Documente Academic
Documente Profesional
Documente Cultură
Aims:
To set the drive for Variable Torque.
Narrative:
As the drive is to be used with a pump application, the nature of the load is such
that the drive should be set for Variable Torque.
Notes:
Instructions:
Follow the exercises given to you, setting the parameters to configure
the drive suitable for use within the system.
1 Consider the parameters to be used to set the drive for Variable Torque
application.
Parameters:
Settings:
Modifications/Notes
Settings:
P0500 = P1300 =
Modifications/Notes:
On 11kW and above, setting P0205 will increase the power output of the drive,
reduce the overload capability and set P0500 and P1300 automatically
3 Consider any modifications that you may make to improve your settings.
List them in the box provided.
Modifications/Notes:
On 11kW and above, setting P0205 will increase the power output of the drive,
reduce the overload capability and set P0500 and P1300 automatically