Documente Academic
Documente Profesional
Documente Cultură
GEIUB
The GEIUB is the GSM E1/T1 Interface Unit for the Abis interface. It can be installed in slots 18-27 in the GMPS/GEPS. The G
GEIUP
The GEIUP is the GSM E1/T1 Interface Unit for the Pb interface. It can be installed in slots 14-15 in the GMPS/GEPS. The GEI
GEIUT
The GEIUT is the GSM E1/T1 Interface Unit for the Ater interface. It can be installed in slots 16-17 in the GMPS/GEPS and in
GGCU
The GGCU is the general clock unit of the BSC. Two GGCUs should be installed in slots 12-13 in the GMPS and should work in
GOIUA
The GOIUA is the GSM Optic Interface Unit for the A interface. It can be installed in slots 18-25 in the GMPS/GEPS/GTCS. Th
GOIUB
The GOIUB is the GSM Optic Interface Unit for the Abis interface. It can be installed in slots 18-27 in the GMPS/GEPS. The G
GOIUP
The GOIUP is the GSM Optic Interface Unit for the Pb interface. It can be installed in slots 14-15 in the GMPS/GEPS. The GOI
GOIUT
The GOIUT is the GSM Optic Interface Unit for the Ater interface. It can be installed in slots 16-17 in the GMPS/GEPS and in
GOMU
This describes the GSM Operation and Maintenance Unit (GOMU). It serves as the server in the BSC. It can be installed in slo
GSCU
The GSCU is the GSM Switching and Control Unit. It is installed in slots 6-7 in the GMPS/GEPS/GTCS. The GSCU is configured
GTNU
The GTNU is the GSM TDM switching network unit in the BSC. It is installed in slots 4-5 in the GMPS/GEPS/GTCS. The GTNU
GXPUM
The GXPUM is the GSM eXtensible Processing Unit for Main service in the BSC. It can be installed in slots 0-1 in the GMPS/G
GXPUT
The GXPUT is the GSM eXtensible Processing Unit for Transmission in the BSC and processes signals according to the LAPD p
GXPUI
The GXPUI is the GSM eXtensible Processing Unit for Computation service in the BSC and implements the IBCA algorithm. It
GFGUA
The GFGUA is the GSM Fast ethernet and Gigabit ethernet Unit for the A interface. It can be installed in slots 18-27 in the GM
GFGUB
The GFGUB is the GSM Fast ethernet and Gigabit ethernet Unit for the Abis interface. It can be installed in slots 18-27 in the
GFGUG
The GFGUG is the GSM Fast ethernet and Gigabit ethernet Unit for the Gb interface. It can be installed in slots 14-15 in the G
GOGUA
The GOGUA is the GSM Optic Gigabit ethernet Unit for the A interface. It can be installed in slots 18-27 in the GMPS/GEPS. W
GOGUB
The GOGUB is the GSM Optic Gigabit ethernet Unit for the Abis interface. It can be installed in slots 18-27 in the GMPS/GEP
GEHUB
The GEHUB is the GSM E1/T1 High level Data Link Control Unit for the Abis interface. It can be installed in slots 18-27 in the
GEPUG
The GEPUG is the GSM E1/T1 Packet Unit for the Gb interface. It can be installed in slots 14-15 in the GMPS/GEPS. The GEPU
GDPUC
The GDPUC is the CS service processing unit in the BSC. When E1/T1 interface boards are installed in the GTCS, the GDPUC c
GDPUX
The GDPUX is the GSM Data Processing Unit for eXtensible services. It can be installed in slots 8-11 in the GMPS; slots 0-3, 8
GDPUP
The GDPUP is the GSM Data Processing Unit for PS services. It can be installed in slots 8-13 in the GMPS/GEPS.
MDMC
The MDMC is the power monitoring communication board for the BSC common power distribution box. It is configured in th
PAMU
The PAMU is the power monitoring communication board for the BSC high-power distribution box. It is configured in the po
PFCU
The PFCU is the fan control unit. It is installed in the front of a fan box. Each fan box must be configured with one PFCU.
PFCB
The PFCB is the fan control board. It is installed in the front of a fan box. Each fan box must be configured with one PFCB.
WOPB
The WOPB is the overvoltage protection board in the BSC. It is placed in the power distribution box. Each Common power d
he GMPS/GEPS/GTCS. The GEIUA can be configured in pairs and work in active/standby mode.
n the GMPS/GEPS. The GEIUB can be configured in pairs and work in active/standby mode.
the GMPS/GEPS. The GEIUP can be configured in pairs and work in active/standby mode.
n the GMPS/GEPS and in slots 14-17 in the GTCS. The GEIUT can be configured in pairs and work in active/standby mode.
he GMPS/GEPS/GTCS. The GOIUA can be configured in pairs and work in active/standby mode.
n the GMPS/GEPS. The GOIUB can be configured in pairs and work in active/standby mode.
the GMPS/GEPS. The GOIUP can be configured in pairs and work in active/standby mode.
n the GMPS/GEPS and in slots 14-17 in the GTCS. The GOIUT can be configured in pairs and work in active/standby mode.
C. It can be installed in slots 20-23 in the GMPS and work in active/standby mode.
s according to the LAPD protocol and SS7 MTP3 protocol. When the number of TRXs to be supported by the GMPS/GEPS is greater than 25
nts the IBCA algorithm. It can be configured in slots 2-3 in the GMPS/GEPS and does not work in active/standby mode.
ed in slots 18-27 in the GMPS/GEPS. If the BSC need not process packet services, the GFGUA can be installed in slots 14-15. The GFGUA can
talled in slots 18-27 in the GMPS/GEPS. If the BSC need not process packet services, the GFGUB can be installed in slots 14-15. The GFGUB
alled in slots 14-15 in the GMPS/GEPS. The GFGUG can work in active/standby mode and work independently.
8-27 in the GMPS/GEPS. When the BSC need not process packet services, the GOGUA can also be installed in slots 14-15. The GOGUA can
s 18-27 in the GMPS/GEPS. When the BSC need not process packet services, the GOGUB can also be installed in slots 14-15. The GOGUB ca
alled in slots 18-27 in the GMPS/GEPS. When the BSC need not process packet services, the GEHUB can also be installed in slots 14-15. The
he GMPS/GEPS. The GEPUG can work in active/standby mode and work independently.
in the GTCS, the GDPUC can be installed in slots 9 to 13. When STM-1 interface boards are installed in the GTCS, the GDPUC can be installe
1 in the GMPS; slots 0-3, 8-13, and 14-27 in the GEPS; and slots 0-3, 8-13 in the GTCS.
GMPS/GEPS.
n box. It is configured in the power distribution box at the top of the GBCR/GBSR. Each power distribution box should be configured with o
. It is configured in the power distribution box at the top of the GBCR/GBSR. Each power distribution box should be configured with one PA
x. Each Common power distribution box should be configured with one WOPB.
PS/GEPS is greater than 256, the GXPUT can be installed in slots 2-3 in the GMPS/GEPS and work in active/standby mode.
ots 14-15. The GFGUA can work in active/standby mode and work independently.
n slots 14-15. The GFGUB can work in active/standby mode and work independently.
s 14-15. The GOGUA can work in active/standby mode and work independently.
lots 14-15. The GOGUB can work in active/standby mode and work independently.
nstalled in slots 14-15. The GEHUB can work in active/standby mode and work independently.