Documente Academic
Documente Profesional
Documente Cultură
Table of Contents
1. For the following operational amplifier circuits, write a general expression for the output voltage in terms of the input
voltages and the values of the various resistors.
b.
2. Find a resistor color code chart and insert it into your electronic lab notebook. You will also need the pinout diagram
for the TL081 operational amplifier.
3. Look up and record in your electronic lab notebook the molar masses, solubilities in water (at 20 or 25 °C), and
enthalpies of solution of the salts (ammonium chloride, calcium chloride, and sodium chloride) available for this
experiment. Note whether the process of each salt dissolving in water is endothermic or exothermic.
4. If 1 gram of calcium chloride is dissolved in 100 mL of pure water, what temperature change will be observed?
Stephen Mang Jan 03, 2020 @09:27 AM PST
We will build the circuit with a given combination of Rf and R1 and test it using five input voltages (V1), measuring Vout each time. Then we will use
two other combinations of Rf and R1 and perform the same tests. We will compare the expected gain (based on Rf and R1) to the actual gain (based
on V1 and Vout) in each case.
DC Circuits Lab/Pre-Lab, Data, and Observations 3 of 3
Stephen Mang Jan 03, 2020 @09:27 AM PST
A B C D E
1 Circuit # Rf (kOhms) R1 (kOhms) Vin (Volts) Vout (Volts) Actu
21 1000 100
31 1000 100
41 1000 100
51 1000 100
61 1000 100
72
82
92
10 2
11 2
12 3
13 3
14 3
15 3
16 3
17
Spreadsheet 0
Stephen Mang Jan 03, 2020 @09:28 AM PST
(you can certainly replace the spreadsheet above with your own embedded Google Sheet, they work a lot better)