Sunteți pe pagina 1din 10

PHILIPPINE RURAL DEVE

Sub-Project Title: Construction of Farm Machinery Shed


Location: Barangay Tabacao, Talavera, Nueva Ecija

MINIMUM MATERIALS TESTING RE

Original POW Estimated Test Min. No. of


Item No. Description Unit
Quantity Direct Cost (P) Required Test Req'd.
(1) (2) (3) (4) (5) (6) (7)

403 Metal Structure Kgs


Angle Bars 2,131.12
Plain Round Bar w/ nuts & lock washers 43.20
C- Purlins 538.72
Steel Plate 140.00
Cross Bracing w/ std. turn buckles 76.80
Anchor Bolts 13.00

704 Masonry Works sq.m. 220.00


CHB pcs 2,748.00
Portland Cement bags 354.00 Qc 1
MC 1
Washed Sand cu.m 32.98 Q4 1
G 1
Steel Bars kgs. 1,525.74 Q7 1
MC 1
803 Structure Excavation cu.m. 73.00 1.00 G 1
1.00 P 1
1.00 C 1
804 Embankment cu.m. 597.43 - G 1
- P 1
- C 1
1.00 FDT 1
900 Reinforced Concrete cu.m. 81.00
a.)Cement bags 738.00 PEC 1
MC
Qc 1
b.) Fine Aggregates cu.m. 41.00 1.00 Q4 1
6.00 G 1
c.) Coarse Aggregates cu.m 81.00 1.00 Q6 1
11.00 G 1
d.) Water 1.00 PEC 1
1.00 Qw 1
e.)Joint Filler 1.00 PEC
1
1.00 MC
f.)Steel Bars kgs 4,856.75 3.00 Q7 1
1.00 MC
TOTAL COST

The number of tests indicated here in were based on the minimum test requirements from one source. In the event that the materials were taken from various sources, each material should be tes
of test should be on the same basis as the minimum requirements.
Submitted by: Reviewed By: Recommending Approval

MAC ARTHUR S. YAP SERAFIN SANTOS


PROJECT MANAGER (CONTRACTOR) PROVINCIAL ENGINEER PPMIU HEAD
INFRASTRUCTURE DEV'T HEAD

LEGEND
IR - Inspection Report Q1 - Quality Test (Grading, Plasticity and Abrasion)
PEC - Project Engineer Certificate Q2 - Quality Test (Grading, Plasticity, Abrasion, Stripp
G - Grading Q3 - Quality Test (Grading, Elutriation (Wash), Bulk Sp
P - Plasticity Test Unit Weight, % Clay Lumps and Shale)
C - Laboratory Compaction Test Q4 - Quality Test (Grading Elutriation (Wash), Bulk Sp
FDT - Field Density Test Q5 - Quality Test (Grading, Bulk Specific Gravity, Abso
CBR - California Bearing Ratio Q6 - Quality Test (Grading, Bulk Specific Gravity, Abso
F - Fractured Face Q7 - Quality Test (Bending, Tension and Chemical Ana
E - Extraction Qw - Physical Test for Water
R - Retained Stability Index Qp - Quality Test for Paint
Sty - Stability Ql - Quality Test for Hydrated Lime
Ft - Flexural Strength Test for Concrete Beam Sample Qs - Quality Test for Asphalt (Bituminous) Materials
Ct - Compressive Strength Test on Concrete Cylinder Sample Qc - Quality Test for Cement (Chemical or Physical)
St - Slump Test Qm - Quality Test for other Materials (Bearing Pad, P
Ta - Thickness Determination (Core Drilling and Compression Test) for Asphalt MC - Mill Test Certificate
Tc - Thickness Determination (Core Drilling and Compression Test) for PCC Pavement
PINE RURAL DEVELOPMENT PROJECT

ERIALS TESTING REQUIREMENT

Sample Test Total Test Test Amount


REMARKS
Requirements Required Unit Cost of Test
(8) (9) (10) (11) (12)
= (4)/(8) x (7) = (9) x (10)

for every 2000 bags 1 apply Qc if source is questionable


for every delivery 1
for every 1500 cu m. 1 apply Q3 test, if source not yet tested
for every 75 cu m. 1 Additional test (G) if delivered materials are inconsistent
for every 10000 kg. 1 1 sample per size
for every delivery 1 Mill Test Certficate
1 -
for every 1500 cu m. 1 - if materials are to be incorporated in the work
1 -
1 -
for every 1500 cu m. 1 -
1 -
for every 500 sq.m. 6 - Layer placed not exceeding 200mm in loose measurement

for every delivery 1 -


Project Engineer Certificate or Mill Certificate

for every 2000 bags 1 apply Qc if source is questionable or per concrete trial mix result
for every 1500 cu m. 1 apply Q3 test, if source not yet tested
for every 75 cu m. 1 Additional test (G) if delivered materials are inconsistent
for every 1500 cu m. 1 apply Q5 test, if source not yet tested
for every 75 cu m. 1 Additional test (G) if delivered materials are inconsistent
for the whole work 1 Inspection Report or Qw if source is questionable
for the whole work 1
-
for every Inspection Report or Mill Test Certificate

for every 10000 kg 1 - Dowels


for every delivery

sources, each material should be tested separately a number


Recommending Approval Approved By: cc: PSO/NPCO

SERAFIN SANTOS AURELIO M. UMALI


PPMIU HEAD GOVERNOR

(Grading, Plasticity and Abrasion)


(Grading, Plasticity, Abrasion, Stripping and Bulk Specific Gravity)
(Grading, Elutriation (Wash), Bulk Specific Gravity, Absorption, Mortar Strength, Soundness, Organic Impurities,
it Weight, % Clay Lumps and Shale)
(Grading Elutriation (Wash), Bulk Specific Gravity, Absorption and Mortar Strength)
(Grading, Bulk Specific Gravity, Absorption, Abrasion, Soundness and Unit Weight)
(Grading, Bulk Specific Gravity, Absorption and Abrasion)
(Bending, Tension and Chemical Analysis) for Steel Bar

for Hydrated Lime


for Asphalt (Bituminous) Materials
for Cement (Chemical or Physical)
st for other Materials (Bearing Pad, Premolded Filler, Joint Filler, etc.)
1½"ø G.I. Pipe Sch. 40 Top & Bottom
1½"ø G.I. Pipe Sch. 40 Web Member
¼x2x2x 6.0m AB Top & Bottom
¼x1½x1½ Web Member
¼x2x2x 6.0m AB Cleats
2x6 C-Purlins
2x6 C-Purlins Fascia Board Painted
16mmø x 7.5m Cross Bracing w/ std. turn buckles
12mmØ x 0.65m Round Bar Sagrod w/ nuts & lock washer
16mmø x 250mm Anchor Bolts
10mm thk. Base Plate (1.20mx2.40mx 10mm)
PHILIPPINE RURAL DEVE
Sub-Project Title: Construction of Ampalaya Packing Building and Ground Impro
Location: Barangay Porais, San Jose City, Nueva Ecija

MINIMUM MATERIALS TESTING RE

Original POW Estimated Test Min. No. of


Item No. Description Unit
Quantity Direct Cost (P) Required Test Req'd.
(1) (2) (3) (4) (5) (6) (7)

403 Metal Structure Kgs


Angle Bars 2,131.12
Plain Round Bar w/ nuts & lock washers 43.20
C- Purlins 538.72
Steel Plate 140.00
Cross Bracing w/ std. turn buckles 76.80
Anchor Bolts 13.00

704 Masonry Works sq.m. 220.00


CHB pcs 2,748.00
Portland Cement bags 354.00 Qc 1
MC 1
Washed Sand cu.m 32.98 Q4 1
G 1
Steel Bars kgs. 1,525.74 Q7 1
MC 1
803 Structure Excavation cu.m. 73.00 1.00 G 1
1.00 P 1
1.00 C 1
804 Embankment cu.m. 597.43 - G 1
- P 1
- C 1
1.00 FDT 1
900 Reinforced Concrete cu.m. 81.00
a.)Cement bags 738.00 PEC 1
MC
Qc 1
b.) Fine Aggregates cu.m. 41.00 1.00 Q4 1
6.00 G 1
c.) Coarse Aggregates cu.m 81.00 1.00 Q6 1
11.00 G 1
d.) Water 1.00 PEC 1
1.00 Qw 1
e.)Joint Filler 1.00 PEC
1
1.00 MC
f.)Steel Bars kgs 4,856.75 3.00 Q7 1
1.00 MC
TOTAL COST

The number of tests indicated here in were based on the minimum test requirements from one source. In the event that the materials were taken from various sources, each material should be tes
of test should be on the same basis as the minimum requirements.
Submitted by: Reviewed By: Recommending Approval

MAC ARTHUR S. YAP SERAFIN SANTOS


PROJECT MANAGER (CONTRACTOR) PROVINCIAL ENGINEER PPMIU HEAD
INFRASTRUCTURE DEV'T HEAD

LEGEND
IR - Inspection Report Q1 - Quality Test (Grading, Plasticity and Abrasion)
PEC - Project Engineer Certificate Q2 - Quality Test (Grading, Plasticity, Abrasion, Stripp
G - Grading Q3 - Quality Test (Grading, Elutriation (Wash), Bulk Sp
P - Plasticity Test Unit Weight, % Clay Lumps and Shale)
C - Laboratory Compaction Test Q4 - Quality Test (Grading Elutriation (Wash), Bulk Sp
FDT - Field Density Test Q5 - Quality Test (Grading, Bulk Specific Gravity, Abso
CBR - California Bearing Ratio Q6 - Quality Test (Grading, Bulk Specific Gravity, Abso
F - Fractured Face Q7 - Quality Test (Bending, Tension and Chemical Ana
E - Extraction Qw - Physical Test for Water
R - Retained Stability Index Qp - Quality Test for Paint
Sty - Stability Ql - Quality Test for Hydrated Lime
Ft - Flexural Strength Test for Concrete Beam Sample Qs - Quality Test for Asphalt (Bituminous) Materials
Ct - Compressive Strength Test on Concrete Cylinder Sample Qc - Quality Test for Cement (Chemical or Physical)
St - Slump Test Qm - Quality Test for other Materials (Bearing Pad, P
Ta - Thickness Determination (Core Drilling and Compression Test) for Asphalt MC - Mill Test Certificate
Tc - Thickness Determination (Core Drilling and Compression Test) for PCC Pavement
PINE RURAL DEVELOPMENT PROJECT
ding and Ground Improvement

ERIALS TESTING REQUIREMENT

Sample Test Total Test Test Amount


REMARKS
Requirements Required Unit Cost of Test
(8) (9) (10) (11) (12)
= (4)/(8) x (7) = (9) x (10)

for every 2000 bags 1 apply Qc if source is questionable


for every delivery 1
for every 1500 cu m. 1 apply Q3 test, if source not yet tested
for every 75 cu m. 1 Additional test (G) if delivered materials are inconsistent
for every 10000 kg. 1 1 sample per size
for every delivery 1 Mill Test Certficate
1 -
for every 1500 cu m. 1 - if materials are to be incorporated in the work
1 -
1 -
for every 1500 cu m. 1 -
1 -
for every 500 sq.m. 6 - Layer placed not exceeding 200mm in loose measurement

for every delivery 1 -


Project Engineer Certificate or Mill Certificate

for every 2000 bags 1 apply Qc if source is questionable or per concrete trial mix result
for every 1500 cu m. 1 apply Q3 test, if source not yet tested
for every 75 cu m. 1 Additional test (G) if delivered materials are inconsistent
for every 1500 cu m. 1 apply Q5 test, if source not yet tested
for every 75 cu m. 1 Additional test (G) if delivered materials are inconsistent
for the whole work 1 Inspection Report or Qw if source is questionable
for the whole work 1
-
for every Inspection Report or Mill Test Certificate

for every 10000 kg 1 - Dowels


for every delivery

sources, each material should be tested separately a number


Recommending Approval Approved By: cc: PSO/NPCO

SERAFIN SANTOS AURELIO M. UMALI


PPMIU HEAD GOVERNOR

(Grading, Plasticity and Abrasion)


(Grading, Plasticity, Abrasion, Stripping and Bulk Specific Gravity)
(Grading, Elutriation (Wash), Bulk Specific Gravity, Absorption, Mortar Strength, Soundness, Organic Impurities,
it Weight, % Clay Lumps and Shale)
(Grading Elutriation (Wash), Bulk Specific Gravity, Absorption and Mortar Strength)
(Grading, Bulk Specific Gravity, Absorption, Abrasion, Soundness and Unit Weight)
(Grading, Bulk Specific Gravity, Absorption and Abrasion)
(Bending, Tension and Chemical Analysis) for Steel Bar

for Hydrated Lime


for Asphalt (Bituminous) Materials
for Cement (Chemical or Physical)
st for other Materials (Bearing Pad, Premolded Filler, Joint Filler, etc.)
1½"ø G.I. Pipe Sch. 40 Top & Bottom
1½"ø G.I. Pipe Sch. 40 Web Member
¼x2x2x 6.0m AB Top & Bottom
¼x1½x1½ Web Member
¼x2x2x 6.0m AB Cleats
2x6 C-Purlins
2x6 C-Purlins Fascia Board Painted
16mmø x 7.5m Cross Bracing w/ std. turn buckles
12mmØ x 0.65m Round Bar Sagrod w/ nuts & lock washer
16mmø x 250mm Anchor Bolts
10mm thk. Base Plate (1.20mx2.40mx 10mm)

S-ar putea să vă placă și