Documente Academic
Documente Profesional
Documente Cultură
FABRIC
a. No fabric defects, including: holes, stains, weak spots, mispicks, knots, slubs, soil, or
other flaws.
Yes
b. No streaking, fade lines, heavy barré or foreign matter, unless characteristic of fabric
type.
Yes
c. No large or long slubs (inherent in some natural fabrics) to be found in front of
garment, which detracts from garment appearance.
Yes
d. No uneven print repeats, off-register prints, off-grain prints, or inconsistent print
repeats.
Yes
STITCHING
a) Required stitch length is 10-12 stitches per inch (SPI) and must be consistent
throughout garment. Required stitch length for topstitching is 10-12 SPI, except
heavyweight outerwear, which is 8-10 SPI.
9
b) Stitch tension is balanced, so there are no puckers or thread loops.
No, on the back side of the neck
c) No broken or skipped stitches.
Yes
d) Topstitching is consistently even and parallel from edge or from another line of
topstitch.
Yes
e) No needle cuts, chews, or thread jams.
Yes
f) Bartacks or back-tacks at garment stress points.
No
g) No conspicuous, overlapped stop-and-start stitching.
Yes
h) No hand repairs or darning.
Yes
THREAD
a. Thread colour matches or complements ground colour for all seams and
topstitching unless another colour is pre-approved.
Yes
b. Thread colour is consistent throughout garment.
Yes
c. No monofilament thread on any part of garment or labels.
No, for stitching seqin.
d. Thread tails clipped and removed from garment.
No, thread tails were visible
SEAMS
COUNTRY OF ORIGIN= No
FABRIC
a. No fabric defects, including: holes, stains, weak spots, mispicks, knots, slubs, soil, or
other flaws.
Yes
b. No streaking, fade lines, heavy barré or foreign matter, unless characteristic of fabric
type.
Yes
c. No large or long slubs (inherent in some natural fabrics) to be found in front of
garment, which detracts from garment appearance.
Yes
d. No uneven print repeats, off-register prints, off-grain prints, or inconsistent print
repeats.
Yes
STITCHING
a. Required stitch length is 10-12 stitches per inch (SPI) and must be consistent
throughout garment. Required stitch length for topstitching is 10-12 SPI, except
heavyweight outerwear, which is 8-10 SPI.
10
b. Stitch tension is balanced, so there are no puckers or thread loops.
Yes
c. No broken or skipped stitches.
Yes
d. No needle cuts, chews, or thread jams.
Yes
e. Bartacks or back-tacks at garment stress points.
No
f. No conspicuous, overlapped stop-and-start stitching.
Yes
g. No hand repairs or darning.
Yes
THREAD
a. Thread color matches or complements ground color for all seams and
topstitching unless another color is pre-approved.
Yes
b. Thread color is consistent throughout garment.
Yes
c. No monofilament thread on any part of garment or labels.
Yes
d. Thread tails clipped and removed from garment.
Yes
SEAMS