Sunteți pe pagina 1din 83

General Abstract

S.No Name of the building Amount In Rs.

KREEDA VIKASA KENDRAM INDOOR HALL AT


1 PUNGANUR, CHITTOOR DISTRICT. 760,345.00

TOTAL AMOUNT 760,345.00


ELECTRICAL
NAME OF THE WORK: KREEDA VIKASA KENDRAM ESTIMATE
INDOOR HALL AT PUNGANUR,
DISTRICT.
(SSR Based on SSR 2018-19)

Sub work: Electrification


S. Quantity Description of Work Unit
NO.
CONDUIT PIPE
1 600 RM Supply and fixing of 25mm outer dia Heavy grade RMT
PVC pipe (ISI MARK) concealed in Roof Slabs with all
required MS deep boxes and all accessories including
and labour charges etc., complete.
Makes:- Sudhakar/Modi/GM/AKG/VIP.

2 500 RM Supply and fixing of 25mm outer dia Medium grade RMT
P.V.C. pipe (ISI MARK) concealed in wall with all
required MS/GI junction boxes and all accessories
including masonary worketc., complete.
Makes:- Sudhakar/Modi/GM/AKG/VIP.

3 15 Nos Supply and fixing PVC / MS galvanished Fan hook box EACH
with hook in RCC slab in lieu of MS Deep box
including all Labour charges etc., complete.

WIRING
4 119 PTS Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS EACH
P.V.C. insulated flexible copper cable (ISI MARK) in POINT
existing pipe with 6A Modular switch, Ceiling
rose/BH/SBH Modular switches with cover plate and
GI switch box including all labour charges etc.,
complete. (for Non Residential Building)
Makes of wires:- Finolex/ RR Kabel/ Havells/
Polycab / HPL / RPG / GM / Million / Gold
Medal / Power Flex.
Makes of switches:- GM Four-Five/ Legrand
Arteor/ Schneider Zen celo/ MK Blenge / Cabtree
Thames Platinum / Million Logus / Gold Medal
Curve.

5 16 PTS Wiring with three runs of 1.5 sq.mm FRLS P.V.C. EACH
insulated flexible copper cable (phase, neutral, earth) POINT
in the existing conduit pipe with 6 Amps Modular type
switch, and 6 A 3/2 pin Modular type socket with
cover plate and GI switch box on common switch
board etc., complete.
Makes of wires:- Finolex/ RR Kabel/ Havells/
Polycab / HPL / RPG / GM / Million / Gold Medal /
Power Flex.
Makes of switches:- GM Four-Five/ Legrand Arteor/
Schneider Zen celo/ MK Blenge / Cabtree Thames
Platinum / Million Logus / Gold Medal Curve.
S. Quantity Description of Work Unit
NO.
6 10 NOS Supply & fixing of 16A/6A, 2 in one socket with 16A EACH
switch control modular type with and GI switch box
with front cover plate including all labour charges
etc., complete.
Makes of switches:- GM Four-Five/ Legrand Arteor/
Schneider Zen celo/ MK Blenge / Cabtree Thames
Platinum / Million Logus / Gold Medal Curve.

RUN of MAINS
7 300 RM Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS RMT
P.V.C. insulated flexible copper cable in existing
conduit pipe for earth continuity including all labour
charges etc., complete.
Makes of wires:- Finolex/ RR Kabel/ Havells/
Polycab / HPL / RPG / GM / Million / Gold Medal /
Power Flex.

8 400 RM Supply and run of 3 of 2.5 sq.mm (phase neutral and RMT
earth) FRLS PVC insulated flexible copper cable in
existing conduit pipe for individual ligting circuits
including labour charges etc., complete as required
for switch boards.
Makes of wires:- Finolex/ RR Kabel/ Havells/
Polycab / HPL / RPG / GM / Million / Gold Medal /
Power Flex.

9 200 RM Supply and 3 runs of 4.0 sq mm (phase neutral and RMT


earth) FRLS PVC insulated flexible copper cable in
existing conduit pipe for run of mains including
labour charges etc., complete as required including
labour charges for 16A sockets.
Makes of wires:- Finolex/ RR Kabel/ Havells/
Polycab / HPL / RPG / GM / Million / Gold Medal /
Power Flex.

10 30 RM Supply and 3 runs of 6.0 sq mm (phase neutral and RMT


earth) FRLS PVC insulated flexible copper cable in
existing conduit pipe for run of mains including
labour charges etc., complete as required including
labour charges for 16A sockets.
Makes of wires:- Finolex/ RR Kabel/ Havells/
Polycab / HPL / RPG / GM / Million / Gold Medal /
Power Flex.
S. Quantity Description of Work Unit
NO.
11 50 RM Supply & run of 4 of 16.0 Sqmm (phases, neutral and RMT
earth) FRLS PVC insulated flexible copper cable in the
existing conduict pipe for run of mains from Power
panel board to TPN DB"s with pin type lugs and
connections etc., complete. [for LDBs]
Makes of wires:- Finolex/ RR Cable/ Havells/ HPL/
RPG/ Power flex / GM / Million / Gold Medal.

DISTRIBUTION BOARDS
12 1 NOS Supply and fixing of TPN 4 way distribution board IP- EACH
43 (8+12 Module) with provision to accommodate the
ELCB incomer and suitable for single pole outgoing
MCB's in sheet Steel enclosure with 40/63A 4 pole
MCB as incomer and 12 No of 6 to 32 Amps single
pole, 10 KA breaking capacity 'c' Curve MCB outgoings
including making connections etc., complete
concealing in wall. (LIGHTING DB's) Makes :
Legrand / Schneider.

13 1 NOS Supply and fixing of TPN 4 way distribution board IP- EACH
43 (8+12 Module) with provision to accommodate the
ELCB incomer and suitable for single pole outgoing
MCB's in sheet Steel enclosure with 63A 4 pole MCB
as incomer and 12 No of 6 to 32 Amps single pole, 10
KA breaking capacity 'c' Curve MCB outgoings
including making connections etc., complete
concealing in wall.
Makes : Legrand / Schneider.
S. Quantity Description of Work Unit
NO.
EARTHINGS
14 2 Providing independent earthing for Important EACH
equipment with 40mm dia 'B' class 2.5m long G.I pipe
and 19mm dia 'B' class G.I pipe of 0.3mtr. long
connected with reducer providing G.I funnel with
mesh enclosed in C.C.Chamber of 400m x 400m x
400mm with R.C.C. Slab cover duly providing
staggered holes filling with salt and charcoal from the
bottom of the pipe giving earth connection from
electrode through G.I strip of 40 x 6mm x 200mm
length with all accessories and labour charges
complete, as per IS specifications 732/1982 (Part II)

15 20 RM Supply and run of 25mmX6mm GI strip including cost RMT


of all accessories and labour charges etc complete.

16 10 RM Supply and run of50mmX6mm GI strip including cost RMT


of all accessories and labour charges etc complete.

17 30 RM Supply and run of No. 8SWG GI wire including cost of RMT


all accessories and labour charges etc complete.

FIXTURES
Supply and transportation of 60W LED HIgh Bay
Luminaire with high power COB LED made of pressure
diecast alluminium housing with powder
coated,Supply Input voltage 120 - 270 V AC, P.F >
0.90, high power LED's having efficacy >95
lumines/watt, System efficacy >95lm/W and junction
temprature < 70°C, with Ingrees protection IP65,
IK05, Driver surge protection 4KV, external Surge
protection ≥ 5KV with wide/ Narrow beam optics,
THD<10% at 110 Volts AC, driver efficiency >90%,
CCT: 3000K - 5700K, minimum CRI>70, etc.,
complete
a) LUMINAIRE MAKE : WIPRO / PHILIPS / GE /
Lighting Technologies(LT) / CROMPTON / BAJAJ /
VIN /HAVELLS/CAPART(PREMIUM)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG .

18 20 NOS 60W EACH


S. Quantity Description of Work Unit
NO.
19 53 NOS Supply and Transportation of 20W slim LED tube fixed EACH
on the existing batten with Driver, operating voltage
range of 150 to 265 Volts AC, Power factor > 0.9 with
LED's having efficacy of > 90 lumins/watt etc.,
complete with 3 years warranty of makes Phillips / GE
/ Crompton / VIN / Bajaj / Havells / Halonixith.

20 8 NOS Supply and fixing of ISI mark batten holder / slanting EACH
holder Makes : Anchor / Gold Medal Olive / Million
Zoom in lieu of ceiling rose of light point complete
with all connections and all labour charges with 5.0W
LED Lamp Makes: Phillips / OSRAM / GE / Crompton /
VIN / Bajaj / Havells / Halonix / HPL/Surya/Sysa.
21 11 NOS Supply of 48" (1200mm) Sweep 5 Star rated Ceiling EACH
Fan without Regulator.
Makes : Crompton High Speed Decora / Bajaj
Regalstar / Havells Fusion 50 / Orient Summer
Crown /Usha technix decorative

22 11 NOS Supply and fixing of modular Electronic stept type fan EACH
regulator hum free step type socket size with MS
box, front plate in the existing switch board
( Modular Type )
Makes of switches:- GM Four-Five/ Legrand Arteor/
Schneider Zen celo/ MK Blenge / Cabtree Thames
Platinum / Million Logus / Gold Medal Curve.

23 2 RM Supply and erecting 19/20mm steel tube down rod of EACH


one meter length with bolts & nuts duly painted with
matching colour of fan complete.

24 11 NOS Labour charges for Fixing of Ceiling fan including EACH


giving connections with twin core wire etc., complete.

25 16 NOS Supply,Transportation of Heavy duty exhaust fan EACH


12"(300 mm) size 900 rpm with metal blades
wiremesh with all accessories etc complete.
Makes : Crompton / Almounard / Havells Turbo Force.

26 16 NOS Labour charges for fixing of Exhaust fan in wall with EACH
necessary connections and masonary work of making
hole, finishing etc., complete.

U.G CABLES
27 Supply of the Following PVC XLPE armoured cable
1100 V Grade with ISI mark stranded / solid,
aluminimum conductor complete
Make: Torrent / Universal / Unicab / Polycab / Havells
/ KEI.
S. Quantity Description of Work Unit
NO.
a 50 RM 4 Core 16.00 Sq.mm. RMT
b 30 RM 2 Core 6.00 Sq.mm. RMT

28 15 RM Earth work excavation of Trench in hard ground soil, RMT


laying of U.G cables upto 70 Sq,mm on sand cushion
covering the cable with bricks and back filling of
Trench duly providing route indicator embedded in
C.C including cost and conveyance of materials and
labour charges etc., complete.

29 15 RM Labour charges for run of U.G cable on wall / existing RMT


pipe/tray with necessary fixing arrangments such as
saddles, clamps,wooden separators etc., (as directed
by departmental official) for the cables.

LT CABLE TERMINATIONS:
30 Supply and Fixing of single compression brass cable
glands for following armoured cable with brass
washers, lugs etc., complete.
a 2 NO 4 Core 16.00 Sq.mm. EACH

31 4 NO Fabrication, Transportation and supply of hot-dip galvanized EACH


Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate
for shaft, IS 2062 for base plate with door opening
arrangement, including the supply of suitable boards with
bakelite sheet and MCB's as per IS specification suitable to
withstand the wind speed of 180 KMPH for 9 Mtrs height Pole
having dimensions Bottom 155 mm,. Top 70mm with 3mm
thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750
long 'J' bolts along with template of Makes: Bajaj /
Valmont /TRANSRAIL.

32 4 Fabrication, Transportation and supply of 1.50 Mtr Length EACH


Single Arm Bracket made with MS galvanized 40mm / 50mm
dia Pipe.
S. Quantity Description of Work Unit
NO.
33 4 NO Foundation and erection charges with special T&P, for EACH
9Mtrs / 10Mtrs long Octagonal / Conical pole duly erecting on
base plate duly providing 4 Nos foundation bolts with nuts
with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc
work vibrated concreting mixing with necessary steel (15kgs)
reinforcement and curing for 7 days as directed by the field
engineers during execution including excavation of Earth/BT
all labour charges and cost and conveyance of materials
etc.complete.

34 4 NO Supply and transportation of 60W LED Street light Luminaire EACH


made of pressure diecast alluminium body with powder
coated, having toughned glass cover input voltage range of
100 to 270 volts AC, power factor > 0.90, high power LED's
having efficacy 120 lumines/watt and junction temprature <
85 degree centegrade of IP 65 with optics, total hormonic
destortion less than 15% at 110 Volts AC, driver efficiency
>90% etc., complete with 5 years warranty. a) LUMINAIRE
MAKE: SURYA / MIC / BLU / KRIPA LIGHTS / FORTUNE ART /
CAPART/ SEMTRONICS / SYSKA. b) LED MAKE: PHILIPS
LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG.

35 1 NO Supply of Automatic Street Light Control System with EACH


Optical Sensor, Low volatage / High voltage trip and
reset, operating voltage 150 - 280V AC per Phase, 50
HZ with suitable SMC enclousure of IP 54 protection,
MCBs and contactor suitable to control the load of 8
KW of Three phase load with necessary clamping
arrangements.Make: Swadeep Nature Switch or its equivalent.

V - FIRE EXTINGUISHERS
S. Quantity Description of Work Unit
NO.
36 4 Nos Supply and fixing of ISI mark (IS:15683) Mono EACH
ammonium phosphate powder 90 (MAP) 6 Kg Fire
extinguisher, stored pressure type, pressure gauge,
gross wt. 9.4 kg, empty wt.3.4 kg, Discharge time
minimum 13 sec, controllable discharge mechanism,
range min. 4 mts applicable on classes A,B, C &
electrically started fire, A rating - 4 A, B rating -34 B,
can construction: Deep drawn and Co2 mig welding,
Valve construction: Forging & Machining, internal
coating of can: Epoxy powder coating, External
coating of Can:Epoxy polyster powder coating, sheet
metal thickness:1.60mm, Helium leak detection
tested with 5 years warranty Including transportation,
all taxes and all labour charges etc complete.
Makes: Safex / Kenex / Bharat / Reliance.
( SSR - 17-18 - 9.4.8 )

GRAND TOTAL:
ELECTRICAL
IKASA KENDRAM ESTIMATE
INDOOR HALL AT PUNGANUR, CHITTOOR
DISTRICT.
SSR Based on SSR 2018-19)

Sub work: Electrification


Rate (Rs.) Amount
in fig. (Rs.)

62.42 37452.00

71.52 35760.00

76.00 1140.00

548.17 65232.23

426.67 6826.72
Rate (Rs.) Amount
in fig. (Rs.)
583.50 5835.00

20.69 6207.00

78.31 31324.00

119.25 23850.00

123.15 3694.50
Rate (Rs.) Amount
in fig. (Rs.)
550.00 27500.00

5169.50 5169.50

7945.00 7945.00
Rate (Rs.) Amount
in fig. (Rs.)

4036.79 8073.58

96.66 1933.20

175.83 1758.30

16.01 480.30

8998.00 179960.00
Rate (Rs.) Amount
in fig. (Rs.)
849.50 45023.50

279.25 2234.00

2323.00 25553.00

406.50 4471.50

133.00 266.00

119.50 1314.50

2750.00 44000.00

577.35 9237.60
Rate (Rs.) Amount
in fig. (Rs.)
135.00 6750.00
85.00 2550.00

185.00 2775.00

39.00 585.00

121.63 243.26

17800.00 71200.00

1650.00 6600.00
Rate (Rs.) Amount
in fig. (Rs.)
6300.00 25200.00

6700.00 26800.00

14600.00 14600.00
Rate (Rs.) Amount
in fig. (Rs.)
5200.00 20800

760345.00
FINISHED DATAS 2016-17
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
PVC pipe
1 1.4.2(c) Supply and Fixing of 25mm outer dia Heavy grade PVC
pipe (ISI MARK) concealed in Roof Slabs with all
required MS deep boxes and all accessories including
and labour charges etc., complete.
Makes:- Sudhakar/Modi/GM/AKG/VIP.

Taking Output = 100 M


a) Material
1.2.4 25mm dia 2.2 mm thick PVC pipe 1M 100 31.8 3180
1.1.11 25mm dia MS 1,2,3 & 4 way deep MS Deep Junction Each 12 39 468
Box
1.2.37 25mm PVC bends Each 12 6 72
b) Labour charges :
8.1.73 Skilled Electrician day 2 480.00 960
8.1.74 Semi skilled Electrician day 2 415.00 830
8.1.81 Helpers day 2 370.00 740
Sundries like binding wire, shellac, sand etc.,
C) Cost for 100 RM 6250.00
Rate per Metre 63.00

2 1.4.2(b) Supply and Fixing of 25mm outer dia Medium grade


P.V.C. pipe (ISI MARK) concealed in wall with all required
MS Deep Boxes and all accessories including .
Makes:- Sudhakar/Modi/GM/AKG/VIP.

Taking Output = 100 M


a) Material
1.2.3 25mm dia 1.5mm thick PVC pipe 1M 100 25.4 2540
8.1.3 U' Links 100 2 44 88
Nos
1.1.7 25mm dia MS 1,2,3 & 4 way MS Junction Box Each 12 24 288
1.2.37 25mm PVC bends Each 12 6 72

8.1.49 Cement kg 50 6.6 330


b) Labour charges :
8.1.73 Skilled Electrician day 2 480.00 960
8.1.74 Semi skilled Electrician day 2 415.00 830
8.1.81 Helpers day 2 370.00 740
8.1.75 Mason Ist class day 2 415.00 830
Sundries 2.5
C) Cost for 100 RM 6680.50
Rate per Metre 67.00

3 9.7.24 Supply and erecting PVC/GI/MS Galvanished fan hook


box with hook in RCC slab including all Labour charges
etc., complete.
a) Material
8.1.21 PVC/ MS with hook in RCC Fan hook each 1 100.00 100.00
1.1.11 MS Box ( LESS COST OF DEEP BOX ) each 1 39.00 39.00

Rate per Each 61.00

Modular Page No : 18
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
LIGHT POINT WITH MODULAR SWITCH
Non - Residential Buildings
LIGHT POINT WITH MODULAR SWITCH IN RB & NRB
Makes of wires:- Finolex/ RR Kabel/ Havells/ Polycab
/ HPL / RPG / GM / Million / Gold Medal / Power
Flex.
Makes of switches:- GM Four-Five/ Legrand Arteor/
Schneider Zen celo/ MK Blenge / Cabtree Thames
Platinum / Million Logus / Gold Medal Curve.

4 Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire


Retardant (FR) P.V.C. insulated flexible copper cable (ISI
MARK) of in existing pipe with 6A switch, Ceiling
rose/BH/SBH of Modular switches withMS modular
switch box, cover plate including all labour charges etc.,
complete for light, bell, fan and exhaust fan points in
Non-Residential Buildings

Taking Output = 6 Points


a) Material
1.5.2 22/0.3mm FR PVC copper wire 100 M 1
1358 1358
1.9.1 6A Switch 1 way modular switch each 6 63 378
1.7.13 6A 2 way Ceiling Rose 3 plate Anchor/GM each 6 21 126
1.9.20 6 Module cover frame each 1 108 108
1.3.4 6 Module box each 1 130 130

b) Labour charges :
8.1.73 Skilled Electrician day 0.6 480.00 288
8.1.74 Semi skilled Electrician day 1.2 415.00 498
8.1.81 Helpers day 0.6 370.00 222
Sundries
C) Cost for 6 Points 3108.00
Rate per Point 518.00

Residential Buildings

5 Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire


Retardant (FR) P.V.C. insulated flexible copper cable (ISI
MARK) of in existing pipe with 6A switch, Ceiling
rose/BH/SBH of Modular switches withMS modular
switch box, cover plate including all labour charges etc.,
complete for light, bell, fan and exhaust fan points in
Residential Buildings

Taking Output = 6 Points


a) Material
1.5.2 22/0.3mm FR PVC copper wire 100 M 1
1358.00 1358.00
1.9.1 6A Switch 1 way modular switch each 7 63.00 441.00
1.7.13 6A 2 way Ceiling Rose 3 plate Anchor/GM each 7 21.00 147.00
1.9.21 8 Module cover frame each 1 137.00 137.00
1.3.5 8 Module box each 1 170.00 170.00

Modular Page No : 19
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
b) Labour charges :
8.1.73 Skilled Electrician day 0.7 480.00 336.00
8.1.74 Semi skilled Electrician day 1.4 415.00 581.00
8.1.81 Helpers day 0.7 370.00 259.00
Sundries 1.00
C) Cost for 7 Points 3430.00
Rate per Point 490.00

MODULAR SOCKET ON COMMON BOARD


6 S&F of 6A 2 in one socket 6A switch Modular type
Switch control MS flush boxes with MS modular switch
box, cover plate fixing on coomon board including all
labour charges etc., complete.
a) Material
1.9.1 6A Switch 1 way modular switch each 1 63 63
1.9.4 6A 3/2 pin socket modular each 1 93 93
1.9.18 3 Module cover frame each 1 69 69
1.3.2 3 Module box each 1 80 80

b) Labour charges :
8.1.73 Skilled Electrician day 0.067 480.00 32.16
8.1.81 Helpers day 0.067 370.00 24.79
Sundries
Rate per each 362.00

Modular Page No : 20
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
MODULAR SOCKET ON SEPARATE BOARD
7 Wiring with 2 of 22/0.3mm (1.5 Sq.mm) P.V.C. insulated
F.R. flexible copper cable (ISI MARK) in existing pipe
with 6A switch and 6A 2 in one socket Modular type
Switch control and MS boxes with MS modular switch
box, cover plate fixing on separate board including all
labour charges etc., complete.

Taking Output = 15 Points


a) Material
1.5.2 22/0.3mm FR PVC copper wire 100 M 1
1358 1358
1.9.1 6A Switch 1 way modular switch each 15 63 945
1.9.4 6A 3/2 pin socket modular each 15 93 1395
1.9.18 3 Module cover frame each 15 69 1035
1.3.2 3 Module box each 15 80 1200

b) Labour charges :
8.1.73 Skilled Electrician day 1.5 480.00 720
8.1.74 Semi skilled Electrician day 1.5 415.00 622.5
8.1.81 Helpers day 1.5 370.00 555
Sundries
C) Cost for 15 Points 7830.5
Rate per Points 522.00

SEPARATE SOCKET
( 3nos switchs and 3nos sockets) For Computer Use

8 Wiring with 2 of 14/0.3mm (1.5 Sq.mm) P.V.C. insulated


F.R. flexible copper cable (ISI MARK) in existing pipe
with 6A Modular switch control- 3nos and 3/2 pin Modular
sockets - 3 nos fixing on separate board MS modular
switch box including all labour charges etc., complete.

Taking Output = 15 Points


a) Material
1.5.2 22/0.3mm FR PVC copper wire 100 M 1
1358 1358
1.9.1 6A Switch 1 way modular switch each 45 63 2835
1.9.4 6A 3/2 socket modular each 45 93 4185
1.9.22 9 Module cover frame each 15 167 2505
1.3.5 9 Module box each 15 170 2550

b) Labour charges :
8.1.73 Skilled Electrician day 1.5 480.00 720
8.1.74 Semi skilled Electrician day 1.5 415.00 622.5
8.1.81 Helpers day 1.5 370.00 555
Sundries
C) Cost for 15 Points 15330.5
Rate per Points 1022.00

Modular Page No : 21
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
MODULAR SOCKET ON 16A SOCKET
9 S&F of 16A/6A, 2 in one socket 16A switch Modular
type Switch control MS flush boxes with MS modular
switch box, front cover plate including all labour charges
etc., complete.
a) Material
1.9.7 16A Switch 1 way modular switch each 2 83 166
1.9.12 16A 2 in one socket modular each 2 135 270
1.9.18 3 Module cover frame each 2 77 154
1.3.2 3 Module box each 2 80 160

b) Labour charges :
8.1.73 Skilled Electrician day 0.134 480.00 64.32
8.1.74 Helpers day 0.134 415.00 55.61
Sundries 0.07
Total For 2 Sockets 870.00
Rate per each 435.00

RUN OF MAINS
Makes of wires:- Finolex/ RR Kabel/ Havells/ Polycab
/ HPL / RPG / GM / Million / Gold Medal / Power
Flex.

10 3.1.3 Supply and run of 1 of 22/0.3mm (1.5 Sq.mm) F.R P.V.C.


insulated flexible copper cable in existing pipe for mains
inlcuding all labour charges etc., complete.
Taking Output = 100 M
a) Material
1.5.2 22/0.3mm FR PVC copper wire 100 M 1
1358 1358
b) Labour charges :
8.1.73 Skilled Electrician day 0.335 480.00 160.8
8.1.74 Semi Skilled Electrician day 1 415.00 415
8.1.81 Helpers day 0.335 370.00 123.95
Sundries 2.25
C) Cost for 100 RM 2060
Rate per Metre = C/100 21.00
Note : Labour Charges considered for 150 M / day

Modular Page No : 22
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
10 3.1.4a Supply and run of 3 of 36/0.3mm (2.5 Sq.mm) F.R.L.S
P.V.C. insulated flexible copper cable in existing pipe for
mains inlcuding all labour charges etc., complete.

Taking Output = 100 M


a) Material
1.5.3 36/0.3mm FR PVC copper wire 100 M 3
2195 6585
b) Labour charges :
8.1.73 Skilled Electrician day 1.02 480.00 489.6
8.1.74 Semi Skilled Electrician day 3 415.00 1245
8.1.81 Helpers day 1.02 370.00 377.4
Sundries 3
C) Cost for 100 RM 8700
Rate per Metre = C/100 87.00
Note : Labour Charges considered for 150 M / day

11 3.1.5 Supply and run of 3 of 56/0.3mm (4 Sq.mm) F.R.L.S


P.V.C. insulated flexible copper in existing pipe for mains
inlcuding all labour charges etc., complete.

Taking Output = 100 M


a) Material
1.5.4 56/0.3mm FR PVC copper wire 100 M 3
3360 10080
b) Labour charges :
8.1.73 Skilled Electrician day 1.02 480.00 489.6
8.1.74 Semi Skilled Electrician day 3 415.00 1245
8.1.81 Helpers day 1.02 370.00 377.4
Sundries 8
C) Cost for 100 RM 12200
Rate per Metre = C/100 122.00
Note : Labour Charges considered for 150 M / day

12 3.1.6 Supply and run of 3 of 84/0.3mm (6 Sq.mm) F.R.L.S


P.V.C. insulated flexible copper cable in existing pipe for
mains inlcuding all labour charges etc., complete.

Taking Output = 100 M


a) Material
1.5.5 84/0.3mm FR PVC copper wire 100 M 3
5250 15750
b) Labour charges :
8.1.73 Skilled Electrician day 1.02 480.00 489.6
8.1.74 Semi Skilled Electrician day 3 415.00 1245
8.1.81 Helpers day 1.02 370.00 377.4
Sundries 8
C) Cost for 100 RM 17870
Rate per Metre = C/100 179.00
Note : Labour Charges considered for 150 M / day

Modular Page No : 23
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
13 3.1.6 Supply and run of 5 of 84/0.3mm (6 Sq.mm) F.R.L.S
P.V.C. insulated flexible copper cable in existing pipe for
mains inlcuding all labour charges etc., complete.

Taking Output = 100 M


a) Material
1.5.5 84/0.3mm FR PVC copper wire 100 M 5
5250 26250
b) Labour charges :
8.1.73 Skilled Electrician day 1.7 480.00 816
8.1.74 Semi Skilled Electrician day 5 415.00 2075
8.1.81 Helpers day 1.7 370.00 629
Sundries
C) Cost for 100 RM 29770
Rate per Metre = C/100 298.00
Note : Labour Charges considered for 150 M / day

14 3.1.7 Supply and run of 5 of 140/0.3mm (10 Sq.mm) F.R.L.S


P.V.C. insulated flexible copper cable in existing pipe for
mains inlcuding all labour charges etc., complete.

Taking Output = 100 M


a) Material
1.5.6 140/0.3mm FR PVC copper wire 100 M 5
7980 39900
b) Labour charges :
8.1.73 Skilled Electrician day 2.5 480.00 1200
8.1.74 Semi Skilled Electrician day 7.5 415.00 3112.5
8.1.81 Helpers day 2.5 370.00 925
Sundries 2.5
C) Cost for 100 RM 45140
Rate per Metre = C/100 451.00
Note : Labour Charges considered for 150 M / day

DISTRIBUTION BOARDS
Makes : Legrand / Schneider
15 4.4.9 Supply and fixing DP Metal enclosure with IP20
Protection with 1 No. 20A,10KA 'c' curve DPMCB (Motor
characteristics MCBs) control including making
connections etc., complete concealing in wall.
Makes : Legrand / Schneider.

a) Material
2.12.18 Supply of DP Metal Enclosure with IP 20 Protection. Nos 1 366.00 366
2.9.3 supply of 10KA 20A DP MCB Nos 1 595.00 595
b) Labour charges :
8.1.73 Skilled Electrician day 0.25 480.00 120
8.1.74 Semi Skilled Electrician day 0.25 415.00 103.75
8.1.81 Helpers day 0.25 370.00 92.5
8.1.76 a Semi skilled mason day 0.25 370.00 92.5
8.1.49 b bag cement kg 2 6.60 13.2
Sundries such as TW Plugs, Screws ,sand etc, LS 7.00
Rate per each 1390.00

Modular Page No : 24
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
a 1No. Semi skilled mason
b 1/4 bag cement

Modular Page No : 25
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit

16 4.4.4 4way TPN, D.B with IP-43,


40A FP Isolator - 1 No for incomer,
10kA-6-32A SP MCBs - 12Nos for outgoing.
a) Material
2.12.8 4way TPN, D.B with IP-43 Protection suitable for 3 each 1 2491.00 2491
phase ELCB /FP Isolator as incommer.
2.10.6 Supply of 40A FP Isolator . each 1 814.00 814
2.9.1 10 kA - 6-32A range SP MCBs each 12 201.00 2412
b) Labour charges :
8.1.73 Skilled Electrician day 0.5 480.00 240
8.1.74 Semi Skilled Electrician day 1 415.00 415
8.1.76 a Semi skilled mason day 1 370.00 370
8.1.49 b bag cement day 12.5 6.6 82.5
Sundries such as TW Plugs, Screws Cement etc, LS 1 0.5
Rate per each 6825.00
Note : Labour Charges considered for 2 jobs / day

17 4.4.4 4way TPN, D.B with IP-43,


63A FP Isolator - 1 No for incomer,
10kA-6-32A SP MCBs - 12Nos for outgoing.
a) Material
2.12.8 4way TPN, D.B with IP-43 Protection suitable for 3 each 1 2491.00 2491
phase ELCB /FP Isolator as incommer.
2.10.7 Supply of 63A FP Isolator . each 1 890.00 890
2.9.1 10 kA - 6-32A range SP MCBs each 12 201.00 2412
b) Labour charges :
8.1.73 Skilled Electrician day 0.5 480.00 240
8.1.74 Semi Skilled Electrician day 1 415.00 415
8.1.76 a Semi skilled mason day 1 370.00 370
8.1.49 b bag cement day 12.5 6.6 82.5
Sundries such as TW Plugs, Screws Cement etc, LS 1 0.5
Rate per each 6901.00
Note : Labour Charges considered for 2 jobs / day
Note : Labour Charges considered for 2 jobs / day

18 4.4.2 SPN 8 way D.B with IP-43,


40A DP MCB - 1 No for incomer,
10kA-6-32A SP MCBs - 6 Nos for outgoing.
Taking Output = each
a) Material
2.12.6 SPN 8 way D.B with IP-43 Protection (Metal Door ) each 1
suitable for single phase ECCB / RCCB/ DP Isolator. 1245.00 1245
2.10.2 40A D.P. Isolator each 1 367.00 367
2.9.1 10 kA - 6-32A range SP MCBs each 6 201.00 1206
b) Labour charges :
8.1.73 Skilled Electrician day 0.5 480.00 240
8.1.74 Semi Skilled Electrician day 0.5 415.00 207.5
8.1.76 a Semi skilled mason day 0.5 370.00 185
8.1.49 b bag cement day 12.5 6.6 82.5
Sundries such as hardware, cement etc, LS 1 2
Rate per each 3535.00

Modular Page No : 26
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
19 4.4.6 4 way Vertical Type DB:-
a) Material
2.12.10 Supply of 4 Way VTPN DB suitable for accomodating Nos 1 7843.00 7843.00
125A / 160A 4 Pole MCCB as incomer and 4 Nos TP
MCBs as outgoing and with IP 43 Protection.
2.8.3 125 Amps, TPN , 25 kA MCCB Nos 1 7194.00 7194.00
2.9.6 10 kA, 40/63A TP MCBs: Nos 4 1477.00 5908.00

b) Labour charges :
8.1.73 Skilled Electrician day 0.5 480.00 240.00
8.1.74 Semi Skilled Electrician day 1 415.00 415.00
Sundries such as hardware, cement etc, LS 1
Rate per each 21600.00

20 A 8 way Vertical Type DB:-


a) Material
2.12.4 8 Way TPN Vertical DB with IP -42 (Metal door) Nos 1
protection suitable for 125A, 3 Pole, 25kA MCCB as
incomer. 9823.00 9823.00
2.8.3 125 Amps, TPN , 25 kA MCCB Nos 1 7194.00 7194.00
2.9.6 10 kA, 63A TP MCBs: Nos 6 1477.00 8862.00
2.9.1 10kA, 6 to 32A SP MCBs. Nos 6 201.00 1206.00
b) Labour charges :
8.1.73 Skilled Electrician day 1 480.00 480.00
8.1.74 Semi Skilled Electrician day 1 415.00 415.00
Sundries such as hardware, cement etc, LS 1
Rate per each 27980.00

21 b 8 way Vertical Type DB:-


a) Material
2.12.4 8 Way TPN Vertical DB with IP -42 (Metal door) Nos 1
protection suitable for 160A, 3 Pole, 25kA MCCB as
incomer. 9823.00 9823.00
PL - L&T Supply of 160A 3Pole MCCB, Adjustable, Confirms to Nos 1
- IS/IEC 60947-2 having Breaking Capacity 36/35 KA with
DU250C thermal magnetic release Panel Mounted. ( cat no
CM90631OONO) 6670.00 6670.00
2.9.6 10 kA, 63A TP MCBs: Nos 8 1477.00 11816.00
b) Labour charges :
8.1.73 Skilled Electrician day 1 480.00 480.00
8.1.74 Semi Skilled Electrician day 1 415.00 415.00
Sundries such as hardware, cement etc, LS 1
Rate per each 29204.00

22 A Supply and Installation of 63 Amps 4P MCCB with cable


end boxes on suitable angle iron frame work for the
areas mentioned in the drawings including all Labours
charges massonry work etc complete with connections.
Make: L&T/Siemens/Schneider.
a) Material
2.8.2 63 Amps 4P MCCB, 25 KA Nos 1 6813.00 6813.00
6.2.2 +
6.2.3/2 Fabrication ( 0.2+0.24+0.15+10%) sqmtr 0.65
3488.00 2267.20
Provision for angle iron frame work etc., LS 1 150.00 150.00

Modular Page No : 27
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
b) Labour charges :
8.1.73 Skilled Electrician day 0.5 480.00 240.00
8.1.74 Semi Skilled Electrician day 0.5 415.00 207.50
Sundries such as T.W. Plugs, Screws, Cement etc., LS 1 0.00
Rate per each 9677.70

Earthing
23 5.1.2 Providing independent earthing for Important equipment
with 40mm dia 'B' class 2.5m long G.I pipe and 19mm
dia 'B' class G.I pipe of 0.3mtr. long connected with
reducer providing G.I funnel with mesh enclosed in
C.C.Chamber of 400m x 400m x 400mm with R.C.C.
Slab cover duly providing staggered holes filling with salt
and charcoal from the bottom of the pipe giving earth
connection from electrode through G.I strip of 40 x 6mm
x 200mm length with all accessories and labour charges
complete, as per IS specifications 732/1982 (Part II)

a) Material
8.1.57 40mm dia G.I pipe Class 'B' (Civil SSR) Mtr 2.5 381.00 952.50
8.1.40 25mm x 6 mm G.I.Strip kg 0.25 68.00 17.00
8.1.40 No.8 G.I.Wire kg 0.83 68.00 56.44
8.1.58 Drilling of staggered holes of 12mm dia to G.I pipe. Each 16 6.00 96.00
8.1.59 G.I Bolts, Nuts and Washers. Set 4 11.00 44.00
8.1.60 18" dia 2" thick hume pipe ring Each 1 275.00 275.00
8.1.62 2" thick CC cover for hume pipe ring with handle Each 1 121.00 121.00
8.1.09 Coke. kg 40 15.00 600.00
8.1.10 Salt. kg 20 10.00 200.00
8.1.51 Earth work excavation of hard gravel soil with small cum 1.27
boulders for trench 1st step of size 1.2 x 0.6 x 0.9 m
(4'x2'x3') 220.00 279.40
8.1.51 Earth work hard disintegrated rock and boulders for cum 1.87
trench 2nd Step of size 0.9 x 0.6 x 1.2 m (Civil SSR)
(3'x2'x4') 220.00 411.40
25% extra for trenches and narrow Pit, back filling and 25%
blending. 690.80 172.70
b) labour charges for fixing pipe
8.1.74 Semi Skilled Electrician Nos 1 480.00 480.00
Sundries such as Lugs and Saddles
Rate per each 3705.00

24 5.1.3 Providing independent earthing for Sophisticated


Electronic equipment with 600mm x 600mm x 3.15mm
thick copper plate rigidly fixed to 40mm dia G.I Pipe of
2.5mtr. length filling with salt and charcoal giving earth
connection from electrode G.I strip of 40 mm x 6mm x
200mm length and hume pipe with all accessories and
labour charges complete as per IS specification
732/1982 (Part II).

a) Material
8.1.57 40mm dia G.I pipe Class 'B' (Civil SSR) Mtr 2.5 381.00 952.50
8.1.35 600mm x600mm x 3.15mm thick copper plate kg 10.00 605.00 6050.00
8.1.35 25mm x 3mm x 6Mtrs length copper strip kg 3.98 605.00 2407.90
8.1.35 25mm x 5mm x 200 length copper strip kg 0.22 605.00 133.10

Modular Page No : 28
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
8.1.51 Earth work excavation of hard gravel soil with small cum 1.27
boulders for trench 1st step of size 1.5 x 0.9 x 0.9 m
(5'x3'x3') 220.00 279.40
8.1.51 Earth work hard disintegrated rock and boulders for cum 1.87
trench 2nd Step of size 1.2 x 0.9 x 1.65 m (Civil SSR-16)
(4'x3'x5.5') 220.00 411.40
25% extra for trenches and narrow Pit, back filling and 25%
blending. 690.80 172.70
8.1.60 18" dia 18" height 2" thick hume pipe ring Each 1 275.00 275.00
8.1.62 2" thick CC cover for hume pipe ring with handle Each 1 121.00 121.00
8.1.9 Coke. kg 40 15.00 600.00
8.1.10 Salt. kg 20 10.00 200.00
8.1.59 G.I Bolts, Nuts and Washers. Set 4 11.00 44.00
8.1.58 Drilling of staggered holes of 12mm dia to G.I pipe. Each 16 6.00 96.00
b) labour charges for fixing pipe
8.1.73 Skilled Electrician Nos 1 480.00 480.00
Sundries such as Lugs and Saddles 17.00
Rate per each 12240.00

25 5.2.5 Supply and Run of 25mm x 6mm G.I Strip including cost
of all accessories and labour charges etc., complete.

a) Material
8.1.40 25mm x 6mm G.I Strip 100 M Length (1.18 Kg / Mtr) kg 118 68.00 8024.00
b) labour charges
8.1.73 Skilled Electrician Nos 2 480.00 960.00
8.1.81 Helper Nos 2 370.00 740.00
Sundries such as T&P. 6.00
C) Cost for 100 M 9730.00
Rate per mtr c/100 97.00

26 5.2.6 Supply and Run of 50mm x 6mm G.I Strip including cost
of all accessories and labour charges etc., complete

a) Material
8.1.40 50mm x 6mm G.I Strip 100 M Length ( 2.36 Kg / Mtr) kg 236 68.00 16048.00
b) labour charges
8.1.73 Skilled Electrician Nos 2 480.00 960.00
8.1.81 Helper Nos 2 370.00 740.00
Sundries such as T&P. 2.00
C) Cost for 100 M 17750.00
Rate per mtr c/100 178.00

27 5.3.4 Supply and Run of 25mm x 3mm copper strip including


cost of all accessories and labour charges etc.,
complete.
a) Material
8.1.36 25mmx 3mm Copper strip (0.663 Kg / Mtr) 100 M Length kg 66.3
605.00 40111.50
b) labour charges
8.1.73 Skilled Electrician Nos 2 480.00 960.00
8.1.81 Helper Nos 2 370.00 740.00
Sundries such as T&P. 6.00
C) Cost for 100 M 41817.50

Modular Page No : 29
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
Rate per mtr c/100 418.00

28 5.2.1 Supply and Run of No.8 SWG G.I wire including cost of
all accessories and labour charges etc., complete.
a) Material
8.1.40 No.8 SWG G.I wire 100 M Length (0.104 Kg / Mtr) Kg 10.4 68.00 707.20
8.1.7 U' Nails 100N 1.5
os 44.00 66.00
b) labour charges
8.1.81 Helpers day 2 370.00 740.00
Sundries. 6.80
C) Cost for 100 M 1520.00
Rate per mtr c/100 15.00

FIXTURES

29 Supply, Transportaton, and fixing of 16W/18W, 1200mm


length, 1665 lumins, LED retrofit tube light, input voltage
AC 240 Volts with ≥0.95 PF with driver and frosted cover
etc complete with 5 years warranty Makes: Syska /
Philips / GE / Crompton / Bajaj.
a) Material
MP Cost of fitting with tube each 1 900.00 900
1.6.8 23/0060 twin core wire Mtr 1 10.40 10.4
b) Labour charges :
8.1.73 Skilled Electrician day 0.1 480.00 48
8.1.81 Helpers day 0.1 370.00 37
sundries 1.6
Rate per each 997

30 Supply, Transportaton, and fixing of 2 x 36W industrial


box type tube light luminaire powder coated CRCA sheet
steel housing with reflector and electronic ballast with 2 x
36Watt tubes and including all labour charges and
conveyance of all materials etc complete with with
flexible wire and connections.
Makes: Bajaj / Crompton / Havells .

a) Material
3.6.20 Cost of fitting with tube each 1 1615.00 1615
3.7.7 Cost of 36/40W tube 2 45 90.00
1.6.8 23/0060 twin core wire Mtr 1 10.40 10.4
b) Labour charges :
8.1.73 Skilled Electrician day 0.1 480.00 48
8.1.81 Helpers day 0.1 370.00 37
sundries 1.6
Rate per each 1802

31 Supply and Fixing of batten holder/angle holder on


existing block with 3-5W bulb and all labour charges
etc., complete. In lieu of ceiling rose.Make: GoldMedal
Olive/ Million Zoom

a) Material
1.7.14 BH/SBH each 1 20.00 20
3.7.1 40W bulb each 1 12.00 12

Modular Page No : 30
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
1.7.13 less cost of ceiling rose each 1 21.00 21
b) Labour charges :
8.1.73 Skilled Electrician day 0.05 480.00 24
8.1.81 Helpers day 0.05 370.00 18.5
Rate per each 53.5
Less cost of labour for fixing of ceiling rose 42.5
Rate per each 11.00
Note BH should be allowed in place of ceiling rose without
extra cost.

32 5.1.1 Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan Each 1 2020.00 2020.00
without Regulator. Makes : Crompton High Speed
Decora / Bajaj Regalstar / Havells Fusion 50 / Orient
Summer Crown /Usha technix decorative

33 1.9.14 Supply and fixing of 400w Modular type Electronic Each 1 473.00 473.00
fan regulator hum free step type socket size in the
existing switch board.

34 9.7.25 Supply and erecting 19/20mm steel tube down rod of


one meter length with bolts & nuts duly painted with
matching colour of fan complete
a) Material
8.1.20 19/20mm steel tube down rod with bolts & nuts for fan M 0.9 80.00 72.00
with maching colour.
b) Labour charges for Fixing
8.1.81 Helper day 0.1 370.00 37.00
109.00
Less cost of fan down rod supplied with new fan of about M 0.23 80.00 18.40
9" in length equal to 0.23 Metre at above rate
sundries like painting, Drilling of holes etc LS 9.40
Rate per Each 100.00

35 9.7.35 Labour charges for fixing of ceiling fan with regulator


including transportation, 3 core wire leads etc complete

a) Material
1.6.8 23/0060 twin core wire M 1 10.40 10.40
b) Labour charges.
Fixing of ceiling fan
8.1.74 Semi skilled Electrician day 0.125 415.00 51.88
8.1.81 Helper day 0.125 370.00 46.25
sundries LS 0.47
Rate per Each 109.00
Note : Labour is Considered for8 jobs / day

36 5.1.10 Supply,Transportation of light duty exhaust fan 12"(300 Each 1 1350.00 1350.00
mm) size 900 rpm with metal blades wiremesh with all
accessories etc complete.
Make:Orient/CromptonGreeves/GE/Almonard/ Bajaj
Fresh.

Modular Page No : 31
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
37 5.1.12 Supply,Transportation of Heavy duty exhaust fan Each 1 2645.00 2645.00
12"(300 mm) size 900 rpm with metal blades wiremesh
with all accessories etc complete

38 9.7.36 Labour charges for fixing of Exhaust fan in wall with


necessary connections and masonary work of making
hole, finishing etc., complete
a) Material
1.6.8 23/0060 Twin flat wire M 1 10.40 10.40
8.1.50 Cement kg 25 6.60 165.00
b) Labour charges.
8.1.73 Skilled Electrician day 0.25 480.00 120.00
8.1.74 Helper day 0.25 415.00 103.75
8.1.81 Mason day 0.25 370.00 92.50
Sundries such as Sand, Bolt, Nuts etc., LS 1 0.35
Rate per Each 492.00

39 Supply and fixing of louver shutter suitable for 12"


Exhaust fan including all labour charges etc complete
with connections and colouring matching to the wall with
enamel paint.
MR Material E 1 210.00 210.00
b) Labour charges.
8.1.81 Helper day 0.1 370.00 37.00
Sundries 5

Total 252.00

40 Supply and fixing of 1x40W weatherproof flourescent


streetlight fitting comprising canopy of sheet Aluminium
in stove enamel finish with copper / VPIT ballast,
capacitor, tube and starter etc to the wall with 1.0 Mtr.,
25mm dia GI pipe bracket and anti tilting MS flat etc.,
including giving connections and labour charges etc.,
complete.
Make: Bajaj, crompton, surya

7.1.1 Supply of 1x40W weatherproof flourescent streetlight fitting


comprising canopy of sheet Aluminium in stove enamel finish
with copper / VPIT ballast, capacitor, tube and starter etc.,
complete.

a) Material
3.1.1 1x40W WP flourscent street light fitting. (BAJAJ) each 1 1260.00 1260
3.7.4 Lamp cost of 40W each 1 45.00 45
Sundries and rounding off each 1 20.00 3.2
7.9.5 Fixing of 40W street light luminaire to the wall with 1.0 Mtr.,
25mm dia GI pipe bracket and anti tilting MS flat etc., including
giving connections and labour charges etc., complete.

a) Material
8.1.55 25mm dia G.I pipe M 1 242 242
1.6.8 23/0060 twin core flexible copper cable M 2 10.4 20.8
Pipe bending charges LS 1 15 15
M.S flat and welding charges LS 1 50 50

Modular Page No : 32
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
b) Labour charges
8.1.73 Skilled Electrician/carpenter day 0.2 480.00 96
8.1.81 Mason day 0.2 370.00 74
8.1.81 Semi skilled Electrician / Helper day 0.2 370.00 74
Rate per each 1880.00

TELEPHONE
41 3.1.2 Supply and laying of 2 pair telephone wire 0.5mm copper
in the existing metallic/non metallic conduit pipe with
connections etc.,completeTelephone wire Makes:
Finolex/polycab/Gold Medal/Million/RPG/
Surabhi/Delton.
Taking Output = 100 M
a) Material
7.1.1 2 pair telephone wire 0.5mm 100 M 1
1010.00 1010
b) Labour charges :
8.1.73 Skilled Electrician day 0.34 480.00 163.2
8.1.74 Semi Skilled Electrician day 1 415.00 415
8.1.81 Helpers day 0.34 370.00 125.8
Sundries LS 1 6
C) Cost for 100 RM 1720
Rate per Metre 17.00

42 3.1.2 Supply and laying of 10 pair telephone wire 0.5mm


copper in the existing metallic/non metallic conduit pipe
with connections etc.,completeTelephone wire
Makes: Finolex/polycab/Gold Medal/Million/RPG/
Surabhi/Delton.
Taking Output = 100 M
a) Material
7.1.15 10 pair telephone wire 0.5mm 100 M 1
4000.00 4000
b) Labour charges :
8.1.73 Skilled Electrician day 0.34 480.00 163.2
8.1.74 Semi Skilled Electrician day 1 415.00 415
8.1.81 Helpers day 0.34 370.00 125.8
Sundries LS 1 6
C) Cost for 100 RM 4710
Rate per Metre 47.00

43 2.1.5 Supply and fixing of 2 Line telephone jack type socket


moduallr type with front and back plate in MS box with
screws connections etc.,
Make:GM Four-Five/ Legrand Arteor/ Schneider Zen
celo/ MK Blenge / Cabtree Thames Platinum / Million
Logus / Gold Medal Curve.

a) Material
1.9.15 2 Line telephone jack type socket modular each 1 65.00 65
19.17 1/2 module plate cover frame each 1 56.00 56
b) Labour charges :
8.1.73 Skilled Electrician day 0.067 480.00 32.16
8.1.81 Helpers day 0.067 370.00 24.79

Modular Page No : 33
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
Sundries LS 1 2.05
Rate per each 180.00

44 Supply and Installation of 10 Pair MDF box withback


mount frame, krone connector, powder coated metal
body with loack and key arrangement.
Make: Krone
7.1.18 10 pair MDF krone pair box each 1 650.00 650

b) Labour charges :
8.1.73 Skilled Electrician day 0.3 480.00 144
8.1.81 Helpers day 0.3 370.00 111
Sundries LS 1 0
Rate per each 905.00

LAN
45 2.1.5 Supply and termination of cat-6 RJ 45 out lets including
dual face plate of Makes:D Link / AMP / Molex /
Legrand / Krone.
a) Material
7.1.34 cat-6 RJ 45 out lets each 1 250.00 250
b) Labour charges :
8.1.73 Skilled Electrician day 0.067 480.00 32.16
8.1.81 Helpers day 0.067 370.00 24.79
Sundries 3.05
Rate per each 310.00

46 2.1.5 Supply and laying of Cat 6 UTP cable including all taxes
etc complete.(D-Link/AMP/Krone/Finolex)
Taking Output = 100 M
a) Material
7.1.3 LAN cat -6 100 M 1
2300 2300
b) Labour charges :
8.1.73 Skilled Electrician day 0.5 480.00 240
8.1.74 Semi Skilled Electrician day 0.5 415.00 186.75
8.1.81 Helpers day 1 370.00 370
Sundries LS 1 3.25
C) Cost for 100 RM 3100
Rate per Metre 31.00

47 Supply of 7feet Mounting card including all taxes etc


complete.
(D-Link/AMP/Krone/Beldan)
a) Material
7.1.10 7feet Mounting card each 1 220.00 220

Rate per each 220

48 Supply of 3feet Mounting card including all taxes etc


complete.
(D-Link/AMP/Krone/Beldan)
a) Material
7.1.11 3 feet Mounting card each 1 200.00 200

Modular Page No : 34
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit

Rate per each 200

49 Supply and Fixing of 24 port patch panels etc.,


complete.
(D-Link/AMP/Krone/Beldan)
a) Material
7.1.12 24 port patch panels each 1 6500 6500
b) Labour charges :
8.1.73 Skilled Electrician day 0.3 480.00 144
8.1.81 Helpers day 0.3 370.00 111
Sundries LS 1 0
Rate per each 6755.00

50 Supply and fixing of 6 U Floor mounting net work Rack


with power spike including all accessories etc.,
complete.
(HCL Vall / D-Link /AMP / Krone)
a) Material
7.1.22 6 U Floor mounting net work Rack with power spike each 1 4700 4700
b) Labour charges :
8.1.73 Skilled Electrician day 0.3 480.00 144
8.1.81 Helpers day 0.3 370.00 111
Sundries LS 1 0
Rate per each 4955.00

51 Supply and Fixing 24 port 10/1000 MBPS switch etc.,


complete.
(CISCO/Net Gear/D-Link/HP)
a) Material
7.1.7 24 port 10/1000 MBPS switc each 1 6700 6700
b) Labour charges :

8.1.73 Skilled Electrician day 0.3 480.00 144


8.1.81 Helpers day 0.3 370.00 111
Sundries LS 1 0
Rate per each 6955.00

52 Certificate, Testing and documentation etc complete..

a) Material
MR I/Os devices each 1 125.00 125

Rate per each 125

53 Supply,Transportation of following XLPE insulated


1100V grade armoured alluminium cable as per
specification confirming to IS:7098(part-1)
Make:- Torrent/Universal/POLY CAB/ Havells/ Unicab.

4.1.4 4 Core 6Sq.mm. Rmtr 1 130.00 130.00


4.1.5 4 Core 10Sq.mm. Rmtr 1 147.00 147.00

Modular Page No : 35
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
4.1.6 4 Core 16Sq.mm. Rmtr 1 162.00 162.00
4.1.7 3.5 Core 25Sq.mm. Rmtr 1 207.00 207.00
4.1.8 3.5 Core 35Sq.mm. Rmtr 1 247.00 247.00
4.1.9 3.5 Core 50Sq.mm. Rmtr 1 326.00 326.00
4.1.10 3.5 Core 70Sq.mm. Rmtr 1 421.00 421.00
4.1.11 3.5 Core 95Sq.mm. Rmtr 1 547.00 547.00
4.1.12 3.5 Core 120Sq.mm. Rmtr 1 669.00 669.00
4.1.13 3.5 Core 150Sq.mm. Rmtr 1 762.00 762.00
4.1.14 3.5 Core 185Sq.mm. Rmtr 1 934.00 934.00
4.1.15 3.5 Core 240Sq.mm. Rmtr 1 1185.00 1185.00
4.1.16 3.5 Core 300Sq.mm. Rmtr 1 1449.00 1449.00

54 15.6.1 Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 70 Sq,mm on sand cush

a) Material
8.1.51 Excavation of earth 100 x 0.3 X 0.9 m cum 27 220.00 5940.00
8.1.53 Cost of bricks 1000 0.92
Nos 3819.00 3513.48
8.1.52 Cost of sand cum 6 594.00 3564.00
8.1.49 Cement Kg 25 6.60 165.00
8.1.23 Cost of cable route indicator each 12 90.00 1080.00
b) Labour charges for laying cable.
8.1.84 Man Mazdoor for spreading the sand and back filling the each 2.5
excavated soil. 310.00 775.00
8.1.73 Skilled Electrician day 1 480.00 480.00
8.1.81 Helper day 2 370.00 740.00
8.1.84 Man Mazdoor for concreting and embedding of cable way indicators
day 2
310.00 620.00
Sundires and Rounding off LS 1 0.00
Rate per 100mts 16877.48
Rate per Each Mtr 169.00

55 15.6.1 Earth work excavation of Trench in hard ground soil, laying of U.G cables 95 to 300Sqmm on sand cus

a) Material
8.1.51 Excavation of earth 100 x 0.3 X 0.9 m cum 27 220.00 5940.00
8.1.53 Cost of bricks 1000 0.92
Nos 3819.00 3513.48
8.1.52 Cost of sand cum 6 594.00 3564.00
8.1.49 Cement Kg 25 6.60 165.00
8.1.23 Cost of cable route indicator each 12 90.00 1080.00
Sub - Total 14262.48
Rate per Mtr 142.62
b) Labour charges for laying cable.
8.1.84 Man Mazdoor for spreading the sand and back filling the each 2.5
excavated soil. 310.00 775.00

Modular Page No : 36
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
8.1.73 Skilled Electrician day 1 480.00 480.00
8.1.81 Helper day 2 370.00 740.00
8.1.84 Man Mazdoor for concreting and embedding of cable way indicators
day 2
310.00 620.00
Sundires and Rounding off LS 1 0.00
2615.00
Labour Rate per 60mts 43.58
Rate per Each Mtr 186.00

55 15.6.3 Labour charges for run of U.G cable up to 70 sq.mm on


wall / existing pipe with necessary fixing arrangments
such as saddles, clamps,wooden separators etc., (as
directed by departmental official) for eath connections for
the cables.
a) Material
8.1.1 Wooden separators each 200 1.65 330.00
8.1.64 to saddles of required size 100 2
8.1.71 = nos
Avg
390.00 780.00
1.4.20 12mm screws 100 4
nos 59.00 236.00
b) Labour charges
8.1.73 Skilled Electrician day 1 480.00 480.00
8.1.81 Helper day 4 370.00 1480.00
Sundires such as Cement, Sand etc., 19.00
Rate per Each 3325.00
Note : Labour Charges Considered for 100 Mts / day 33.00

Cable Terminations
56 Supply and Fixing of single compression brass cable glands for
4 core, 10 Sq.mmarmoured cable with brass washers, lugs
etc., complete.
15.3.2 Supply and Fixing of heavy duty flange type brass cable glands
for 2 to 4 core, 10 Sq.mm PVC armoured cable with brass
washers complete.
a) Material
4.2.5 Brass cable gland for 2-4 core, 10 Sqmm armoured cable each 1 94.00 94.00
b) Labour charges for fixing glands.
8.1.74 Semi skilled Electrician day 0.066 415.00 27.39
Rate per Each 121.39

15.4.14 Supply and fixing of crimping type Aluminium lugs confirming to


I.S specifications for cables upto 16 Sq.mm including nuts and
bolts with connections.
a) Material
4.3.13 Aluminium Lugs up to 16 sqmm each 1 12 12.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.01 415.00 4.15
8.1.81 Helper day 0.01 370.00 3.70
Rate per Each 19.85
For two Nums 39.70
Sundries such as bolts and nuts. 0.91
Total for Termination of 10Sqmm LT cable 162.00

Modular Page No : 37
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
57 Supply and Fixing of single compression brass cable glands for
4 core, 16 Sq.mmarmoured cable with brass washers, lugs
etc., complete.
15.3.3 Supply and Fixing of heavy duty flange type brass cable glands
for 4 core, 16 Sq.mm / 3.5 core 25Sq.mm PVC armoured cable
with brass washers complete.
a) Material
4.2.5 Brass cable gland suitabtle for 4core 16 Sq.mm / 3.5 core 25 each 1
Sq.mm armoured cable 94.00 94.00
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.066 480.00 31.68
Rate per Each 125.68

15.4.14 Supply and fixing of crimping type Aluminium lugs confirming to


I.S specifications for cables upto 16 Sq.mm including nuts and
bolts with connections.
a) Material
4.3.13 Aluminium Lugs up to 16 sqmm each 1 12 12.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.01 415.00 4.15
8.1.81 Helper day 0.01 370.00 3.70
Rate per Each 19.85
For Four Nums 79.40

Sundries such as bolts and nuts. 0.92


Total for Termination of 16Sqmm LT cable 206.00

58 Supply and Fixing of single compression brass cable glands for


3.5 core, 25 Sq.mmarmoured cable with brass washers, lugs
etc., complete.
15.3.3 Supply and Fixing of heavy duty flange type brass cable glands
for 3.5 core, 25 Sq.mm PVC armoured cable with brass
washers complete.
a) Material
4.2.6 Brass cable gland suitabtle for 3.5core 25 Sq.mm / 3 core 50 each 1
Sq.mm armoured cable 138.00 138.00
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.066 480.00 31.68
Rate per Each 169.68
Note : Labour is Considered for 15 jobs / day
15.4.15 Supply and fixing of crimping type Aluminium lugs confirming to
I.S specifications for cable of 25 Sq.mm including nuts and
bolts with connections.
a) Material
4.3.14 Aluminium Lugs up to 25 sqmm each 1 14 14.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.01 415.00 4.15
8.1.81 Helper day 0.01 370.00 3.70
Rate per Each 21.85
For Three Nums 65.55
15.4.14 Supply and fixing of crimping type Aluminium lugs confirming to
I.S specifications for cables upto 16 Sq.mm including nuts and
bolts with connections.
a) Material
4.3.13 Aluminium Lugs up to 16 sqmm each 1 12 12.00
b) Labour charges for crimping

Modular Page No : 38
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
8.1.74 Semi Skilled Electrician day 0.01 415.00 4.15
8.1.81 Helper day 0.01 370.00 3.70
Rate per Each 19.85

Sundries such as bolts and nuts. 0.92


Total for Termination of25Sqmm LT cable 256.00

59 Supply and Fixing of single compression brass cable glands for


3.5 core, 35 Sq.mmarmoured cable with brass washers, lugs
etc., complete.
15.3.4 Supply and Fixing of heavy duty flange type brass cable glands
for 3.5 core, 35 Sq.mm / 3.0 core 50Sq.mm PVC armoured
cable with brass washers complete.
a) Material
4.2.6 Brass cable gland suitabtle for 3.5core 35 Sq.mm / 3 core 50 each 1
Sq.mm armoured cable 138.00 138.00
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.066 480.00 31.68
Rate per Each 169.68
Note : Labour is Considered for 15 jobs / day
15.4.16 Supply and fixing of crimping type Aluminium lugs confirming to
I.S specifications for cable of 35 Sq.mm including nuts and
bolts with connections.
a) Material
4.3.15 Aluminium Lugs up to 35 sqmm each 1 17 17.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.013 415.00 5.40
8.1.81 Helper day 0.013 370.00 4.81
Rate per Each 27.21
For Three Nums 81.62
15.4.14 Supply and fixing of crimping type Aluminium lugs confirming to
I.S specifications for cables upto 16 Sq.mm including nuts and
bolts with connections.
a) Material
4.3.13 Aluminium Lugs up to 16 sqmm each 1 12 12.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.01 415.00 4.15
8.1.81 Helper day 0.01 370.00 3.70
Rate per Each 19.85

Sundries such as bolts and nuts. 0.85


Total for Termination of 35Sqmm LT cable 272.00

60 Supply and Fixing of single compression brass cable glands for


3.5 core, 50 Sq.mmarmoured cable with brass washers, lugs
etc., complete.
15.3.5 Supply and Fixing of heavy duty flange type brass cable glands
for 3.5 core 50Sq.mm PVC armoured cable with brass washers
complete.
a) Material
4.2.6 Brass cable gland suitabtle for 3.5core 50 Sq.mm armoured each 1
cable 138.00 138.00
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.066 480.00 31.68
Rate per Each 169.68
Note : Labour is Considered for 15 jobs / day

Modular Page No : 39
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
15.4.17 Supply and fixing of crimping type Aluminium lugs confirming to
I.S specifications for cable of 50 Sq.mm including nuts and
bolts with connections.
a) Material
4.3.16 Aluminium Lugs up to 50 sqmm each 1 20 20.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.013 415.00 5.40
8.1.81 Helper day 0.013 370.00 4.81
Rate per Each 30.21
For Three Nums 90.62
15.4.15 Supply and fixing of crimping type Aluminium lugs confirming to
I.S specifications for cables upto 25 Sq.mm including nuts and
bolts with connections.
a) Material
4.3.13 Aluminium Lugs up to 25 sqmm each 1 12 12.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.01 415.00 4.15
8.1.81 Helper day 0.01 370.00 3.70
Rate per Each 19.85

Sundries such as bolts and nuts. 1.85


Total for Termination of 50Sqmm LT cable 282.00

61 Supply and Fixing of single compression brass cable


glands for 3.5 core, 70 Sq.mmarmoured cable with
brass washers, lugs etc., complete.
15.3.6 Supply and Fixing of heavy duty flange type brass cable
glands for 3.5 core, 70 Sq.mm PVC armoured cable
with brass washers complete.
a) Material
4.2.7 Brass cable gland suitabtle for 3.5core 70 Sq.mm each 1
armoured cable 264.00 264.00
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.066 480.00 31.68
8.1.81 Helper day 0.066 370.00 24.42
Rate per Each 320.10
Note : Labour is Considered for 15 jobs / day
15.4.18 Supply and fixing of crimping type aluminium lugs
confirming to I.S specifications for cable of 70 Sq.mm
including nuts and bolts with connections.
a) Material
4.3.21 Aluminium Lugs up to 70 sqmm each 1 25 25.00
b) Labour charges for crimping
8.1.73 Semi Skilled Electrician day 0.016 480.00 7.68
8.1.81 Helper day 0.016 370.00 5.92
Rate per Each 38.60
For Three Nums 116
15.4.16 Supply and fixing of crimping type Aluminium lugs
confirming to I.S specifications for cable of 35 Sq.mm
including nuts and bolts with connections.
a) Material
4.3.15 Aluminium Lugs up to35 sqmm each 1 17 17.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.013 415.00 5.40
8.1.81 Helper day 0.013 370.00 4.81

Modular Page No : 40
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
Rate per Each 27.21

Sundries such as bolts and nuts. 1.89


Total for Termination of 70Sqmm LT cable 465.00

62 Supply and Fixing of single compression brass cable


glands for 3.5 core, 95 Sq.mmarmoured cable with
brass washers, lugs etc., complete.
15.3.7 Supply and Fixing of heavy duty flange type brass cable
glands for 3.5 core, 95 Sq.mm PVC armoured cable
with brass washers complete.
a) Material
4.2.7 Brass cable gland suitabtle for 3.5core 95 Sq.mm each 1
armoured cable 264.00 264.00
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.066 480.00 31.68
8.1.81 Helper day 0.066 370.00 24.42
Rate per Each 320.10
Note : Labour is Considered for 15 jobs / day
15.4.19 Supply and fixing of crimping type aluminium lugs
confirming to I.S specifications for cable of 95 Sq.mm
including nuts and bolts with connections.
a) Material
4.3.21 Aluminium Lugs up to 95 sqmm each 1 27 27.00
b) Labour charges for crimping
8.1.73 Semi Skilled Electrician day 0.016 480.00 7.68
8.1.81 Helper day 0.016 370.00 5.92
Rate per Each 40.60
For Three Nums 122
15.4.17 Supply and fixing of crimping type Aluminium lugs
confirming to I.S specifications for cable of 50 Sq.mm
including nuts and bolts with connections.
a) Material
4.3.16 Aluminium Lugs up to 50 sqmm each 1 20 20.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.013 415.00 5.40
8.1.81 Helper day 0.013 370.00 4.81
Rate per Each 30.21

Sundries such as bolts and nuts. 2.89


Total for Termination of 95Sqmm LT cable 475.00

63 Supply and Fixing of single compression brass cable


glands for 3.5 core, 120 Sq.mmarmoured cable with
brass washers, lugs etc., complete.
15.3.8 Supply and Fixing of heavy duty flange type brass cable
glands for 3.5 core, 120 Sq.mm PVC armoured cable
with brass washers complete.
a) Material
4.2.7 Brass cable gland suitabtle for 3.5core 120 Sq.mm each 1
armoured cable 264.00 264.00
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.083 480.00 39.84
8.1.81 Helper day 0.083 370.00 30.71

Modular Page No : 41
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
Rate per Each 334.55
Note : Labour is Considered for 15 jobs / day
15.4.20 Supply and fixing of crimping type aluminium lugs
confirming to I.S specifications for cable of 120Sq.mm
including nuts and bolts with connections.
a) Material
4.3.19 Aluminium Lugs up to 120 sqmm each 1 35 35.00
b) Labour charges for crimping
8.1.73 Semi Skilled Electrician day 0.02 480.00 9.60
8.1.81 Helper day 0.02 370.00 7.40
Rate per Each 52.00
For Three Nums 156
15.4.18 Supply and fixing of crimping type Aluminium lugs
confirming to I.S specifications for cable of 70 Sq.mm
including nuts and bolts with connections.
a) Material
4.3.17 Aluminium Lugs up to70 sqmm each 1 25 25.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.013 415.00 5.40
8.1.81 Helper day 0.013 370.00 4.81
Rate per Each 35.21

Sundries such as bolts and nuts. 2.24


Total for Termination of 120Sqmm LT cable 528.00

64 Supply and Fixing of single compression brass cable


glands for 3.5 core, 150 Sq.mmarmoured cable with
brass washers, lugs etc., complete.
15.3.9 Supply and Fixing of heavy duty flange type brass cable
glands for 3.5 core, 150 Sq.mm PVC armoured cable
with brass washers complete.
a) Material
4.2.7 Brass cable gland suitabtle for 3.5core 150 Sq.mm each 1
armoured cable 264.00 264.00
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.083 480.00 39.84
8.1.81 Helper day 0.083 370.00 30.71
Rate per Each 334.55
Note : Labour is Considered for 15 jobs / day
15.4.21 Supply and fixing of crimping type aluminium lugs
confirming to I.S specifications for cable of 150Sq.mm
including nuts and bolts with connections.
a) Material
4.3.20 Aluminium Lugs up to150 sqmm each 1 40 40.00
b) Labour charges for crimping
8.1.73 Semi Skilled Electrician day 0.04 480.00 19.20
8.1.81 Helper day 0.04 370.00 14.80
Rate per Each 74.00
For Three Nums 222
15.4.18 Supply and fixing of crimping type Aluminium lugs
confirming to I.S specifications for cable of 70 Sq.mm
including nuts and bolts with connections.
a) Material
4.3.17 Aluminium Lugs up to 70 sqmm each 1 25 25.00

Modular Page No : 42
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.013 415.00 5.40
8.1.81 Helper day 0.013 370.00 4.81
Rate per Each 35.21

Sundries such as bolts and nuts. 3.24


Total for Termination of 150Sqmm LT cable 595.00

65 Supply and Fixing of single compression brass cable


glands for 3.5 core, 185 Sq.mmarmoured cable with
brass washers, lugs etc., complete.
15.3.10 Supply and Fixing of heavy duty flange type brass cable
glands for 3.5 core, 185 Sq.mm PVC armoured cable
with brass washers complete.
a) Material
4.2.1 Brass cable gland suitabtle for 3.5core 185 Sq.mm each 1
armoured cable 327.00 327.00
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.083 480.00 39.84
8.1.81 Helper day 0.083 370.00 30.71
Rate per Each 397.55
Note : Labour is Considered for 15 jobs / day
15.4.22 Supply and fixing of crimping type aluminium lugs
confirming to I.S specifications for cable of 185Sq.mm
including nuts and bolts with connections.
a) Material
4.3.21 Aluminium Lugs up to185 sqmm each 1 46 46.00
b) Labour charges for crimping
8.1.73 Semi Skilled Electrician day 0.04 480.00 19.20
8.1.81 Helper day 0.04 370.00 14.80
Rate per Each 80.00
For Three Nums 240
15.4.19 Supply and fixing of crimping type Aluminium lugs
confirming to I.S specifications for cable of 95 Sq.mm
including nuts and bolts with connections.
a) Material
4.3.18 Aluminium Lugs up to 95 sqmm each 1 27 27.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.016 415.00 6.64
8.1.81 Helper day 0.016 370.00 5.92
Rate per Each 39.56

Sundries such as bolts and nuts. 2.89


Total for Termination of 185Sqmm LT cable 680.00

66 Supply and Fixing of single compression brass cable


glands for 3.5 core, 240 Sq.mmarmoured cable with
brass washers, lugs etc., complete.
15.3.11 Supply and Fixing of heavy duty flange type brass cable
glands for 3.5 core, 240 Sq.mm PVC armoured cable
with brass washers complete.
a) Material
4.2.2 Brass cable gland suitabtle for 3.5core 240 Sq.mm each 1
armoured cable 491.00 491.00

Modular Page No : 43
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.083 480.00 39.84
8.1.81 Helper day 0.083 370.00 30.71
Rate per Each 561.55
Note : Labour is Considered for 15 jobs / day
15.4.24 Supply and fixing of crimping type aluminium lugs
confirming to I.S specifications for cable of 240Sq.mm
including nuts and bolts with connections.
a) Material
4.3.22 Aluminium Lugs up to240 sqmm each 1 71 71.00
b) Labour charges for crimping
8.1.73 Semi Skilled Electrician day 0.04 480.00 19.20
8.1.81 Helper day 0.04 370.00 14.80
Rate per Each 105.00
For Three Nums 315
15.4.20 Supply and fixing of crimping type Aluminium lugs
confirming to I.S specifications for cable of 120 Sq.mm
including nuts and bolts with connections.
a) Material
4.3.19 Aluminium Lugs up to 120 sqmm each 1 35 35.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.02 415.00 8.30
8.1.81 Helper day 0.02 370.00 7.40
Rate per Each 50.70

Sundries such as bolts and nuts. 2.75


Total for Termination of 240Sqmm LT cable 930.00

67 Supply and Fixing of single compression brass cable


glands for 3.5 core, 300 Sq.mmarmoured cable with
brass washers, lugs etc., complete.
15.3.12 Supply and Fixing of heavy duty flange type brass cable
glands for 3.5 core, 300 Sq.mm PVC armoured cable
with brass washers complete.
a) Material
4.2.3 Brass cable gland suitabtle for 3.5core 240 Sq.mm each 1
armoured cable 578.00 578.00
b) Labour charges for fixing glands.
8.1.73 Skilled Electrician day 0.1 480.00 48.00
8.1.81 Helper day 0.1 370.00 37.00
Rate per Each 663.00
Note : Labour is Considered for 15 jobs / day
15.4.25 Supply and fixing of crimping type aluminium lugs
confirming to I.S specifications for cable of 300Sq.mm
including nuts and bolts with connections.
a) Material
4.3.23 Aluminium Lugs up to 300 sqmm each 1 92 92.00
b) Labour charges for crimping
8.1.73 Semi Skilled Electrician day 0.05 480.00 24.00
8.1.81 Helper day 0.05 370.00 18.50
Rate per Each 134.50
For Three Nums 404

Modular Page No : 44
Sl.No SD/SSR Quantity Rate Rs. Amount Rs.
No. Description of work Unit
15.4.21 Supply and fixing of crimping type Aluminium lugs
confirming to I.S specifications for cable of 150 Sq.mm
including nuts and bolts with connections.
a) Material
4.3.20 Aluminium Lugs up to 150 sqmm each 1 40 40.00
b) Labour charges for crimping
8.1.74 Semi Skilled Electrician day 0.04 415.00 16.60
8.1.81 Helper day 0.04 370.00 14.80
Rate per Each 71.40

Sundries such as bolts and nuts. 2.10


Total for Termination of 300Sqmm LT cable 1140.00

Cable Tray
68 Supply and Installation of 300mm x 50mm x 1.6 mm thick
GI perforated cable tray without cover along with
required angle supports, with coupler plates, Anchor
bolts and nuts etc complete and the tray should be fitted
on the stone masonary wall by providing hole in the wall
ahere ever necessary and also including necessary
masonary work etc., complete.

a) Material
4.6.4 300 x 50 x 2 mm cable tray Mtr 1 725.00 725.00
Deduct 30% for without cover 217.50
507.50
Deduct for reducing thickness from 2 to 1.6mm 101.50
Rate per Each 406.0

Modular Page No : 45
ELECTRICAL Qnty

S.No DESCRIPTION QTY

Conduit
25mm dia, 2mm thick PVC Conduit
1 600
in ceiling
25mm dia, 1.5mm thick PVC Conduit
2 500
in wall

Point Wiring
3 1 Switch, 1 Control points 119
6A 3/2 Socket with Switch on
4 16
common board
6A 3/2 Socket with Switch on
5 2
seperate board
6 16A Socket with 16A Switch 10
7 20A AC point distribution board 0
8 63A TP Sockets with MCCB 0
9 Telephone jack 0
10 LAN Sockets 0
11 TV 0
12 computer socket 0
131
h Load 137

Circuit Wiring
13 1x1.5Sqmm 300
14 3x1.5Sqmm 50
15 3R x 2.5Sq.mm 400
16 3R x 4Sq.mm 200
17 2R x 6Sq.mm 30
18 5R x 6Sq.mm 0
19 4R x 16Sq.mm 50
20 2 pair Telephone cable 0
21 Co- Axial cable 0
22 Cat-6(E) LAN Cable 0

Lighting fixtures/ fittings


23 Low bay fitting 20
24 1 x 20W LED tube light 57
25 SBH/HB 8
26 Ceiling Fans 15
27 Calling bells 0
27 Ceiling Points (only ceiling rose) 3
28 Exhaust Fan 16
29 2x 36W fittings
30 Low bay fitting
Load
Distribution Board
29 8- Way SPN LDB 1
30 8- Way SPN PDB 0
31 4- Way TPN LDB 1
32 4- Way TPN PDB 0
32 4- Way VTPN 0
33 8- Way VTPN 0
Total Load
FLOOR ELECTRICAL DETAILS

PDB
LDB
Low Bay Fitting
KREEDA VIKASA KENDRA

ceiling point

6A common
Exhaust fan

6A separate

125A MCCB
63A MCCB
INDOOR HALL AT PUNGANUR,

telephone
Tube light

television

push bell
lan point
16A Soc

SPN DB

SPN DB
CHITTOOR DISTRICT.

TPN DB

TPN DB
Sbh/BH
Fan

AC

CP
0 65 20 60 15 60 100 100 1000 2400 0 0 0 150 10
Ground Floor 3 0 46 9 8 8 13 2 10 0 0 0 0 0 0 0 0 0 1 0 0
First Floor 0 20 11 6 0 8 3 0 0 0 0 0 0 0 0 0 0 1 0 0 0
TOTAL QTY 3 20 57 15 8 16 16 2 10 0 0 0 0 0 0 0 0 1 1 0 0
0
0
0
4-Way
8-Way VTPN
DB

0
0
0
Watts

2660
16220
13560
ESTIMATE

Toilet, Gandhi Medical Hospital


Providing Internal Electrification
( SoR 2014-15)

A HOSPITAL BUILDING

S. Description of Work Rate (Rs.)


Quantity Unit
NO. in fig.

CONDUIT PIPE

1 0 RM Supply and fixing of 25mm outer dia 2.20 mm thick ONE RM 60.00
Heavy grade PVC pipe (ISI MARK) concealed in Roof
Slabs with all required MS deep boxes and all
accessories including and labour charges etc.,
complete.
Makes:- Sudhakar/ Modi.
2 0 RM Supply and fixing of 25mm outer dia Medium grade ONE RM 66.00
(1.8 mm thick) P.V.C. pipe (ISI MARK) concealed in
wall with all required MS junction boxes and all
accessories including masonary work for light, Fan
and separate plug point with MS Modular switch box
including all labour charges etc., complete for EPABX,
LAN, and CCTV, Bell, light, Fan points.
Makes:- Sudhakar/ Modi.

3 0 Nos Supply and erecting MS galvanished Fan hook box EACH 49.00
with hook in RCC slab including all Labour charges
etc., complete.

WIRING

4 515 PTS Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS EACH 508.00
P.V.C. insulated flexible copper cable (ISI MARK) in POINT
existing pipe with 6A Modular switch, Ceiling
rose/BH/SBH Modular switches with cover plate
including all labour charges etc., complete. (for
Non-Residential Building)
Makes of wires:- L&T /Finolex/ RPG / Havells /
V-Guard / HPL/ Power Flex / Polycab /Anchor/
Gold Medal / Standard / Milion/ fortune Art /
Suncab.
Makes of switches/sockets:- Cabtree Thames
Platinum / GM / Million /Anchor Roma viola /
Toyoma / L&T / fortune Art / CPL.
S. Description of Work Rate (Rs.)
Quantity Unit
NO. in fig.
5 515 PTS Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS EACH 762.00
P.V.C. insulated flexible copper cable (ISI MARK) in POINT
existing pipe with 6A Modular switch, Ceiling
rose/BH/SBH Modular switches with cover plate
including all labour charges etc., complete (Non-
Residential Building) for Staircase points. ( 2
way Switch ).
Makes of wires:- L&T /Finolex/ RPG / Havells /
V-Guard / HPL / Power Flex / Polycab /Anchor/
Gold Medal / Standard / Milion/ fortune Art /
Suncab.
Makes of switches/sockets:- Cabtree Thames
Platinum / GM / Million /Anchor Roma viola /
Toyoma / L&T / fortune Art / CPL.

6 0 PTS Wiring with three runs of 1.5 sq.mm FRLS P.V.C. EACH 298.00
insulated flexible copper cable (phase, neutral, earth) POINT
in the existing conduit pipe with 6 Amps Modular type
switch, and 6 A 3/2 pin Modular type socket with
cover plate on common switch board etc., complete.
Makes of wires:- L&T /Finolex/ RPG / Havells /
V-Guard / HPL / Power Flex / Polycab /Anchor/
Gold Medal / Standard / Milion/ fortune Art /
Suncab.
Makes of switches/sockets:- Cabtree Thames
Platinum / GM / Million /Anchor Roma viola /
Toyoma / L&T / fortune Art / CPL.

7 0 PTS Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS P.V.C. EACH 452.00
insulated flexible copper cable (ISI MARK) in existing POINT
pipe with 6A switch and 6A, 3/2 pin socket Modular
type with 6A switch control and MS boxes with cover
plate fixing on separate board including all labour
charges etc., complete.
Makes of wires:- L&T /Finolex/ RPG / Havells /
V-Guard / HPL / Power Flex / Polycab
/Anchor/ Gold Medal / Standard / Milion/
fortune Art / Suncab.
Makes of switches/sockets :- Cabtree Thames
Platinum / GM / Million /Anchor Roma viola /
Toyoma / L&T / fortune Art / CPL.
S. Description of Work Rate (Rs.)
Quantity Unit
NO. in fig.
8 0 PTS Wiring with 2 of 22/0.3mm (1.5 Sq.mm) FRLS P.V.C. EACH 921.00
insulated flexible copper cable (ISI MARK) in existing POINT
pipe with 6A Modular switch control- 3nos and 6A, 3/2
pin Modular sockets - 3 nos fixing on separate board
including all labour charges etc., complete. ( for
LABs & Computer Use )
Makes of wires:- L&T /Finolex/ RPG / Havells /
V-Guard / HPL / Power Flex / Polycab
/Anchor/ Gold Medal / Standard / Milion/
fortune Art / Suncab.
Makes of switches/sockets :- Cabtree Thames
Platinum / GM / Million /Anchor Roma viola /
Toyoma / L&T / fortune Art / CPL.

9 4 NOS S&D of 16A/6A, 2 in one socket with 16A switch EACH 348.00
control modular type with MS flush boxes with front
cover plate including all labour charges etc.,
complete.
Makes of switches/sockets:- Cabtree Thames
Platinum / GM / Million /Anchor Roma viola /
Toyoma / L&T / fortune Art / CPL

RUN of MAINS

10 0 RM Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS ONE RM 20.00


P.V.C. insulated flexible copper cable in existing pipe
for earth continuity including all labour charges etc.,
complete.
Makes of wires:- Polycab/Havells/Sun Cab/Gold
Medal/ Million /fortune Art / HPL / L&T / Power
Flex/RPG /Anchor

11 0 RM Supply and run of 3 of 1.5 sq.mm (phase neutral and ONE RM 60.00
earth) FRLS PVC insulated flexible copper cable in
existing MS conduit pipe for sub-circuits including
labour charges etc., complete as required for small
switch boards.
Makes of wires:- Polycab/Havells/Sun Cab/Gold
Medal/ Million /fortune Art / HPL / L&T / Power
Flex/RPG /Anchor

12 0 RM Supply and run of 3 of 2.5 sq.mm (phase neutral and ONE RM 85.00
earth) FRLS PVC insulated flexible copper cable in
existing MS conduit pipe for individual ligting circuits
including labour charges etc., complete as required
for switch boards.
Makes of wires:- KEI / Polycab / Havells / GM /
Million / HPL / Gold Medal / Power Flex / RPG /
Anchor / Great White Sun Cab / Fortune Art.
S. Description of Work Rate (Rs.)
Quantity Unit
NO. in fig.
13 0 RM Supply and 3 runs of 4.0 sq mm (phase neutral and ONE RM 120.00
earth) FRLS PVC insulated flexible copper cable in
existing conduit pipe for run of mains including
labour charges etc., complete as required including
labour charges for 16A sockets.
Makes of wires:- KEI / Polycab / Havells / GM /
Million / HPL / Gold Medal / Power Flex / RPG /
Anchor / Great White Sun Cab / Fortune Art.

14 0 RM Supply & run of 3 of 6.0 Sqmm (84/0.3mm) (phase ONE RM 177.00


neutral and earth) FRLS PVC insulated flexible copper
cable in existing MS conduit pipe for run of mains
including labour charges etc. complete for AC points
& SDB's etc as required.
Makes of wires:- Polycab/Havells/Sun Cab/Gold
Medal/ Million /fortune Art / HPL/L&T / Power
Flex/RPG /Anchor

15 0 RM Supply and run of 5 of 6 Sq mm (phases, neutral and ONE RM 295.00


earth) FRLS PVC insulated flexible copper cable in
existing MS conduit pipe for circuits including labour
charges etc. complete as required for run of mains
from Lighting panel board to TPN DB'S with pin type
lugs and connections. [for LDBs]
Makes of wires:- KEI / Polycab / Havells / GM /
Million / HPL / Gold Medal / Power Flex / RPG /
Anchor / Great White Sun Cab / Fortune Art.

16 0 RM Supply & run of 5 of 10.0 Sqmm (phases, neutral and ONE RM 447.00
earth) FRLS PVC insulated flexible copper cable in the
existing conduict pipe for run of mains from Power
panel board to TPN DB"s with pin type lugs and
connections etc., complete. [for PDBs]
Makes of wires:- KEI / Polycab / Havells / GM /
Million / HPL / Gold Medal / Power Flex / RPG /
Anchor / Great White Sun Cab / Fortune Art.

DISTRIBUTION BOARDS

17 0 NOS Supply and fixing single phase DB in sheet steel EACH 1491.00
enclosure with metallic plug and socket with 1 No.
20/32A,10KA 'c' curve SPMCB (Motor characteristics
MCBs) control including making connections etc.,
complete concealing in wall for A.C. points etc.
Makes : Legrand / Schneider.
S. Description of Work Rate (Rs.)
Quantity Unit
NO. in fig.
18 0 NOS Supply and fixing of TPN 4 way distribution board IP- EACH 7207.00
43 (8+12 Module) with provision to accommodate the
ELCB incomer and suitable for single pole outgoing
MCB's in sheet Steel enclosure with 32A 4 pole MCB
as incomer and 12 No of 6 to 32 Amps single pole, 10
KA breaking capacity 'c' Curve MCB outgoings
including making connections etc., complete
concealing in wall. (LIGHTING DB's) Makes :
Legrand / Schneider.

19 0 NOS Supply and fixing of TPN 4 way distribution board IP- EACH 7825.00
43 (8+12 Mofule) with provision to accommodate
ELCB as incomer and suitable for single pole outgoing
MCB's in sheet Steel enclosure with 63 Amps 4 pole
MCB as incomer and 12 No of 6 to 32 Amps single
pole, 10 KA breaking capacity 'c' curve MCBs as
outgoings including making connections etc.,
complete concealing in wall.

(POWER
DB's) Makes : Legrand / Schneider.
20 0 NOS Supply and fixing of SPN 8 way distribution board IP- EACH 4076.00
42 flushed in wall suitable for single pole outgoing
MCB's in sheet Steel enclosure with 40Amps DP MCB
as incomer and 6 No of 6 to 32 Amps single pole, 10
KA breaking capacity 'c' Curve MCBs as outgoings
including connections and labour charges etc.,
complete concealing in wall.
Makes : Legrand / Schneider.

21 0 Nos Supply and fixing of cable adopteres box with cover EACH 600.00
for DBs including, massanory work etc., complete.,
Makes : Legrand / Schneider.

EARTHINGS

22 0 NOS Providing independent earthing for Important EACH 3718.00


equipment with 40mm dia 'B' class 2.5m long G.I pipe
and 19mm dia 'B' class G.I pipe of 0.3mtr. long
connected with reducer providing G.I funnel with
mesh enclosed in C.C.Chamber of 400m x 400m x
400mm with R.C.C. Slab cover duly providing
staggered holes filling with salt and charcoal from the
bottom of the pipe giving earth connection from
electrode through G.I strip of 40 x 6mm x 200mm
length with all accessories and labour charges
complete, as per IS specifications 732/1982 (Part II)
S. Description of Work Rate (Rs.)
Quantity Unit
NO. in fig.
23 0 NOS Providing independent earthing for Sophisticated EACH 9888.00
Electronic equipment with 600mm x 600mm x
3.15mm thick copper plate rigidly fixed to 40mm dia
G.I Pipe of 2.5mtr. length filling with salt and
charcoal giving earth connection from electrode G.I
strip of 40 mm x 6mm x 200mm length and hume
pipe with all accessories and labour charges complete
as per IS specification 732/1982 (Part II).

24 0 RM Supply and run of 25mmX3mm copper strip including ONE RM 417.00


cost of all accessories and labour charges etc
complete.
25 0 RM Supply and run of No. 8SWG GI wire including cost of ONE RM 15.00
all accessories and labour charges etc complete.

26 0 RM Supply and run of 25mmX6mm GI strip including cost ONE RM 96.00


of all accessories and labour charges etc complete.

27 0 RM Supply and run of 50mmX6mm GI strip including cost ONE RM 161.00


of all accessories and labour charges etc complete.

FIXTURES

28 57 NOS Supply, Transportaton, and fixing of 4-28W box type EACH 1039.00
tube light fitting with 28Watt electronic ballast with all
accessories with 40Watt tube and operating voltage
90 to 350 Volts, power factor 0.98 and harmonics
shall be as per IS specifications including all labour
charges and conveyance of all materials etc complete
with with flexible wire and connections.
( Trinic Make only with 4 Years
Warranty., )
30 0 NOS Supply, Transportaton, installation, testing and EACH 4430.00
commissioning of 2X 36 Watt CFL recessed mounted
mirror optic fitting with P5 Lowers, suitable for 2 Nos
36W CFL lamps,energy saving electronic ballast
including all labour charges and conveyance of all
materials etc complete with wire leads and
connections required anchor hold fasteners and GI
wire..
(Makes: Wipro/ Phillips make fittings as
desired by the dept equivalent models).
31 221 NOS Supply and fixing of BH/SBH in lieu of ceiling rose EACH 11.00
with 1 NO 3-5 W bulb with connections etc., complete
with labour charges
(Gold Medal / Million )
S. Description of Work Rate (Rs.)
Quantity Unit
NO. in fig.
32 0 NOS Supply, Transportation of Ceiling fan 48"(1200mm) EACH 1600.00
ceiling fans with 3 blades & double ball bearings with
out Regulators and all standard accessories and
giving connections etc., complete.
Make: Crompton High Speed / Orient Summer
Pride PSPO / Bajaj Ultima / Havells Velocity.

33 0 NOS Supply and fixing of modular Electronic stept type fan EACH 473.00
regulator hum free step type socket size with MS
box, front plate in the existing switch board ( Modular
Type )
Make: MK / Cabtree / anchor roma / Salzar /
Legrand / Mosaic model as per Dept., Direction.

34 0 RM Supply and erecting 19/20mm steel tube down rod of ONE RM 105.00
one meter length with bolts & nuts duly painted with
matching colour of fan complete.
35 0 NOS Labour charges for Fixing of Ceiling fan including EACH 100.00
giving connections with twin core wire etc., complete.

36 37 NOS Supply,Transportation of Light duty exhaust fan EACH 1350.00


12"(300 mm) size1350 rpm with metal blades
wiremesh with all accessories etc complete
Make: Orient/ Crompton
Greeves/GE/Almonard/ Bajaj Fresh.
37 200 NOS Supply,Transportation of Heavy duty exhaust fan EACH 2645.00
12"(300 mm) size with all accessories such as louver
shutter etc.,
Make: Orient/ Crompton Greeves/Bajaj / /
Almonard.
38 237 NOS Labour charges for fixing of Exhaust fan in wall with EACH 465.00
necessary connections and masonary work of making
hole, finishing etc., complete.
39 237 NOS Supply and fixing of louver shutter suitable for 12" EACH 250.00
Exhaust fan including all labour charges etc complete
with connections and colouring matching to the wall
with enamel paint.
S. Description of Work Rate (Rs.)
Quantity Unit
NO. in fig.
40 0 NOS Supply, installation, testing and commissioning of EACH 103105.00
wall/floor mounting type panel board with alluminium
bus bars fabricated with 16 Gauge CRCA Sheet
comprising of TPN bus bars of equal size in all phases
and neutral equipped with bus bar chambers and
cable chambers.The bus bars fault level shall be 50
KA and shall be as per the requirement of local CEIG,
fire regulations, CPRI norms and other authorities etc.
The painting of the complete system shall be powder
coated duly processing the panel in 7 tank process.
The panel shall be suitable for accomdating the
following switch gear including supply of all
components, hard wares etc including all necessary
civil works, adequate reinforcement, foundation bolts,
suitable G.I earth strip 50 x 6mm, door loop
earthings, bus bars should be colour sleeved with heat
shrinkable sleeves for phase and neutral duly
supported at regular intervels by

SMC supports and all cables shall have proper cable


entry, danger board, feeder identification marks, rigid
inter connections, cadmium plated bolts and nuts and
shall be installed on wall/flooring and consisting of the
following as required and as per IS standards for
[SUB FLOOR POWER PANEL IN ELECTRICAL
ROOM - 1, 2, 3 & 4 in all floors] Panel shall be
manufacture only from CPRI approval
Fabricators.

400A Aluminium Bus Bar with colour code.


(0.8A/Sqmm).
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Incommer: 250A, 4 Pole, MCCB, 36/35 KA - 1 No.
Makes: L&T / Siemens / schenieder.

Metering Set:
0- 250A Digital Ammeter with selector switch . - 1
No.(conserve / Elmeasure)
0-500V Digital Volt meter with selector switch - 1 No.
( conserve / Elmeasure make)
R, Y, B Indication lamps of LED type - 3 Nos.
250/5A C.T coils - 3 Nos.
20A Bakelite Fuse Fittings - 3 Nos.
2A HRC Fuse link - 3 Nos.
Outgoing:-
125A, TP, MCCB, 35/36 KA - 4 Nos
Makes: L&T / Siemens / schenieder.
63A, TP, MCB, 25 KA - 14 Nos
Makes: Legrand / schenieder.
S. Description of Work Rate (Rs.)
Quantity Unit
NO. in fig.
40 0 NOS Supply, installation, testing and commissioning of EACH 59000.00
wall/floor mounting type panel board with alluminium
bus bars fabricated with 16 Gauge CRCA Sheet
comprising of TPN bus bars of equal size in all phases
and neutral equipped with bus bar chambers and
cable chambers.The bus bars fault level shall be 50
KA and shall be as per the requirement of local CEIG,
fire regulations, CPRI norms and other authorities etc.
The painting of the complete system shall be powder
coated duly processing the panel in 7 tank process.
The panel shall be suitable for accomdating the
following switch gear including supply of all
components, hard wares etc including all necessary
civil works, adequate reinforcement, foundation bolts,
suitable G.I earth strip 50 x 6mm, door loop
earthings, bus bars should be colour sleeved with heat
shrinkable sleeves for phase and neutral duly
supported at regular intervels by

SMC supports and all cables shall have proper cable


entry, danger board, feeder identification marks, rigid
inter connections, cadmium plated bolts and nuts and
shall be installed on wall/flooring and consisting of the
following as required and as per IS standards for [SUB
FLOOR LIGHTING PANEL IN ELECTRICAL ROOM - 1,
2, 3 & 4 ] Panel shall be manufacture only from CPRI
approval Fabricators.

200A Aluminium Bus Bar with colour code.


(0.8A/Sqmm).
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Incommer: 160A, 4 Pole, MCCB, 36/35 KA - 1 No.
Makes:
MeteringL&T Set:/ Siemens / schenieder.
0- 160A Digital Ammeter with selector switch . - 1
No.(conserve
0-500V Digital/ Volt
Elmeasure)
meter with selector switch - 1 No.
(R,conserve
Y, B Indication lampsmake)
/ Elmeasure of LED type - 3 Nos.
160/5A C.T coils - 3 Nos.
20A Bakelite Fuse Fittings - 3 Nos.
2A HRC Fuse link - 3 Nos.
Outgoing:-
63A, TP, MCB, 25 KA - 14 Nos
Makes:charges
Labour Legrand etc/ complete
schenieder.
with connections for
Finished item of work.
Labour charges etc complete with connections for
Finished item of work.
U.G CABLES
41 Supply of the Following PVC XLPE armoured cable
1100 V Grade with ISI mark stranded / solid,
aluminimum conductor complete
Make: RPG/ POLY CAB/ Havells/Finolex/
Paragan / Unicab/ V-Guard/ fortune Art
EBXL.
a 0 RM 3.5 Core 185.00 Sq.mm. ONE RM 806.00
S. Description of Work Rate (Rs.)
Quantity Unit
NO. in fig.
b 0 RM 3.5 Core 70.00 Sq.mm. ONE RM 363.00

42 0 RM Earth work excavation of Trench in hard ground soil, ONE RM 166.00


laying of U.G cables of size up to 70 Sqmm on sand
cusion covering the cable with bricks and back filling
of Trench duly providing route indicator (as per
general instruction S.No. 14 of SSR) embedded in C.C
including cost and conveyance of materials and
labour charges etc., complete.
42 0 RM Labour charges for run of U.G cable on wall / existing ONE RM 32.00
pipe/tray with necessary fixing arrangments such as
saddles, clamps,wooden separators etc., (as directed
by departmental official) for the cables.

CABLE GLANDS:
43 S&fixing of heavy duty flange type brass cable glands
of following sizes for PVC armoured cables with brass
washers, earth tag etc complete including all labolur
charges.
a 0 NO 185Sq.mm EACH 327.00
b 0 NO 70 to 150 Sq.mm EACH 264.00

ALUMINIUM LUGS:

44 Supply and fixing of crimping type Aluminium lugs


confirming to IS specifications for following cables
including nuts and bolts with connections.
a 0 NO 185Sq.mm EACH 46.00
b 0 NO 95 Sq.mm EACH 27.00
c 0 NO 35Sq.mm EACH 17.00
d 0 NO 70Sq.mm EACH 25.00

Split type Air-Conditiner,

Supply, transportation and Installation of Split type


Air-Conditiner, fitted with Hermetically sealed
compressor, Operating on refrigerant R-22 / Non -
CFC High wall mounting confirming to IS : 1391,
suitable for operation on 230V, 50 Hz.., Single phase,
A.C Supply capable of performing Cooling
Dehumidifying, Air Circulating, Filtering with cooling
and condensing units, up to 5 Mtr of required size of
copper piping duly insulated and 3 core copper
flexible chord of required length etc., complete.

a 0 No 1.5 Ton ( 5 STAR) EACH 46890.00


Makes : Daikin FT-M / Carrier Estrella / Blue Star
5HW18DBF1.
S. Description of Work Rate (Rs.)
Quantity Unit
NO. in fig.
Perforated cable tray

45 0 Mtr Supply and Installation of 300mm x 50mm x 2mm One Rm 725.00


thick GI perforated cable tray without cover along
with required angle supports, with coupler plates,
suspension rods. anchor bolt fasteners, and nuts etc
complete and the tray should be fitted on the stone
masonary wall by providing hole in the wall wherever
necessary and including necessary masonary work
etc., complete with all required accessories complete.

Telephone

46 0 RM Supply and laying of 2 pair telephone wire 0.5mm ONE RM 17.00


copper in the existing metallic/non metallic conduit
pipe with connections etc., complete.
Makes: Finolex/L&T/Gold Medal/Million/
Delton/ Polycab/ RPG
47 0 NOS Supply and fixing of 2 Line telephone jack socket Each 183.00
model modular type with connector front and back
plate in existing modular box with screws connections
etc., complete.
(makes :- Cabtree Thames Platinum / GM /
Million /Anchor Roma viola / Toyoma / L&T /
fortune Art / CPL)
48 0 Nos Supply and fixing of 20 pair MDF krone pair box with Each 1226.00
MS enclosure with lock and key arrangement etc
complete with all labour charges.

49 0 RM Supply and laying of 20 pair telephone wire 0.5mm ONE RM 84.00


copper in the existing metallic/non metallic conduit
pipe with connections etc.,completeTelephone wire

Makes: Finolex/Delton/ Surabi/ Polycab.

LAN

50 0 Nos Supply and termination of cat-6 RJ 45 out lets Each 393.00


including dual face plate of Makes Beldan/D
Link/Legrand/AMP/Krone
51 0 RM Supply and laying of Cat 6 UTP cable including all ONE RM 33.00
taxes etc complete.
Make : D-Link/AMP/Krone/Finolex.

52 0 NOS Supply and fixing of water cooler fully stainless steel Each 42994.00
of capacity 60/120 to be operated on single phase
supply with ISI mark.
Makes Blue star / Voltas / Usha.

GRAND TOTAL:
Amount (Rs.)

0.00

0.00

0.00

261620.00
Amount (Rs.)
392430.00

0.00

0.00
Amount (Rs.)
0.00

1392.00

0.00

0.00

0.00
Amount (Rs.)
0.00

0.00

0.00

0.00

0.00
Amount (Rs.)
0.00

0.00

0.00

0.00

0.00
Amount (Rs.)
0.00

0.00

0.00

0.00

0.00

59223.00

0.00

2431.00
Amount (Rs.)
0.00

0.00

0.00

0.00

49950.00

529000.00

110205.00

59250.00
Amount (Rs.)
0
Amount (Rs.)
0.00

0
Amount (Rs.)
0

0.00

0
0

0
0
0.00
0.00

0.00
Amount (Rs.)

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

1465501.00
NAME OF WORK:- INTERNAL ELECTRICAL ESTIMATION FOR CONSTRUCTION OF KREEDA VIKASA KENDRAM INDOOR HALL AT
PUNGANUR, CHITTOOR DISTRICT.

FINISHED DATAS – SSR 2018-19

Sl.No SD/SSR No. Description of work Unit Quantity Rate Rs. Amount Rs.
CONDUIT PIPE
PVC PIPE
( Make : Sudhakar/Modi/Atul)
25mm PVC pipe
DATA 1.4.2(c) Supply and Fixing of 25mm outer dia 2.2mm thick Heavy grade PVC pipe (ISI MARK) concealed in Roof
Slabs with all required MS deep boxes and all accessories including and labour charges etc., complete.
Makes:- Sudhakar/Modi/Atul.

Taking Output = 100 M


a) Material
ELEC-1.2.1-b 25mm dia 2.2 mm thick PVC pipe 100 M 1 3000.00 3000
ELEC-1.2.7-b 25mm dia MS 1,2,3 & 4 way deep MS Deep Junction Box Each 12 24.00 288

ELEC-1.2.8-b 25mm PVC bends Each 12 7.00 84


b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 2 555.00 1110
ELEC-8.1.76 Semi skilled Electrician day 2 440.00 880
ELEC-8.1.77 Helpers day 2 440.00 880
Sundries like binding wire, shellac, sand etc.,
C) Cost for 100 RM 6242.00
Rate per Metre 62.42

25mmPVC pipe
DATA 1.4.2(b)
Supply and Fixing of 25mm outer dia Medium grade ( 1.8 mm Thick ) P.V.C. pipe (ISI MARK) concealed in
wall with all required MS Deep Boxes and all accessories including masonary work for light, fan and
separate plug point with MS modular switch box including all labour charges etc., complete. for EPABX,
LAN, and CCTV, Run of mains, light, fan points.
Makes:- Sudhakar/Modi/Atul.

Taking Output = 100 M


a) Material
ELEC-1.2.2-b 25mm dia 1.5mm thick PVC pipe 100M 1 2500.00 2500
ELEC-8.1.4 U' Links 100 Nos 2 30.00 60
ELEC-1.2.7-b 25mm dia MS 1,2,3 & 4 way deep MS Deep Junction Box Each 12 24.00 288

ELEC-1.2.8-b 25mm PVC bends Each 12 7.00 84


ELEC-8.4.11 Cement kg 50 8.00 400
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 2 555.00 1110
ELEC-8.1.76 Semi skilled Electrician day 2 440.00 880
ELEC-8.1.77 Helpers day 2 440.00 880
ELEC-8.1.78 Mason Ist class day 2 475.00 950
Sundries
C) Cost for 100 RM 7152.00
Rate per Metre 71.52

Fan Hook
DATA 9.7.24 Supply and erecting MS Galvanished fan hook box with hook in RCC slab including all Labour charges
etc., complete.

a) Material
ELEC-8.1.22 Consealed box PVC / MS with hook for fan each 1 100.00 100.00
ELEC-1.2.28 PVC Box ( LESS COST OF DEEP BOX ) each 1 24.00 24.00
Rate per Each 76.00
Note : Now a days Consealed pvc box used instead of
12/15mm plain M.S rod for Fan hook

LIGHT POINT WITH MODULAR SWITCH


Non - Residential Buildings
LIGHT POINT WITH MODULAR SWITCH IN RB & NRB
Makes of wires:- KEI / Polycab / Havells / GM / Million / HPL / Goldmedal /Kundancab /Power Flex /
RPG / Anchor / Sun Cab / Fortune Art /Great white / Orbit / V-Guard.
Makes of switches:-GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Modular Non- Residential points


DATA 2.1.1
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R flexible copper cable (ISI MARK) in
existing pipe with 6A Modular switch fixing on galvanised hot dip switch box covered with appropriate
front plate module, and Ceiling rose , including all labour charges etc., complete for light, bell, fan and
exhaust fan points in Non -Residential Buildings. Wires.Havells/HPL/RPG. Switches & Plates:- Schneider
Zen Celo/Legrand Arteor/MK Blenge

Taking Output = 6 Points


a) Material
ELEC-1.5.2-b 22/0.3mm FR PVC copper wire 100 M 1 1290.00 1290
ELEC-1.3.1-d Hot Dip Galvanised Metal Box [6-module] each 1 125.00 125
ELEC-1.8.3-d 6-module cover frame each 1 120.00 120
ELEC-1.8.1-a 6A Modular Switch each 6 85.00 510
ELEC-1.7.1-m 6A 2 way Ceiling Rose each 6 19.00 114
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 0.6 555.00 333
ELEC-8.1.76 Semi skilled Electrician day 1.2 440.00 528
ELEC-8.1.77 Helpers day 0.6 440.00 264
Sundries 5
C) Cost for 6 Points 3289
Rate per Points = C/6 548.17
Note : Modular switch boards provided in place of hylam
sheet.

MODULAR SOCKET ON COMMON BOARD


DATA 2.1.4 Supply and fixing of 6A 2 in one socket 6A switch Modular type Switch control MS flush boxes with
cover plate fixing on common board including all labour charges etc., complete.

a) Material
ELEC-1.3.1-b Hot Dip Galvanised Metal Box [3-module] each 1 75.00 75
ELEC-1.8.3-b 3 Module cover frame each 1 70.00 70
ELEC-1.8.1-a 6A Switch 1 way modular switch each 1 85.00 85
ELEC-1.8.1-a 6A 3/2 pin socket modular each 1 130.00 130
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 0.067 555.00 37.185
ELEC-8.1.77 Helpers day 0.067 440.00 29.48
Sundries
Rate per each 426.67

MODULAR SOCKET ON 16A SOCKET


DATA 2.1.6 Supply and Fixing of 16A/6A 1way combi socket modular type with shutter fixing on hot dip galvanised
box covered with appropriate front plate module including earth connections and all labour charges
etc., complete

a) Material
ELEC-1.8.1-h 16A Switch 1 way modular switch each 1 115.00 115
ELEC-1.8.1-I 16A 2 in one socket modular each 1 180.00 180
ELEC-1.3.1-b Hot Dip Galvanised Metal Box [3-module] each 1 75.00 75
ELEC-1.8.3-b 3 Module cover frame each 1 70.00 70
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 0.1 555.00 55.5
ELEC-8.1.76 Semi Skilled Electrician day 0.1 440.00 44
ELEC-8.1.77 Helpers day 0.1 440.00 44
Sundries
Rate per each 583.50
Note : Modular switch boards provided in place of hylam
sheet.

RUN OF MAINS
DATA 3.1.3 Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe
for earth continuity including all labour charges etc., complete.

Taking Output = 100 M


a) Material
ELEC-1.5.2-b 22/0.3mm FR PVC copper wire 100 M 1 1290.00 1290
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 0.34 555.00 188.70
ELEC-8.1.76 Semi Skilled Electrician day 1 440.00 440
ELEC-8.1.77 Helpers day 0.34 440.00 149.6
Sundries 0.575
C) Cost for 100 RM 2068.88
Rate per Metre = C/100 20.69
Note : Labour Charges considered for 150 M / day

DATA 3.1.4 Supply and run of 3 of 36/0.3mm (2.5 Sq.mm) F.R.L.S P.V.C. insulated flexible copper cable in existing pipe
for mains inlcuding all labour charges etc., complete. Makes:Havells/HPL/RPG
Taking Output = 100 M
a) Material
ELEC-1.5.2-c 36/0.3mm (2.5 sqmm) FR PVC copper wire 1Mtr 300.00 20.90 6270.00
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 0.67 555.00 371.85
ELEC-8.1.76 Semi Skilled Electrician day 2.00 440.00 880.00
ELEC-8.1.77 Helpers day 0.67 440.00 294.80
Sundries 14.05
C) Cost for 100 RM 7830.70
Rate per Metre = C/100 78.31

DATA 3.1.5 Supply and run of 3 of 56/0.3mm (4 Sq.mm) F.R.L.S P.V.C. insulated flexible copper cable in existing pipe
for mains inlcuding all labour charges etc., complete. Makes:Havells/HPL/RPG
Taking Output = 100 M
a) Material
ELEC-1.5.2-d 56 /0.3mm (4 sqmm)FR PVC flexible copper wire. 1Mtr. 300.00 32.00 9600.00
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 1.00 555.00 555.00
ELEC-8.1.76 Semi Skilled Electrician day 3.00 440.00 1320.00
ELEC-8.1.77 Helpers day 1.00 440.00 440.00
Sundries 10.00
C) Cost for 100 RM 11925.00
Rate per Metre = C/100 119.25
Note : Labour Charges considered for 100 M / day
DATA 3.1.5.1 Supply and run of 2 of 84/0.3mm (6 Sq.mm) F.R.L.S P.V.C. insulated flexible copper cable in existing pipe
for mains inlcuding all labour charges etc., complete. Makes:Havells/HPL/RPG
Taking Output = 100 M
a) Material
ELEC-1.5.2-e 84 /0.3mm (6 sqmm)FR PVC flexible copper wire. 1Mtr. 200.00 49.95 9990.00
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 1.00 555.00 555.00
ELEC-8.1.76 Semi Skilled Electrician day 3.00 440.00 1320.00
ELEC-8.1.77 Helpers day 1.00 440.00 440.00
Sundries 10.00
C) Cost for 100 RM 12315.00
Rate per Metre = C/100 123.15
Note : Labour Charges considered for 100 M / day

DATA 3.1.6 Supply and run of 4 of 126/0.4mm (16.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe
for mains inlcuding all labour charges etc., complete.Makes:Havells/HPL/RPG
Taking Output = 100 M
a) Material
ELEC-1.5.2-i 126 /0.4mm (16 Sq.mm) FR PVC flexible copper wire. 100 M 4.00 12590.00 50360.00
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 2.00 555.00 1110.00
ELEC-8.1.76 Semi Skilled Electrician day 6.00 440.00 2640.00
ELEC-8.1.77 Helpers day 2.00 440.00 880.00
Sundries 10.00
C) Cost for 100 RM 55000.00
Rate per Metre = C/100 550.00
Note : 4 runs of 16.0 sqmm required for Distribution
Boards so that we multiply the data 3.1.6

Distribution Boards
( Makes : Legrang / Schneider)
DATA 4.4.4 Supply and fixing of 3-ph, 4way horizontal TPN Distribution board with IP-43 protection (Metal Door) as
per IS:13032 with - 1 No 40-63A 10 KA C/D Curve FP MCB for incomer and 12Nos 10kA 6-32A C/D Curve
SP MCBs - for outgoing. including internal connection and labour charges for surface / flush mounting
etc., complete.

Taking Output = each


a) Material
ELEC-2.13.5-c 4way TPN, D.B with IP-43 Protection suitable for 3 phase each 1 2250.00 2250.00
ELCB /FP Isolator as incommer.
ELEC-2.10.1-h 63A, 4 Pole MCB each 1 1750.00 1750.00
ELEC-2.10.1-a 10 kA - 6-32A range SP MCBs each 12 180.00 2160.00
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 0.50 555.00 277.50
ELEC-8.1.76 Semi Skilled Electrician day 1.00 440.00 440.00
ELEC-8.1.77 Helpers day 1.00 440.00 440.00
Sundries such as TW Plugs, Screws Cement etc, LS 7.00
Rate per each 7324.50
2. For concealing, add the following:
ELEC-8.1.76 a 1No. Semi skilled mason day 1.00 440.00 440.00
ELEC-8.4.11 b 1/4 bag cement KG 12.50 8.00 100.00
Rate per each 7,864.50

DATA 4.4.3 Supply and fixing of 1-ph, 8way SPN Distribution board with IP-43 protection (Metal Door) as per
IS:13032 with - 1 No 40-63A 10 KA C/D Curve DP MCB for incomer and 8Nos 10kA 6-32A C/D Curve SP
MCBs - for outgoing. including internal connection and labour charges for surface / flush mounting etc.,
complete.
Taking Output = each
a) Material
ELEC-2.13.2-e 8way SPN, D.B with IP-43 Protection suitable for 1 phase each 1 1150.00 1150.00
ELCB /DP Isolator as incommer.
ELEC-2.10.1-d Supply of 40-63A 10KA DP MCB, C/D Curve ISI Mark. each 1 875.00 875.00
ELEC-2.10.1-a 10 kA - 6-32A range SP MCBs each 8 180.00 1440.00
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 0.50 555.00 277.50
ELEC-8.1.76 Semi Skilled Electrician day 1.00 440.00 440.00
ELEC-8.1.77 Helpers day 1.00 440.00 440.00
Sundries such as TW Plugs, Screws Cement etc, LS 7.00
Rate per each 4629.50
2. For concealing, add the following:
ELEC-8.1.76 a 1No. Semi skilled mason day 1.00 440.00 440.00
ELEC-8.4.11 b 1/4 bag cement KG 12.50 8.00 100.00
Rate per each 5,169.50

4 way TPN Type DB:-


DATA 4.4.8
Supply and fixing of TPN 4 way distribution board IP-43 (8+12 Module) Protection as per IS:13032 with
provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet Steel
enclosure with 63A 4 pole MCB as incomer and 12 No of 6 to 32 Amps single pole, 10 KA breaking
capacity 'C' Curve MCB outgoings including making connections etc., complete concealing in wall.
Makes : Legrand(Ekinox 3) / Schneider.

a) Material
ELEC-2.13.4-c Supply of 4 Way TPN DB Horizontal with IP 43 Protection Nos 1 2500.00 2500.00
as per IS:13032 and suitable for 12 Nos S.P. out goings and
for 1 No 4 pole Incommer
ELEC-2.10.1-h 63A FP MCB, C/D Curve ISI Mark. Nos 1 1750.00 1750.00
ELEC-2.10.1-a 10kA, 6 to 32A SP MCBs. Nos 12 180.00 2160.00
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 1 555.00 555.00
ELEC-8.1.76 Semi Skilled Electrician day 1 440.00 440.00
2. For concealing, add the following:
ELEC-8.1.77 a Semi skilled mason day 1 440.00 440
ELEC-8.4.11 b bag cement day 12.5 8.00 100
Sundries such as hardware, cement etc, LS 1 0
Rate per each 7945.00

Earthing
DATA 5.1.1
Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size
specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with
hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal
in layers and all labour charges etc., complete for small quarters.

a) Material
ELEC-8.4.17 Earth Work Excavation of Hard gravel Soil with small cum 0.85 250.00 212.50
boulder for trench 1st step of size 1.5 x 0.6 x 0.9 m
(5'x2'x3')
ELEC-8.4.17 Excavation of Hard disteggrated rocks and boulders for cum 0.90 250.00 225.00
trench 2nd Step of size 1.2 x 0.6 x 1.2 m (Civil SSR)
(4'x2'x4')
25% extra for narrow trench & pit and back filling with 109.38
Sand, Coke, Salt etc., and leveling
ELEC-8.4.15-b 40mm dia 'B' Class G.I pipe Mtr 2.50 420.00 1050.00
ELEC-8.3.6 25 x 6 mm (1"X 1/4") G.I Flat duly drilled 12mm holes (4 Each 1.00 65.00 65.00
Nos) of 200 mm (8") length
ELEC-8.4.18 Drilling of 16 Nos through holes of 12mm dia to G.I pipe Each 16.00 6.00 96.00

ELEC-8.4.19 G.I Nuts, Bolts an Washers Set 4.00 12.00 48.00


ELEC-8.4.20 18" dia hume pipe ring Each 1.00 250.00 250.00
8.1.10 Hard Coke Kg 40.00 20.00 800.00
8.1.11 Salt Kg 20.00 15.00 300.00
b) labour charges for fixing pipe ring and connections Each

ELEC-8.1.76 Semi skilled Electrician Nos 1.00 440.00 440.00


ELEC-8.1.77 Helpers Nos 1.00 440.00 440.00
Sundries 0.91
Rate per each 4036.79

DATA 5.2.5 Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc.,
complete.
a) Material
ELEC-8.3.6 25mm x 6mm G.I Strip 100 M Length (1.18 Kg / Mtr) kg 118 65.00 7670
b) labour charges
ELEC-8.1.75 Skilled Electrician Nos 2 555.00 1110
ELEC-8.1.77 Helper Nos 2 440.00 880
Sundries such as T&P. 6
C) Cost for 100 M 9666.0
Rate per mtr c/100 96.66

DATA 5.2.5 Supply and Run of 50mm x 6mm G.I Strip including cost of all accessories and labour charges etc.,
complete.
a) Material
ELEC-8.3.6 50mm x 6mm G.I Strip 100 M Length (2.398 Kg / Mtr) kg 239.8 65.00 15587
b) labour charges
ELEC-8.1.75 Skilled Electrician Nos 2 555.00 1110
ELEC-8.1.77 Helper Nos 2 440.00 880
Sundries such as T&P. 6
C) Cost for 100 M 17583.0
Rate per mtr c/100 175.83

DATA 5.2.1
Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.
a) Material
ELEC-8.3.6 No.8 SWG G.I wire 100 M Length (0.104 Kg / Mtr) Kg 10.4 65.00 676
ELEC-8.1.4 U' Nails 100Nos 1.5 30.00 45
b) labour charges
ELEC-8.1.77 Helpers day 2 440.00 880
Sundries.
C) Cost for 100 M 1601.00
Rate per mtr= c/100 16.01

FIXTURES
DATA 7.7.4 Supply and transportation of 60W LED HIgh Bay Luminaire with high power COB LED made of pressure
diecast alluminium housing with powder coated,Supply Input voltage 120 - 270 V AC, P.F > 0.90, high
power
LED's having efficacy >95 lumines/watt, System efficacy >95lm/W and junction temprature < 70°C, with
Ingrees protection IP65, IK05, Driver surge protection 4KV,external Surge protection ≥ 5KV with wide/
Narrow beamoptics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum
CRI>70, etc., complete
ELEC-3.8.29 a 60W LED HIgh Bay Luminaire Each 1 8500.00 8500
b) Labour charges
ELEC-8.1.75 Skilled Electrician/carpenter day 0.50 555.00 277.50
ELEC-8.1.76 Semi skilled Electrician / Helper day 0.50 440.00 220.00
Rate per Each 8998.00

DATA 8.2.2
Supply,transportation of 16W/20W, 1600/2000 lumens,T8,1200mm length LED retrofit tube light, input
voltage AC 220 – 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted
cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete
Makes: Phillips / GE / Crompton / Bajaj / VIN.

ELEC-3.8.16 Cost of fitting 1 750.00 750.00


b) Labour charges
ELEC-8.1.75 Skilled Electrician/carpenter day 0.10 555.00 55.50
ELEC-8.1.76 Semi skilled Electrician / Helper day 0.10 440.00 44.00
Rate per each 849.50

DATA 2.1.7 Supply and fixing of mini modular batten holder / slanting holder in lieu of ceiling rose of light point
complete with all connections and all labour charges with 3W to 5W 3000K, AC 160-260V, LED Candel
Lamp (for new installation). LED: Makes : Phillips / Crompton / Bajaj.
Taking Output = each
a) Material
ELEC-1.7.1-n BH/SBH EacH 1 18.00 18.00
ELEC-3.7.7 3W to 5W 3000K, AC 160-260V, LED Candel EacH 1 230.00 230.00
b) Labour charges :
ELEC-8.1.75 Skilled Electrician day 0.05 555.00 27.75
ELEC-8.1.77 Helpers day 0.05 440.00 22.00
Sundries 0.50
Rate per each 298.25
1.7.13 Note : 1. The Cost of Ceiling Rose may be deducted in view of holder. -19

2. Labour Charges proposed for 20 jobs per day


Rate Per Each 279.25

DATA 9.7.2 Supply,transport & fixing of 48" (1200mm) Sweep 5 Star rated AC Ceiling Fan with double ball bearings
with all standard accessories but without Regulator of Makes:- Crompton High Speed Plus / Bajaj
Electra 50 / Havells ES 50 / Orient Energy Star
a) Material
ELEC-5.1.2 Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan each 1.00 2300.00 2300.00

Transportation Charges on Unit Cost 1% 23.00


Rate per Each 2323.00

DATA 9.7.35 Labour charges for fixing of ceiling fan with regulator including transportation, 3 core wire leads etc
complete

a) Material
ELEC-1.5.6 23/0060 twin core wire M 1 9.50 9.50
b) Labour charges.
Fixing of ceiling fan
ELEC-8.1.76 Semi skilled Electrician day 0.125 440.00 55.00
ELEC-8.1.77 Helper day 0.125 440.00 55.00
sundries LS 0.00
Rate per Each 119.50
Note : Labour is Considered for8 jobs / day

DATA 9.7.26 Supply & fixing of Modular Electronic step type regulator for ceiling fan fixing on suitable hot-dip
galvanised box covered with appropriate front plate including cost of all materials and labour charges
etc., complete. Makes: Schneider Zen Celo/Legrand Arteor/MK Blenge
a) Material
ELEC-1.8.1-n Stepped type Electronic regulator M 1.00 360.00 360.00
b) Labour charges.
ELEC-8.1.76 Semi skilled Electrician day 0.10 440.00 44.00
Sundries 2.50
Rate per Each 406.50

DATA 9.7.25 Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted
with matching colour of fan complete

a) Material
ELEC-8.1.21 19/20mm steel tube down rod with bolts & nuts for fan M 1 85.00 85.00
with maching colour.
b) Labour charges for Fixing
ELEC-8.1.77 Helper day 0.1 440.00 44.00
sundries like painting etc LS 4.00
Rate per Each 133.00

DATA 7.1.1 Supply of 1x36/ 40W weather proof flourescent streetlight fitting comprising canopy of sheet Aluminium
housing in stove enamel finish with Electornic ballast, capacitor, tube and etc., complete.
Makes: Phillips / GE / Wipro

a) Material
ELEC-3.1.1 1x40W WP flourscent street light fitting. each 1 1150.00 1150.00
ELEC-3.7.3 Lamp cost of 40W each 1 40.00 40.00
Rate Per Each 1190.00

DATA 7.9.5 Fixing of 40W street light luminaire to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS
flat etc., including giving connections and labour charges etc., complete.
a) Material
ELEC-8.4.15-b 25mm dia G.I pipe light grade M 1 245.00 245.00
ELEC-1.5.6 23/0060 twin core flexible copper cable M 2 9.50 0.19
Pipe bending charges LS LS 25.00
M.S flat and welding charges LS LS 35.00
b) Labour charges
ELEC-8.1.75 Skilled Electrician/carpenter day 0.2 555.00 111.00
ELEC-8.1.78 Mason day 0.2 475.00 95.00
ELEC-8.1.76 Semi skilled Electrician / Helper day 0.2 440.00 88.00
Rate per each 599.19
Note : Labour Charges considered for 5 fixtures / day .

DATA 7.9.5.1 Supply and Transportation of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades etc.,
including giving connections and labour charges etc., complete.
ELEC-5.1.12 12" (300mm) ISI, 900 RPM Heavy duty exhaustfan each 1 2750.00 2750.00
Rate per each 2750.00

DATA 7.9.5.2 Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making
hole, finishing etc., complete
a) Material
ELEC-1.5.6 23/0060 Twin flat wire M 1 9.50 9.50
ELEC-8.4.11 Cement kg 25 8.00 200.00
b) Labour charges.
ELEC-8.1.75 Skilled Electrician day 0.25 555.00 138.75
ELEC-8.1.77 Helper day 0.25 440.00 110.00
ELEC-8.1.78 Mason day 0.25 475.00 118.75
Sundries such as Sand, Bolt, Nuts etc., LS 1 0.35
Rate per Each 577.35

7.9.5.3 Supply and fixing of louver shutter suitable for 12" Exhaust fan including all labour charges etc complete
DATA with connections and colouring matching to the wall with enamel paint.
ELEC-8.4.26-a Material Each 1 150.00 150.00
b) Labour charges.
ELEC-8.1.77 Helper day 0.1 440.00 44.00
Sundries 5

Rate per Each 199.00

U.G CABLES
DATA 7.9.5.4 Supply of the following PVC XLPE armoured cable 1100 V Grade with ISI mark stranded/solid,
aluminimum conductor complete. Make: Polycab / KEI / RPG / Finolex / Havells / V-Guard / Gloster

a) Material
a ELEC-4.1.2-f 4 core, 16 Sq.mm ONE RM 1 135.00 135

Rate Per metre 135.00

b Supply of 6 Sqmm 2 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification
confirming to IS:7098 (Part – I).
ELEC-4.1.2-b 6 Sqmm 2 Core ONE RM 1 85.00 85

Rate Per metre 85.00

DATA 15.6.1
Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 70 Sq,mm on sand cushion covering th

a) Material
ELEC-8.4.17 Excavation of earth 100 x 0.3 X 0.9 m cum 27 250.00 6750.00
ELEC-8.4.13 Cost of bricks 1000 Nos 0.92 4000.00 3680.00
ELEC-8.4.12 Cost of sand cum 6 600.00 3600.00
ELEC-8.4.11 Cement Kg 25 8.00 200.00
ELEC-8.1.27 Cost of cable route indicator each 12 85.00 1020.00
b) Labour charges for laying cable.
ELEC-8.1.85 Man Mazdoor for spreading the sand and back filling the each 2.5
excavated soil. 400.00 1000.00
ELEC-8.1.75 Skilled Electrician day 1 555.00 555.00
ELEC-8.1.77 Helper day 2 440.00 880.00
ELEC-8.1.85 Man Mazdoor for concreting and embedding of cable way indicators
day 2
400.00 800.00
Sundires and Rounding of LS 1 0.00
Rate per 100mts 18485.00
Rate per Each Mtr 185.00

DATA 15.6.3 Labour charges for run of U.G cable up to 400 sq.mm on wall / existing pipe with necessary fixing
arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) for
eath connections for the cables.

a) Material
ELEC-8.1.1 Wooden separators each 148 1.80 266.40
ELEC-8.4.23-c Saddleds of required size 100 nos 2 300.00 600.00
ELEC-1.4.4-a 12mm screws 100 nos 4 60.00 240.00
ELEC-8.3.6 No.10 SWG GI wire kg 7 65.00 455.00
b) Labour charges
ELEC-8.1.75 Skilled Electrician day 1 555.00 555.00
ELEC-8.1.77 Helper day 4 440.00 1760.00
Sundires such as cement,sand etc., 1 34.00 34.00
Total 3910.40
Note : Labour Charges Considered for 100 Mts / day 39.00

CABLE GLANDS:
DATA 15.3.4 Supply and Fixing of single compression brass cable glands for 4 core XLPE armoured cable up to 16.0
Sq.mm with brass washers complete.

a) Material
ELEC-4.1.11 4 Core 16 Sq.mm Each 1 85.00 85
b) Labour charges for fixing glands.
ELEC-8.1.75 Skilled Electrician Day 0.066 555.00 36.63
Sundireis and Rounding of
Rate Per Each 121.63

ALUMINIUM LUGS:
DATA 15.4.3 Supply and fixing of crimping type copper lugs confirming to I.S specifications for cable of 16 Sq.mm
including nuts and bolts with connections.

a) Material
4.1.12-a Upto 16.00 Sq.mm. Each 1 20.00 20.00
b) Labour charges for crimping
ELEC-8.1.76 Semi Skilled Electrician Day 0.013 440.00 5.72
ELEC-8.1.77 Helper Day 0.013 440.00 5.72
Sundries such as bolts and nuts.
Rate Per Each 31.44
Total Termination 153.07
Rate Per Each 153.07

EXTERNAL DATA
DATA ELEC-6.1.6 Fabrication, Transportation and supply of hot-dip No 1 17800 17800
galvanized Octogonal Pole with BSEN - 10025 grade S 355
JO steel plate for shaft, IS 2062 for base plate with door
opening arrangement, including the supply of suitable
boards with bakelite sheet and MCB's as per IS
specification suitable to withstand the wind speed of 180
KMPH for 9 Mtrs height Pole having dimensions Bottom
155 mm,. Top 70mm with 3mm thick, base plate 260 x 260
x 16mm and 4 Nos of M24 x 750 long 'J' bolts along with
template of Makes: Bajaj / Valmont /TRANSRAIL.

Rate Per Each 17800


DATA ELEC-6.1.12 Fabrication, Transportation and supply of 1.50 Mtr Length No 1 1650 1650
Single Arm Bracket made with MS galvanized 40mm /
50mm dia Pipe.

Rate Per Each 1650


DATA ELEC-6.1.31 Foundation and erection charges with special T&P, for Job 1 6300 6300
9Mtrs / 10Mtrs long Octagonal / Conical pole duly erecting
on base plate duly providing 4 Nos foundation bolts with
nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size
M20 cc work vibrated concreting mixing with necessary
steel (15kgs) reinforcement and curing for 7 days as
directed by the field engineers during execution including
excavation of Earth/BT all labour charges and cost and
conveyance of materials etc.complete.

Rate Per Each 6300

DATA ELEC-3.8.23 d Supply and transportation of 60W LED Street light No 1 6700 6700
Luminaire made of pressure diecast alluminium body with
powder coated, having toughned glass cover input voltage
range of 100 to 270 volts AC, power factor > 0.90, high
power LED's having efficacy 120 lumines/watt and junction
temprature < 85 degree centegrade of IP 65 with optics,
total hormonic destortion less than 15% at 110 Volts AC,
driver efficiency >90% etc., complete with 5 years
warranty. a) LUMINAIRE MAKE: SURYA / MIC / BLU / KRIPA
LIGHTS / FORTUNE ART / CAPART/ SEMTRONICS / SYSKA.
b) LED MAKE: PHILIPS LUMILEDS / CREE / NICHIA / OSRAM
/SAMSUNG.

Rate Per Each 6700

DATA ELEC-3.5.2-b Supply of Automatic Street Light Control System with No 1 14600 14600
Optical Sensor, Low volatage / High voltage trip and reset,
operating voltage 150 - 280V AC per Phase, 50 HZ with
suitable SMC enclousure of IP 54 protection, MCBs and
contactor suitable to control the load of 8 KW of Three
phase load with necessary clamping arrangements.Make:
Swadeep Nature Switch or its equivalent.

DATA ELEC-9.4.8 Supply and fixing of ISI mark (IS:15683) Mono ammonium No 1 5200 5200
phosphate powder 90 (MAP) 6 Kg Fire extinguisher, stored
pressure type, pressure gauge, gross wt. 9.4 kg, empty
wt.3.4 kg, Discharge time minimum 13 sec, controllable
discharge mechanism, range min. 4 mts applicable on
classes A,B, C & electrically started fire, A rating - 4 A, B
rating -34 B, can construction: Deep drawn and Co2 mig
welding, Valve construction: Forging & Machining, internal
coating of can: Epoxy powder coating, External coating of
Can:Epoxy polyster powder coating, sheet metal
thickness:1.60mm, Helium leak detection tested with 5
years warranty Including transportation, all taxes and all
labour charges etc complete.
Makes: Safex / Kenex / Bharat / Reliance.

Rate Per Each 5200

S-ar putea să vă placă și