Documente Academic
Documente Profesional
Documente Cultură
The present document was valid at the time of print. A later version may be available online
Preliminary work
Preliminary work
Caution
Hot components
Risk of burns
4. The electronic adjuster must be removed for the bar ignition module for cylinder 5.
https://techinfo2.porsche.com/PAGInfosystem/VFModuleManager?Type=Navigation&Pr... 10/23/2012
Removing and installing bar ignition module - Turbo Page 2 of 3
1. Disconnect and pull off the cable plug -2- on the bar ignition module.
1.3. Turn the bar ignition module slightly in order to remove it if necessary.
1.1. Fit and tighten fastening screw (internal Torx T30, M6 x 16) -3- .
Subsequent work
https://techinfo2.porsche.com/PAGInfosystem/VFModuleManager?Type=Navigation&Pr... 10/23/2012
Removing and installing bar ignition module - Turbo Page 3 of 3
Subsequent work
2. After removing the bar ignition module for cylinder 5: Install electronic adjuster.
997420, 997421, 997450, 997451, 997630, 997631, 997650, 997651, 997470, 997471, 997670, 997671
https://techinfo2.porsche.com/PAGInfosystem/VFModuleManager?Type=Navigation&Pr... 10/23/2012