roadster/technology/battery.
66
MĂGLAȘ Raul Ionuț Bibliografie
67