Sunteți pe pagina 1din 5

Curriculum Vitae

SHUBHAM PRATAP SINGH


Vill : Gopalpur
Post : Hasayan
Distt : Hathras(U.P.)
Pin No. : 204212
Mob. No. +91 8433013484
E-mail- mshubhampratapsingh115@gmail.com

CAREER OBJECTIVE:

To pursue a career in the field of Embedded & Robotics with an opportunity to


innovate new product by working with a growing organization. I enjoy to work with
learning attitude and to take responsibilities, I always like to work with team sprit for
the growth of organization as well as to grow professionally and personally.

EDUCATION:

Class Board/University Year Division/Percentage

Class 10 CBSE (J.N.V. Hathras) 2012 Ist, (92%)

Class 12 CBSE (J.N.V. Hathras) 2014 Ist, (76%)

B.Tech Inderprastha Engineering 2014-18 Ist, (80%)


College,Ghaziabad,U.P

EEPERIENCE:
I have completed 8 month training on Embedded System & PCB Design from Pine
Training Academy.
I have 1 year experience in Jaquar Lighting and completed lots of Smart Lighting
projects.
I also worked in a defence based company ( Veda Defence System ) for a period of 10
months in which I have worked as Embedded developer, where I have worked over
an Indian Air Force Project .

PROFILE SUMMARY:

Have good knowledge of digital electronics , electronic devices and hands on


experience with Texas-Instrumentation kit for analog circuit analysis like Op-amp
configuration, HPF, LPF, multivibrators, etc.
Have good knowledge of C and Basic knowledge of C++, core java, Python language.
I have worked on Linux OS.
Worked on Xilinx to practically analyse digital circuit like SR latch-flip flop, JK flip flop
and T-flip flop.
I have good knowledge of Machine learning, ROS (Robot Operating System ), Robotics
& kinematics.
I have good command over concepts of Physics & Maths that help me to workout with
practical problem faced during implementation of any idea or project.

TECHNICAL SKILL:

Embedded: Have good knowledge of embedded C programming and interfacing of


UART, I2C, SPI, PWM, TIMER, ADC, etc. with TI, Ranesas & Microchip controllers.
PCB design: Eagle Schematic design, Footprint & library design & routing.
OPERATING SYSTEM: Ubuntu 16.4
MATLAB : Basic MATLAB simulink, complete a project using MATLAB for image
processing also worked with Alexnet neural network in MATLAB, which classify
objects in an image using deep learning.
ROBOTICS: Have knowledge of following topics : space & transform, robot arm
forward and reverse kinematics, differential kinematics, Cartesian control, motion
planning.
MACHINE LEARNING & DATA SCIENCE : Basics of machine learning , Pandas,
Matplotlib, Numpy, SVM, Decision Tree, Web-scraping, kNN, Natural Language Tool
Kit : BOW, TF-IDF, Word2Vec, etc .
ROBOT OPERATING SYSTEM: Working on project with ROS, which is a leading
software for Robotics.

PROJECTS :

B.Tech Projects :
SELF DRIVING CAR-

Objective: The main aim of this project is to make autonomous car that can be used
to extract information from life threatening region (like terrorist area), it uses image
processing technology to extract information from surrounding object.
Technology: Computer Vision.
Software Used: ROS, Ubuntu-Mate.
Hardware Used: Raspberry Pi, Camera, Ultrasonic sensor, Motors.
Programming language: Python.

FINGER CONTROLLED MOUSE-

Objective: To control click and movements of mouse in the desktop with fingers
using image processing.
Software Used: MATLAB.
Hardware Used: Webcam, colour marker.
Technology Used: Image Processing.
Embedded Training Projects :

PERIPHERAL INTERFACE :
Objective: In this project I had interface with most of the peripheral like A/D , D/A,
EEPROM, also worked on different communication protocol like UART, I2C, SPI and also
work with timer, counter and other applications with Seven Segment.
Hardware Used: PIC18f4550, Seven Segment display.
Software Used : MPLAB

KBC PROTOTYPE :
Objective : In this project I used C Language on Linux platform to make a
prototype of “ KAUN BANEGA KARORAPATI” (KBC) in this project basically I use
different data structure using C like Structure, Union. Maloc, etc.

Veda Defence Projects :

IAF Swarm Drone Project:


Objective : In this project we have Successfully made and fly 10 Drones with
Swarm technology which travel 10 km from both sides and our team won Mehar
Baba Prize .
In this project we also used Image recognition technology to find out destination point
& to perform Swarm Phenomena.
Software Used : Ground Flight Control.
Hardware Used : Drone Equipments ( Like motors, frame, Telegrid, Cube (flight
controller) , Power control board, etc.).
Technology Used : Swarm , Image Processing , Open Source flight control software.

Jaquar Lighting Projects:

Smart Lights with RF, BLE:


 Worked on 2*2 light panels, 18 watt tube light which are controlled with RF remote
and Mobile App through Telink BLE module.
 It can produce 10 combinations of warm & cool white colour.
 We can also control its brightness and turn ON/Off through remote & mobile App.

Smart Lights with Light Sensor:


 Worked on 2*2 light panel & 25 watt street light with light sensor.
 Hardware: Ranesas controller (RL78/i1a) with light sensor (ISL29023).
 Here brightness of these light change to maintain a fix lux level i.e if light is under
dark area then it give more brightness then another area with much brighten area
around the light.
 We can also change lux level that light should maintain.

Smart Lights with Motion Sensor:


 Products are 2*2 light panel (36 watts), 22 watt Tube light, Stella (9, 15 & 22 watt),
and 40 watt Pride light.
 There are two types of motion sensors which are PIR (Passive Infrared Sensor) &
Microwave Sensor.
 Hardware: Ranesas controller (RL78/i1a), PIR Motion Sensors (EKMC1601111 &
EKMC1603111) & Microwave Sensors (HIH101D, HIH102S).
 Whenever there is a movement around the light it will turn ON with smooth
transition and there is no movement till 30 sec then light will automatically turn OFF
with smooth transition.

Smart Lights with Gesture Control:


 Worked on 2*2 light panel & 18 watt tube light who’s switching & Brightness can be
controlled just with hand movements.
 Hardware: Spark fun RGB and Gesture Sensor (APDS-9960) to control colour,
brightness & to switch ON/OFF.
 RF transmitter & receiver are used for communication between gesture sensor and
light.

IOT based Projects:

Smart Light with Lora WAN:


 Lora WAN stands for Long Range Wide Area Network as its range from 1-10Km.
 Worked on 25 & 70 watt street light which can be control from anywhere in the
world using internet and Lora WAN gateway.
 Main components are dimmable street light, TI microcontroller, Ai-Thinker Lora
WAN module, gateway, Lora WAN network & GUI.

Smart Light with WIFI & BLE:


 Worked on RGB bulb (9 W) & RGB strip Light which emits infinite colour
combinations.
 Hardware: WIFI & BLE to control colour and brightness which can be controlled
from any remote location.

Smart Bathtub:
 Aim of this project is to develop a smart bathtub which have features like Air
massage, Chromo therapy and automatic sanitizer inlet control, touch keypad, etc.
 Main components are water motor, air blower, RGB light, Sanitizer system, water
and sanitizer sensor, touch keypad, bathtub & main control board.
 We have developed a touch keypad with TI captivate software development tool
with MSP430FR2533 controller.
 Keypad have Functions like water motor ON/OFF, Air Blower ON/OFF with 10 steps
of speed regulation for Air therapy, 10 Combinations of RGB colours for chromo
therapy, Sanitizer ON/OFF.
 We have developed water level sensor to automatically turn OFF in the absence of
water, it comprises of comparator circuit along with D-flip flop.

Auto Flasher System:


 Auto flasher consists of IR receiver and transmitter circuit along with H-bridge IC to
operate Solenoid valve.
 MSP430FR2311 microcontroller used for this project.
 Range and timer Settings of IR sensor can be modulated.
Homeopathy Rubrics Data Analysis :

 Language Used : Python.


 Tool Used : Pandas, Web-scraping.
In this project I have extract data from Wiki and transform that data into a useful format
that can help for a homeopath to find rubrics of a patient and give medicine based on it.

PERSONAL DETAILS:

Father’s name : Shri Budh Pal Singh


Date of birth : 01 July 1996
Marital Status : Married
Nationality : Indian
Language Known : English, Hindi.
Religion : Hindu

DECLARATION
My ability to take clear, decisive action will allow me to make an impact at your
prestigious organization from day one. I am confident that an interview would
further demonstrate my suitability for this opportunity.
I hereby declare that all the information furnished above is true and to the best of
my knowledge.

Place -
Date -
(Shubham Pratap Singh)

S-ar putea să vă placă și