Documente Academic
Documente Profesional
Documente Cultură
AUGUST 2019
SUMMARY
SUBMITTED BY:
_________________________________________________
Contractor's Name and Authorized Signatory
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
PRELIMINARIES - -
- -
CLIENT’S REQUIREMENT - -
- -
Site Accommodation - -
- -
A The Contractor shall allow for providing and - -
maintaining a suitable offices for the Client’s staff and - -
the Client’s Consultants plus a separate conference - -
room and a toilet accommodation. - -
- -
B The Contractor shall pay all running costs, for the - -
Client’s staff offices, the Project Manager’s offices and - -
the Client’s Consultants offices, the conference room - -
and the toilet accommodation. - -
- -
C All offices, the conference room and toilet - -
accommodation shall be cleaned daily at the - -
Contractor’s expense. - -
- -
Furniture & Equipment - -
- -
D All offices and conference room shall be fitted with - -
desk, filing cabinets, meeting table, shelving, white - -
boards & sufficient chairs and shall be air-conditioned - -
and provided with clean drinking water by the - -
Contractor. - -
- -
E Upon Taking Over, all furniture, fittings and equipment - -
within the above offices and conference room shall - -
become the property of the Client. - -
- -
Telecommunication & IT Services - -
- -
F The Contractor shall provide and maintain a telephone - -
and internet services with sufficient lines to serve the - -
Client’s staff and other Consultants as maybe - -
necessary. - -
- -
G The Contractor shall provide the Client & Consultant’s - -
offices with a photocopier, printers, computers and - -
consumables. - -
- -
Site Records - -
- -
H The Contractor shall submit five (5) copies of an 1.00 lot - -
indexed service manual, which included installation - -
procedures, operating instructions, service and - -
maintenance procedures, control and wiring diagrams - -
and spare parts list. - -
- -
- -
- -
- -
- -
- -
- -
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
- -
MANAGEMENT AND STAFF - -
- -
Project Specific Management and Staff - -
- -
The Contractor shall maintain on a full time basis, the - -
following site personnel:- - -
- -
A A competent & experienced Construction Manager or 14.00 mos 120,000.00 120,000.00 1,680,000.00
Project Manager or Project In-Charge who shall be the - -
overall in charge of the Project - -
- -
B Adequate, qualified and competent Field Engineers 14.00 mos 150,000.00 150,000.00 2,100,000.00
and Field Architects. These engineers/architects shall - -
have a recent experience in the type of scope of works - -
to be carried out under this contract and shall manage - -
and coordinate as necessary on the Contractor’s - -
behalf. - -
- -
C Qualified and competent Quantity Surveyor/Estimator 14.00 mos 45,000.00 45,000.00 630,000.00
- -
D Qualified and competent Planner, capable of planning, 14.00 mos 60,000.00 60,000.00 840,000.00
monitoring the project based on computerized critical - -
path analysis techniques and bar charts - -
- -
E Qualified and competent Auto Cad Operator 14.00 mos 25,000.00 25,000.00 350,000.00
- -
F Qualified and competent Safety Officer 14.00 mos 28,000.00 28,000.00 392,000.00
- -
G Qualified Project Site Nurse 14.00 25,000.00 25,000.00 350,000.00
- -
H Qualified and competent QA/QC Engineer 14.00 mos 45,000.00 45,000.00 630,000.00
- -
I Adequate and qualified Warehousemen 14.00 mos 30,000.00 30,000.00 420,000.00
- -
J Adequate, qualified and competent Survey Team 14.00 mos 80,000.00 80,000.00 1,120,000.00
inclusive of all necessary equipment - -
- -
K Qualified administrative staff, including finance clerk, 14.00 mos 40,000.00 40,000.00 560,000.00
document controller and the like - -
- -
L Any other category of staff that the Contractor 14.00 mos 20,000.00 20,000.00 280,000.00
requires. - -
- -
The Contractor shall provide an organizational chart - -
showing a full and detail list of project supervisory - -
staff including their positions/functions, qualifications, - -
experience and length of employment with the - -
company. - -
- -
- -
- -
- -
- -
- -
- -
To Collection (Php) 9,352,000.00
SITE ESTABLISHMENT - -
- -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Site Accommodation - -
- -
A The Contractor shall provide and maintain a 1.00 lot - -
Consultants Office with Conference Room, Pantry, - -
Toilet and Bunkhouse Approx. 90 sq.m and all other - -
temporary facilities deemed necessary to complete - -
the Works. - -
- -
B The Contractor shall provide and maintain sufficient 1.00 lot - -
temporary sheds/warehouse for the storage of - -
materials, tools and equipment for the use of all - -
persons employed on The Site. - -
- -
C The Contractor shall allow for the 1.00 lot - -
removal/demobilization of site accommodation and - -
temporary works in connection with site - -
accommodation. - -
- -
Temporary Works in connection with the site - -
establishment - -
- -
D The Contractor shall use access to the site as directed - -
by the Client’s representatives and shall provide and - -
maintain all necessary temporary roads, paths and - -
paving (including on-site car parking), footways and - -
the like on site. - -
- -
E The Contractor will be responsible for arranging the - -
necessary temporary connections to the sewers and - -
drainage systems and making good at completion of - -
The Works. - -
- -
Furniture & Equipment - -
- -
F The Contractor shall allow for and provide for the 1.00 lot 500,000.00 500,000.00 500,000.00
office furniture, equipment; - -
8 sets Computer table with drawers & locks and computer chair - -
8 Visitors chairs - -
3 pcs Laptop i7, 8GB RAM, installed with programmes (MS Office, Auto Cadd, MS Project) - -
3 pcs Desktop Computer i5, 8GB RAM, installed with programmes (MS Office, Auto Cadd, MS Project) - -
1 Printer (Brothers MFC-J3930DW) with scanner, fax and continous supply of ink - -
1 Printer (Sharp AR-5520D) and continous supply of ink - -
Continous supply of bond paper - -
4pcs 4’ x 8’ white board - -
Conference Table and chairs (good for 20 person) - -
1 hot and cold water dispenser - -
1 dozen set of plates, cups, glasses and utensils - -
2 Double deck with foam - -
1 unit landline - -
1 unit refrigerator - -
2 filing cabinet - -
supply of arch files. folders. and the likes - -
1 digi cam - -
1 unit projector - -
- -
To Collection (Php) 500,000.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Security Equipment - -
- -
A The Contractor shall ensure that gates are fitted with 1.00 lot - -
temporary vehicle control barrier at all entrances and - -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
- -
Barriers & Safety Scaffolding - -
- -
A The Contractor shall provide guard rails and edge 1.00 lot - -
protection to edges of suspended slab and roofs, - -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Samples - -
- -
A The Contractor shall allow herein for all costs incurred 1.00 lot - -
in connection with the provision of samples and - -
mock-ups of any material or workmanship. The - -
Client’s representatives shall have the right to reject - -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Final Cleaning - -
- -
A Provide for removing all protective casings and - -
coverings and removing all rubbish from the site and - -
clean the buildings inside and out, including - -
thoroughly cleaning all floors and paving, easing and - -
adjusting all doors, ventilators, casements etc., cutting - -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
TO COLLECTION Page 1 of 10 -
Page 2 of 10 -
Page 3 of 10 9,352,000.00
Page 4 of 10 500,000.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Page 5 of 10 -
Page 6 of 10 -
Page 7 of 10 -
Page 8 of 10 13,200,000.00
Page 9 of 10 2,022,915.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
EXISTING CONDITONS
Demolition Works
OTHERS
B _____________________
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
- -
CIVIL AND STRUCTURAL WORKS - -
- -
SITE ADAPTATION - -
- -
Clearing and Grubbing - -
Removal of vegetation at the site, including stripping - -
of sod and top soil, and tree pruning for the site - -
clearing - -
A Clearing and grubbing 1,000 m2 150.00 150.00 150,000.00
- -
Dewatering - -
Removal of subsurface water to permit - -
construction under reasonably dry conditions - -
for preparation of foundations, pipe bedding - -
and, well points, trench drains, and relief - -
drains. (Provisional Amount) - -
B Dewatering 1 lot 100,000.00 100,000.00 100,000.00
- -
Excavation and Fill - -
Excavation shall perform as describe regardless - -
of the character of the material encountered, - -
within the limits of work, to the lines, grades and - -
depths indicated on the drawings - -
C Bulk Excavation 3,213 m3 500.00 500.00 1,606,500.00
D Structural excavation 3,614 m3 500.00 500.00 1,807,000.00
E Soil Protection 1 lot 1,800,000.00 1,800,000.00 1,800,000.00
- -
Backfill materials shall consist of approved site - -
excavated materials and shall be free from brush, - -
roots and other unsuitable materials which would be - -
detrimental to compaction requirements - -
F Well compacted granular fill 1,733 m3 1,200.00 350.00 1,550.00 2,686,150.00
G Compact sand filler to lift pit 89 m3 1,200.00 350.00 1,550.00 137,950.00
H Hauling and disposal 5,094 m3 300.00 300.00 1,528,200.00
- -
Soil Treatment - -
Supply and application of soil treatment chemicals to - -
prevent termites including usage of tools and - -
equipment to complete the works. - -
I Soil Poisoning 1,496 m2 30.00 30.00 60.00 89,760.00
- -
Aggregates for Earthwork - -
Aggregate base course shall include spreading, - -
compacting, levelling, use of plant, tools, equipment, - -
and all necessary items and fixing accessories to - -
complete the works as required by the specifications. - -
J Gravel bedding 100 m3 1,300.00 350.00 1,650.00 165,000.00
- -
Trimming - -
K Horizontal/vertical trimming 586 m2 200.00 200.00 117,200.00
- -
- -
- -
- -
- -
- -
- -
To Collection (Php) 10,187,760.00
- -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
-
Grade 60 -
A 16mm diameter 73,095 kgs 33.37 8.00 41.37 3,023,940.15
to footing 71 kgs -
to beams and girders 8,301 kgs -
to Retaining Wall 15,231 kgs -
to Parapet Wall kgs -
to Fire and Cistern Tank 16,116 kgs -
to Stairs 16,212 kgs -
to Shearwall 2,406 kgs -
to STP 14,661 kgs -
Concrete Saddle for Elevated Water Tank 97 kgs -
-
B 20mm diameter 36,290 kgs 33.37 8.00 41.37 1,501,317.30
to footing 4,310 kgs -
to columns/pedestal 10,289 kgs -
to beams and girders 12,274 kgs -
to Parapet Wall kgs -
to Fire and Cistern Tank 812 kgs -
to Stairs 5,552 kgs -
to Shearwall 786 kgs -
to STP 2,267 kgs -
-
C 25mm diameter 528,204 kgs 33.37 8.00 41.37 21,851,799.48
to footing 31,130 kgs -
to footing tie beam 16,545 kgs -
to columns/pedestal 107,510 kgs -
to beams and girders 254,290 kgs -
to Parapet Wall kgs -
to Shearwall 118,729 kgs -
-
D 28mm diameter 76,954 kgs 33.37 8.00 41.37 3,183,586.98
to footing 2,960 kgs -
to footing tie beam 8,742 kgs -
to beams and girders 65,252 kgs -
to Parapet Wall kgs -
-
E 32mm diameter 89,351 kgs 33.37 8.00 41.37 3,696,450.87
to footing tie beam 11,546 kgs -
to beams and girders 77,805 kgs -
to Parapet Wall kgs -
-
F 36mm diameter 6,318 kgs 33.37 8.00 41.37 261,375.66
to beams and girders 6,318 kgs - - - -
2,432,890 - -
Structural Concrete - -
Supply, delivery and placing of concrete including all - -
necessary grouting, vibrating, hammering, tamping, - -
consolidating, curing, hardening, wetting, sealing, - -
brooming and scratching, protecting, sampling, - -
provision of necessary extended chutes and mixing - -
boards, usage of tools and equipment to: - -
- -
3000psi - -
G to slab on grade 100 m3 4,550.00 600.00 5,150.00 515,000.00
- -
To Collection (Php) 34,033,470.44
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
4000psi - -
A to footing 653 m3 4,600.00 600.00 5,200.00 3,395,600.00
B to footing tie beam 169 m3 4,600.00 600.00 5,200.00 878,800.00
- -
6000psi - -
C to columns/pedestal 130 m3 5,975.00 600.00 6,575.00 854,750.00
D to suspended slab/canopy 1,300 m3 5,975.00 600.00 6,575.00 8,547,500.00
E to beams and girders 1,824 m3 5,975.00 600.00 6,575.00 11,992,800.00
F to Stairs 138 m3 5,975.00 600.00 6,575.00 907,350.00
G to Shearwall 153 m3 5,975.00 600.00 6,575.00 1,005,975.00
H to Fire and Cistern Tank 149 m3 5,975.00 600.00 6,575.00 979,675.00
I to STP 127 m3 5,975.00 600.00 6,575.00 835,025.00
J Concrete Saddle for Elevated Water Tank 2 m3 5,975.00 600.00 6,575.00 13,150.00
- -
8000psi - -
K to columns/pedestal 145 m3 6,300.00 600.00 6,900.00 1,000,500.00
L to Shearwall 214 m3 6,300.00 600.00 6,900.00 1,476,600.00
- -
10000psi - -
M to columns/pedestal 175 m3 7,700.00 600.00 8,300.00 1,452,500.00
N to Retaining Wall 174 m3 7,700.00 600.00 8,300.00 1,444,200.00
O to Shearwall 292 m3 7,700.00 600.00 8,300.00 2,423,600.00
- -
CONCRETE WORKS - ARCHITECTURAL - -
- -
Miscellaneous Concrete - -
Supply and placing of standard concrete - -
aggregate floor topping, 3000 psi with mortar - -
enhancer to include surface preparation, - -
necessary chipping works, removing of loose - -
concrete and laitance; mixing, leveling, curing as - -
per Specifications; usage of tools - -
to waterproofed area - -
P concrete topping 1,074 m2 - -
Q concrete zocallo 266 lm - -
R concrete pads and concrete saddle 1 lot - -
S concrete ledge to exterior - 200mmW 5 lm - -
T concrete ledge to exterior - 380mmW 9 lm - -
U Concrete Curb 374 lm - -
- -
Precast Wall - -
Supply and installation of precast wall including - -
forms, concrete, rebars, tie wires including all - -
necessary tools and equipment to complete the - -
works - -
V Precast Wall 5,965 m2 3,500.00 1,000.00 4,500.00 26,842,500.00
- -
Precast Concrete - -
Supply and installation of precast concrete - -
curb including forms, concrete, rebars, tie wires - -
including all necessary tools and equipment to - -
complete the works - -
W Precast Concrete Wheel Guard 95 no 1,000.00 1,000.00 95,000.00
- -
- -
To Collection (Php) 64,145,525.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Page 2 of 6 40,310,435.82
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Page 3 of 6 34,033,470.44
Page 4 of 6 64,145,525.00
Page 5 of 6 1,563,762.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
- -
ARCHITECTURAL WORKS - -
- -
MASONRY - -
- -
Supply and installation of masonry shall include for - -
filling blocks solid with in-situ concrete and steel bar - -
reinforcement, stiffeners, lintel beams, all sundry - -
items such as tie wires, sealant, backing rod, mortar - -
and joint filler expansion joints with compressible filler - -
and joint sealant where necessary and all necessaey - -
fixings and accessories all in accordance with drawings - -
and Architect's specification. - -
A 150mm thick CHB wall 782 m2 1,566.00 312.00 1,878.00 1,468,596.00
B 100mm thick CHB wall 3,020 m2 1,458.00 312.00 1,770.00 5,345,400.00
- -
METALS - -
- -
Metal Fabrication - -
Supply and installation of stair railings; 1.5mmthk x 2" - -
x 2" vertical tubular baluster in 2 coats epoxy primer - -
and 2 coats epoxy top coat finish , spray applied; - -
1.5mmthk x 2" diameter grade 304 stainless steel - -
handrail in hairline finish; 1.5mmthk x 1" x 1" vertical - -
joint in 2 coats epoxy primer and 2 coats epoxy top - -
coat finish , spray applied; 1.5mmthk x 3/4" x 1 1/2" - -
horizontal tubular in 2 coats epoxy primer and 2 coats - -
epoxy top coat finish; including all necessary - -
accessories to complete the works - -
C Stair Railings to Fire Exit; 850mmH 228 lm - -
- -
Supply and installation of 1.5mmthk x 2" dia., Grade - -
304 stainless steel handrail, horizontal and vertical - -
baluster in welded jointing including all necessary - -
accessories, tools and equipment - -
D Railings to Main Entry Porch; 800mmH 9 lm - -
- -
Supply, fabrication and installation of 12mmthk - -
tempered clear glass railing with 20mm gap including - -
1.5mmthk x 50mm x 80mm Grade 304 stainless steel - -
handrail in hairline finish; all necessary accessories and - -
usage of tools and equipment. - -
E Railings to 12F - 14F; 1000mmH 21 lm - -
F Railings to 2F; 800mmH 18 lm - -
- -
Supply and installation of Utility deck fence;1.5mmthk - -
x 50mm x 50mm tubular vertical and horizontal - -
supports in 2 coats epoxy primer and 2 coats epoxy - -
top coat paint; 1.5mmthk x 50mm x 50mm tubular - -
balusters in 2 coats epoxy primer and 2 coats epoxy - -
top coat finish; including all necessary accessories to - -
complete the works - -
G Utility Deck Fence; 1300mmH 22 lm 4,867.00 4,867.00 107,074.00
- -
- -
- -
- -
- -
To Collection (Php) 6,921,070.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
- -
OPENINGS - -
- -
Steel Doors - -
Supply and installation of steel doors and jambs - -
including hardwares (measured separately), all - -
necessary fixing accessories, usage of equipment and - -
tools with required finishes as per architect - -
specification; Refer to door schedule - -
- -
A D-1: 44mmthk GA 18 Galvanized iron steel door in 2 6 set 25,000.00 25,000.00 150,000.00
coats epoxy primer and 2 coats QDE topcoat, spray - -
applied; 45mm x 100mm/150mm GA 16 Single - -
Rabbet; honeycomb insulation; 90mins fire rating; - -
6mmthk x 200mm x 1800mm clear vision glass - -
Dimension: 2-900mmW x 2400mmH - -
- -
B D-2: 44mmthk GA 18 Galvanized iron steel door in 2 1 set 11,000.00 11,000.00 11,000.00
coats epoxy primer and 2 coats QDE topcoat, spray - -
applied; 45mm x 100mm/150mm GA 16 Single - -
Rabbet; honeycomb insulation; 90mins fire rating; - -
6mmthk x 200mm x 1800mm clear vision glass - -
Dimension: 1000mmW x 2400mmH - -
- -
C D-3: 44mmthk GA 18 Galvanized iron steel door in 2 1 set 11,000.00 11,000.00 11,000.00
coats epoxy primer and 2 coats QDE topcoat, spray - -
applied; 45mm x 100mm/150mm GA 16 Single - -
Rabbet; honeycomb insulation; 90mins fire rating; - -
6mmthk x 200mm x 1800mm clear vision glass - -
Dimension: 1000mmW x 2400mmH - -
- -
D D-4: 44mmthk GA 18 Galvanized iron steel door in 2 1 set 10,700.00 10,700.00 10,700.00
coats epoxy primer and 2 coats QDE topcoat, spray - -
applied; 45mm x 100mm/150mm GA 16 Single - -
Rabbet; honeycomb insulation; 90mins fire rating; - -
6mmthk x 200mm x 800mm clear vision glass - -
Dimension: 1000mmW x 2400mmH - -
- -
E D-5: 44mmthk GA 18 Galvanized iron steel door in 2 set 10,700.00 10,700.00 21,400.00
2 coats epoxy primer and 2 coats QDE topcoat, - -
spray applied; 45mm x 100mm GA 16 Single - -
Rabbet; honeycomb insulation; 90mins fire rating; - -
6mmthk x 200mm x 800mm clear vision glass - -
Dimension: 1000mmW x 2400mmH - -
- -
F D-6: 44mmthk GA 18 Galvanized iron steel door in 2 1 set 11,750.00 11,750.00 11,750.00
coats epoxy primer and 2 coats QDE topcoat, spray - -
applied; 45mm x 100mm GA 16 Single Rabbet; - -
honeycomb insulation; 90mins fire rating; 6mmthk x - -
200mm x 800mm clear vision glass; 700mm x 400mm - -
louver blades - -
Dimension: 1000mmW x 2400mmH - -
- -
- -
- -
- -
To Collection (Php) 215,850.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
A D-7: 44mmthk GA 18 Galvanized iron steel door in 2 13 set 10,000.00 10,000.00 130,000.00
coats epoxy primer and 2 coats QDE topcoat, spray - -
applied; 45mm x 150mm GA 16 Single Rabbet; - -
rockwool insulation; 120mins fire rating; 6mmthk x - -
200mm x 800mm clear wired vision glass - -
Dimension: 900mmW x 2400mmH - -
- -
B D-8: 44mmthk GA 18 Galvanized iron steel door in 2 13 set 10,000.00 10,000.00 130,000.00
coats epoxy primer and 2 coats QDE topcoat, spray - -
applied; 45mm x 150mm GA 16 Single Rabbet; - -
rockwool insulation; 120mins fire rating; 6mmthk x - -
200mm x 800mm clear wired vision glass - -
Dimension: 900mmW x 2400mmH - -
- -
C D-9: 44mmthk GA 18 Galvanized iron steel door in 2 1 set 10,000.00 10,000.00 10,000.00
coats epoxy primer and 2 coats QDE topcoat, spray - -
applied; 45mm x 100mm GA 16 Single Rabbet; - -
rockwool insulation; 120mins fire rating; 6mmthk x - -
200mm x 800mm clear wired vision glass - -
Dimension: 900mmW x 2400mmH - -
- -
D D-10: 44mmthk GA 18 Galvanized iron steel door in 2 1 set 10,000.00 10,000.00 10,000.00
coats epoxy primer and 2 coats QDE topcoat, spray - -
applied; 45mm x 100mm GA 16 Single Rabbet; - -
rockwool insulation; 120mins fire rating; 6mmthk x - -
200mm x 800mm clear wired vision glass - -
Dimension: 900mmW x 2400mmH - -
- -
E D-11: 44mmthk GA 18 Galvanized iron steel door in 2 2 set 10,000.00 10,000.00 20,000.00
coats epoxy primer and 2 coats QDE topcoat, spray - -
applied; 45mm x 100mm GA 16 Single Rabbet; - -
Honeycomb insulation; 90mins fire rating; 6mmthk x - -
200mm x 800mm clear vision glass - -
Dimension: 900mmW x 2400mmH - -
- -
F D-12: 44mmthk GA 18 Galvanized iron steel door in 1 set 10,000.00 10,000.00 10,000.00
2 coats epoxy primer and 2 coats QDE topcoat, - -
spray applied; 45mm x 100mm GA 16 Single - -
Rabbet; Honeycomb insulation; 90mins fire rating; - -
600mm x 400mm Louver Blades - -
Dimension: 900mmW x 2400mmH - -
- -
G D-13: 44mmthk GA 18 Galvanized iron steel door in 8 set 11,000.00 11,000.00 88,000.00
2 coats epoxy primer and 2 coats QDE topcoat, - -
spray applied; 45mm x 100mm GA 16 Single - -
Rabbet; Honeycomb insulation; 90mins fire rating; - -
200mm x 1800mm Louver Blades - -
Dimension: 900mmW x 2400mmH - -
- -
- -
- -
- -
- -
- -
- -
To Collection (Php) 398,000.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Handle - -
Dimension: 8925mmL+2125mmL x 2800mmH; - -
Door Panel/s: 4-825mmW x 2400mmH - -
Window Panel/s: 8-909mmW x 2200mmH - -
- -
B SF-08: 12mmthk clear tempered glass with 8 fixed 1 set 118,803.00 118,803.00 118,803.00
panels - -
Dimension: 2-900mmW x 2400mmH - -
- -
Aluminum Windows - -
Supply and installation of insulated glass unit (6mm - -
ASG PG clear temp. hard coated low-e #2 +A12 + 6mm - -
ASG clear temp.float in powder coated aluminum - -
frame awning windows including all necessary - -
hardwares, accessories, usage of tools and equipment, - -
all in accordance with the Consultant's specifications. - -
Refer to Window Schedule - -
C W-1: 8000mmL x 2200mmH Awning Window to 1 set 534,182.00 534,182.00 534,182.00
Rentable Unit 604 - -
- -
D W-2: 7125mmL x 2200mmH Awning Window to 1 set 474,161.00 474,161.00 474,161.00
Rentable Unit 603 - -
- -
E W-3: 3800mmL x 2000mmH Awning Window to 2 set 233,153.00 233,153.00 466,306.00
Commercial Unit 203 - -
- -
F W-4: 3500mmL x 2200mmH Awning Window to 33 set 245,154.00 245,154.00 8,090,082.00
Rentable Unit 703 & 704, Mercantile Area, Laboratory, - -
Macare Office, Kitchen/Prep Area, Multipurpose area - -
01 and Multipurpose area 02 - -
- -
G W-5: 3500mmL x 2200mmH Awning Window to 32 set 239,384.00 239,384.00 7,660,288.00
Rentable Unit 601 & 602, 701 & 702,Mercantile Area, - -
Laboratory, Master's Bedroom, Bedroom 01, Living - -
Area and Macare Office - -
- -
H W-6: 2700mmL x 2200mmH Awning Window to 8 set 187,231.00 187,231.00 1,497,848.00
Rentable Unit 703&704, Mercantile Area, Laboratory, - -
Macare Office, Multipurpose Area 02 - -
- -
I W-7: 2400mmL x 2100mmH Awning Window 9 set 166,642.00 166,642.00 1,499,778.00
Rentable Unit 602, 702, Mercantile Area, Laboratory, - -
Macare Office, Multipurpose Area 01 - -
- -
J W-8: 2400mmL x 1800mmH Awning Window to 1 set 143,535.00 143,535.00 143,535.00
Smoking Area - -
- -
- -
- -
- -
To Collection (Php) 21,445,056.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
- -
Door Hardwares - -
- -
Take delivery, receipt and installation only of the - -
following owner supplied specified door hardwares - -
including all necessary accessories, tools and - -
equipment - -
- -
C Cylindrical Lever Lockset in satin chrome finish 78 no OSM - -
D Grade 2 Cylinder Dead Bolt w/ Thumb Turn 1 no OSM - -
E 3mmthk x 4" x 4" SS ball bearing hinge 364 no OSM - -
F 3mmthk x 4.5" x 4.5" SS ball bearing hinge 128 no OSM - -
G Surface Mounted Parallel Lever Arm 112 no OSM - -
H 33"Mortise type panic device with lever 32 no OSM - -
I Stainless Steel Pull Handle 1 no OSM - -
J Stainless Steel Push Handle 1 no OSM - -
K Perimeter Seal 123 lm OSM - -
- -
Mirror - -
- -
Take delivery, receipt and installation only of the - -
following owner supplied facial mirror in metal frames - -
including backing and all necessary accessories to - -
complete the works. - -
- -
L 600mmW x 1200mmH to Toilet -01 @ Basement 1 1 set OSM - -
M 700mmW x 1200mmH to Toilet -02 (PWD) @ 1 set OSM - -
Basement 1 - -
N 900mmW x 1150mmH to Toilet-03 Typical Driver's 2 set OSM - -
Toilet - -
O 1600mmW x 1150mmH to Typical Toilet-05 (HE) 8 set OSM - -
P 2400mmW x 1150mmH to Typical Toilet-06 (SHE) 8 set OSM - -
Q 600mmW x 1200mmH to Toilet -05 Maid's Toilet 1 set OSM - -
R 1100mmW x 1150mmH to Toilet -06 Master's T&B 1 set OSM - -
S 1000mmW x 1150mmH to Toilet -07 Common T&B 1 set OSM - -
T 2000mmW x 1150mmH to Toilet -09 (HE) @ 1 set OSM - -
Penthouse - -
U 2300mmW x 1150mmH to Toilet -10 (SHE) @ 1 set OSM - -
Penthouse - -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
To Collection (Php) 943,727.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
- -
Supply and installation of Motorized galvalume - -
Roll up grill including shutter lock with - -
padlock holder including all necessary hardwares, - -
fixing accessories, usage of equipment and tools - -
to complete the works. - -
C RUD-1: 7080mmL x 3600mmH 1 set 112,780.50 - 112,780.50 112,780.50
D RUD-2: 3600mmL x 5800mmH 1 set 78,967.00 - 78,967.00 78,967.00
E RUD-2: 3600mmL x 2100mmH 1 set 41,996.50 - 41,996.50 41,996.50
- -
FINISHES - -
- -
Cement Plastering - -
Plastering works including all necessary tools and - -
equipment to complete the works - -
F to 150mm CHB Wall 1,564 m2 130.00 280.00 410.00 641,240.00
G to 100mm CHB Wall 6,040 m2 130.00 280.00 410.00 2,476,400.00
- -
Skimcoating works including all necessary accessories, - -
usage of tools and equipment to complete the works - -
H to Precast Walls 11,930 m2 80.00 150.00 230.00 2,743,900.00
I to columns 2,019 m2 80.00 150.00 230.00 464,370.00
- -
Rubbed Concrete including all necessary accessories, - -
usage of tools and equipment to complete the works - -
J to slab soffit 6,798 m2 80.00 150.00 230.00 1,563,540.00
- -
Tiling Works - -
Supply and installation of tiles including cutting, - -
trimming necessary tile adhesives or mortar - -
(whichever is applicable), levelling, setting, fixing - -
cleaning, usage of tools and equipment all in - -
accordance with the given specifications. - -
Floor Tiles - -
K FF-10: 1200mm x 600mm homogeneous polished tiles 677 m2 OSM 400.00 400.00 270,800.00
L FF-11: 600mm x 600mm homogeneous polished tiles 1,857 m2 OSM 400.00 400.00 742,800.00
M FF-12: 300mm x 300mm homogeneous matte tiles 290 m2 OSM 400.00 400.00 116,000.00
N FF-15: 1200mm x 600mm Rustic Tiles 82 m2 OSM 400.00 400.00 32,800.00
- -
Wall Tiles - -
O WF-5: 8mm x 300mm x 300mm homogeneous matte 1,408 m2 OSM 400.00 400.00 563,200.00
tiles - -
- -
- -
- -
- -
- -
To Collection (Php) 10,079,169.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
- -
F _____________________ - -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
To Collection (Php) -
Page 2 of 18 -
Page 3 of 18 215,850.00
Page 4 of 18 398,000.00
Page 5 of 18 417,200.00
Page 6 of 18 138,350.00
Page 7 of 18 114,500.00
Page 8 of 18 1,648,276.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Page 9 of 18 21,445,056.00
Page 10 of 18 943,727.00
Page 11 of 18 653,286.50
Page 12 of 18 10,079,169.00
Page 13 of 18 -
Page 14 of 18 1,389,150.00
Page 15 of 18 1,059,815.00
Page 16 of 18 80,930.00
Page 17 of 18 -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
MECHANICAL WORKS
A ACCU-V3 m - -
B FCU-V3 m - -
C FCU-V3, V4 and FCU-V1 x 3 m - -
D FCU-V3 m - -
E FCU-V4 and FCU-V1 x 3 m - -
F FCU-V4 m - -
G FCU-V1 x 3 m - -
H FCU-V1 m - -
I FCU-V1 x 2 m - -
J FCU-V1 m - -
K FCU-V1 m - -
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
For Lobby
P ACCU-V4 m - -
Q FCU-V5 m - -
R FCU-V5 x 2 m - -
S FCU-V5 m - -
T FCU-V5 m - -
U ACCU-V8 m - -
V FCU-V8 m - -
W FCU-V8 x 2 and V7 x 2 m - -
X FCU-V8 m - -
Y FCU-V8 and V7 x 2 m - -
Z FCU-V8 m - -
AA FCU-V7 x 2 m - -
AB FCU-V7 m - -
AC FCU-V7 m - -
AD
For Laboratory Area
AE ACCU-V8 m - -
AF FCU-V8 m - -
AG FCU-V8 x 2 and V7 x 2 m - -
AH FCU-V8 m - -
AI FCU-V8 and V7 x 2 m - -
AJ FCU-V8 m - -
AK FCU-V7 x 2 m - -
AL FCU-V7 m - -
AM FCU-V7 m - -
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
A ACCU-V8 m - -
B FCU-V8 m - -
C FCU-V8 x 2 and V7 x 2 m - -
D FCU-V8 m - -
E FCU-V8 and V7 x 2 m - -
F FCU-V8 m - -
G FCU-V7 x 2 m - -
H FCU-V7 m - -
I FCU-V7 m - -
K ACCU-V6 m - -
L FCU-V7 m - -
M FCU-V7 x 3 m - -
N FCU-V7 m - -
O FCU-V7 x 2 m - -
P FCU-V7 m - -
Q FCU-V7 m - -
R ACCU-V7 m - -
S FCU-V8 m - -
T FCU-V8 x 2 and V7 m - -
U FCU-V8 m - -
V FCU-V8 and V7 m - -
W FCU-V8 m - -
X FCU-V7 m - -
Y ACCU-V2 m - -
Z FCU-V3 m - -
AA FCU-V3 x 2 and V2 m - -
AB FCU-V3 m - -
AC FCU-V2 and V3 m - -
AD FCU-V2 m - -
AE FCU-V3 m - -
AF ACCU-V7 m - -
AG FCU-V8 m - -
AH FCU-V8 x 3 m - -
AI FCU-V8 m - -
AJ FCU-V8 x 2 m - -
AK FCU-V8 m - -
AL FCU-V8 m - -
AM ACCU-V6 m - -
AN FCU-V8 m - -
AO FCU-V8 x 2 m - -
AP FCU-V8 m - -
AQ FCU-V8 m - -
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
A ACCU-V1/FAU-1 m - -
EQUIPMENT
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
For Lobby
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Duct Insulation
DUCT ANCILLARIES
VENTILATION SYSTEM
General Ventilation
Galvanized Iron, Rectangular Duct
I Ga. no. 22 184 m2 - -
J Ga. no. 24 102 m2 - -
K Ga. no. 26 20 m2 - -
To Collection (Php) -
Toilet Ventilation
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
A Ga. no. 24 9 m2 - -
B Ga. no. 26 179 m2 - -
Kitchen Ventilation
DUCT ANCILLARIES
General Ventilation
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Fire Damper
K 1000 x 300mm 2 no - -
L Temperature Sensor 1 no - -
Toilet Ventilation
Wall Cap
N 250mm diameter 17 no - -
O 200mm diameter 1 no - -
P 150mm diameter 8 no - -
Kitchen Ventilation
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Fire Damper
C 700 x 450mm 32 no - -
General Ventilation
S TF-1, 680 CMH, 92.13 Pa, 0.25 Motor hp, 1 no OSM - -
230V/1Ø/60Hz, Ceiling Cassette Type
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Toilet Ventilation
Kitchen Ventilation
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Stair Pressurization
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
To Collection (Php) -
TO COLLECTION Page 1 of 13 -
Page 2 of 13 -
Page 3 of 13 -
Page 4 of 13 -
Page 5 of 13 -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Page 6 of 13 -
Page 7 of 13 -
Page 8 of 13 -
Page 9 of 13 -
Page 10 of 13 -
Page 11 of 13 -
Page 12 of 13 -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
ELECTRICAL WORKS
XLPE
A Line wires 1 item By Others
B Medium voltage grounding 1 item By Others
THHN
C 250 mm2 796 m 1,131.00 1,131.00 900,276.00
D 200 mm2 1,393 m 879.00 879.00 1,224,447.00
E 125 mm2 576 m 585.00 585.00 336,960.00
F 100 mm2 541 m 458.00 458.00 247,778.00
G 60 mm2 1,031 m 301.00 301.00 310,331.00
H 50 mm2 199 m 245.00 245.00 48,755.00
I 38 mm2 636 m 218.00 218.00 138,648.00
J 30 mm2 1,509 m 150.00 150.00 226,350.00
K 22 mm2 7,716 m 104.00 104.00 802,464.00
L 14 mm2 223 m 88.00 88.00 19,624.00
M 8.0 mm2 6,852 m 42.00 42.00 287,784.00
N 5.5 mm2 1,248 m 29.00 29.00 36,192.00
O 3.5 mm2 103 m 25.00 25.00 2,575.00
P 2.6 mm2 1,331 m 18.00 18.00 23,958.00
Q 2.0 mm2 42,399 m 15.00 15.00 635,985.00
BCU
X 22 mm2 389 m - -
Y 8.0 mm2 103 m - -
Z 5.5 mm2 31 m - -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Medium-Voltage Transformer
Supply and installation of transformer complete
with nameplates, termination materials, including
necessary accessories all in accordance with the
drawing and specifications.
Low-Voltage Switchgear
Supply and installation of the low-voltage switchgear,
including all necessary hangers and supports and
accessories all in accordance with the drawing and
specifications.
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
A MDP 1 set - -
Main: 1600AT/AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 1000AT/AF, 3PSN, 3Ø
1 - 700AT/800AF, 3PSN, 3Ø
1 - 600AT/800AF, 3PSN, 3Ø
1 - 125AT/225AF, 3PSN, 3Ø
2 - space
B DPAD 1 set - -
Main: 1000AT/AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 300AT/400AF, 3PSN, 3Ø
1 - 150AT/225AF, 3PSN, 3Ø
1 - 125AT/225AF, 3PSN, 3Ø
1 - 100AT/AF, 3PSN, 3Ø
2 - 70AT/100AF, 3PSN, 3Ø
1 - 60AT/100AF, 3PSN, 3Ø
2 - 50AT/100AF, 3PSN, 3Ø
1 - space
C PAD-B1 1 set - -
Main: 70AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 30AT/100AF, 1PSN, 1Ø
26 - 20AT/100AF, 1PSN, 1Ø
D PAD-3F 1 set - -
Main: 50AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
22 - 20AT/100AF, 1PSN, 1Ø
E PAD-6F+PAD-7F 1 set - -
Main: 70AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 60AT/100AF, 3PSN, 3Ø
1 - 50AT/100AF, 3PSN, 3Ø
F PAD-6F 1 set - -
Main: 50AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 30AT/100AF, 1PSN, 1Ø
7 - 20AT/100AF, 1PSN, 1Ø
G PAD-7F 1 set - -
Main: 50AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
6 - 20AT/100AF, 1PSN, 1Ø
To Collection (Php) -
A PAD-12F 1 set - -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
B PAD-14F 1 set - -
Main: 150AT/225AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 100AT/AF, 1PSN, 1Ø
15 - 20AT/100AF, 1PSN, 1Ø
C PAD-H 1 set - -
Main: 100AT/AF, 1PSN, 40V, 1Ø, 1W+N+G
Branches:
1 - 30AT/100AF, 1PSN, 1Ø
16 - 20AT/100AF, 1PSN, 1Ø
1 - space
D PAD-P 1 set - -
Main: 100AT/AF, 3PSN, 415V/240, 3Ø, 3W+N+G
Branches:
1 - 30AT/100AF, 1PSN, 1Ø
27 - 20AT/100AF, 1PSN, 1Ø
E PTEL 1 set - -
Main: 300AT/400AF, 3PSN, 415V/240, 3Ø, 3W+N+G
Branches:
3 - 100AT/AF, 3PSN, 3Ø
3 - 20AT/100AF, 1PSN, 1Ø
F MDP-LS 1 set - -
Main: 150AT/225AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 125AT/225AF, 3PSN, 3Ø
3 - 50AT/100AF, 3PSN, 3Ø
2 - space
G EDP-L 1 set - -
Main: 50AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
3 - 20AT/100AF, 1PSN, 1Ø
H PEL-FR 1 set - -
Main: 125AT/225AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 100AT/AF, 3PSN, 3Ø
3 - 20AT/100AF, 1PSN, 1Ø
I EDP-RD 1 set - -
Main: 50AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
2 - 30AT/100AF, 3PSN, 3Ø
2 - 20AT/100AF, 1PSN, 1Ø
To Collection (Php) -
A PEQ 1 set - -
Main: 50AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Branches:
6 - 20AT/100AF, 1PSN, 1Ø
B MP-LAB 1 set - -
Main: 500AT/800AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 300AT/400AF, 3PSN, 3Ø
1 - 125AT/225AF, 3PSN, 3Ø
2 - 60AT/100AF, 3PSN, 3Ø
2 - 50AT/100AF, 3PSN, 3Ø
C PAD-8F 1 set - -
Main: 50AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
16 - 20AT/100AF, 1PSN, 1Ø
D PAD-9F 1 set - -
Main: 50AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
14 - 20AT/100AF, 1PSN, 1Ø
E PME-LAB 1 set - -
Main: 300AT/400AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
8 - 70AT/100AF, 3PSN, 3Ø
F PAD-10F 1 set - -
Main: 60AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
20 - 20AT/100AF, 1PSN, 1Ø
G PAD-11F 1 set - -
Main: 60AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
20 - 20AT/100AF, 1PSN, 1Ø
H P-LAB 1 set - -
Main: 125AT/225AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
24 - 20AT/100AF, 1PSN, 1Ø
I MP-LAB 1 set - -
Main: 700AT/800AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 300AT/400AF, 3PSN, 3Ø
1 - 200AT/225AF, 3PSN, 3Ø
3 - 50AT/100AF, 3PSN, 3Ø
To Collection (Php) -
A PME-ACCU1 1 set - -
Main: 300AT/400AF, 3PSN, 415V/240, 3Ø, 3W+N+G
Branches:
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
8 - 70AT/100AF, 3PSN, 3Ø
1 - 70AT/100AF, 1PSN, 1Ø
1 - 40AT/100AF, 1PSN, 1Ø
2 - 20AT/100AF, 1PSN, 1Ø
B PEL-1 1 set - -
Main: 200AT/225AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
3 - 100AT/AF, 3PSN, 3Ø
1 - 30AT/100AF, 1PSN, 1Ø
8 - 20AT/100AF, 1PSN, 1Ø
C PSE 1 set - -
Main: 100AT/AF, 3PSN, 415V/240, 3Ø, 3W+N+G
Branches:
2 - 50AT/100AF, 3PSN, 3Ø
3 - 30AT/100AF, 3PSN, 3Ø
1 - 30AT/100AF, 1PSN, 1Ø
4 - 20AT/100AF, 1PSN, 1Ø
D PME-B1 1 set - -
Main: 50AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
1 - 30AT/100AF, 3PSN, 3Ø
2 - 20AT/100AF, 3PSN, 3Ø
9 - 20AT/100AF, 1PSN, 1Ø
E PME-3F 1 set - -
Main: 50AT/100AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
3 - 20AT/100AF, 3PSN, 3Ø
9 - 20AT/100AF, 1PSN, 1Ø
F PFP 1 set - -
Main: 300AT/400AF, 3PSN, 415V/240, 3Ø, 3W+N+G
Branches:
1 - 300AT/400AF, 3PSN, 3Ø
1 - 50AT/100AF, 3PSN, 3Ø
1 - 20AT/100AF, 3PSN, 3Ø
2 - space
To Collection (Php) -
Wiring Devices
Take delivery reciept and installation only of the
following owner supplied wiring devices. The electrical
contractor shall supply and install necessary hangers,
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Electricity Metering
Supply and installation of meter centers complete
with meralco approved electric meters, breaker
gutters,busbars and all other necessary accessories for
a complete working system as shown in the drawings
and specifications.
N MCRT 1 set - -
Main: 600AT/800AF, 3PSN, 415/240V, 3Ø, 3W+N+G
Branches:
13 - 70AT/100AF, 3P, 3Ø
Surface mounted in NEMA-1 enclosure including
busbar/wire gutter and kwhr meter
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Transfer Switch
Supply and installation of the transfer switch,
including all necessary hangers and supports and
accessories all in accordance with the drawing
and specifications.
O ATS-MDP 1600AT 1 no - -
P ATS-MPLAB 500AT 1 no - -
Q 350A, 4P, ATS-LS with by-pass switch and 1 no - -
overlapping neutral
R ATS-MPLS 150AT 1 no - -
S 70A, ATS 1 no - -
To Collection (Php) -
A 300 KVAR 1 no - -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
B 100mm2 BC wire 91 m - -
C 65mm dia PVC 82 m - -
D Ground well including ground rod 3 no - -
E Exothermic and compression connections 3 no - -
F TEC 1 no - -
G Lightning arrester 1 no - -
Lighting Fixtures
Take delivery reciept and installation of the following
owner supplied lighting fixtures. The electrical
contractor shall supply and install hangers, supports
and all necessary accessories to complete the work as
shown in the drawings and specifications.
OTHERS
S _____________________
To Collection (Php) -
Page 2 of 12 -
Page 3 of 12 541,626.00
Page 4 of 12 -
Page 5 of 12 -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Page 6 of 12 -
Page 7 of 12 -
Page 8 of 12 -
Page 9 of 12 -
Page 10 of 12 -
Page 11 of 12 -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
AUXILIARY WORKS
E Utility box 2 no - -
F TPB 22 no - -
G PB 2 set - -
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
A RG 6 co axial cable 74 m - -
B RG 11 co axial cable 71 m - -
C 20mm diameter 66 m - -
D 50mm diameter 128 m - -
E Utility box 2 no - -
F CATVPB 5 no - -
J CATV outlet 2 no - -
K CATV Equipment box 1 set - -
PABGM SYSTEM
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
C Utility box 64 no - -
D Junction box 470 no - -
E Square box 32 no - -
F FAPB 15 no - -
CCTV SYSTEM
To Collection (Php) -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
OTHERS
To Collection (Php) -
TO COLLECTION Page 1 of 6 -
Page 2 of 6 -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Page 3 of 6 -
Page 4 of 6 -
Page 5 of 6 -
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
PLUMBING WORKS
Elbow 90⁰
E 150mm diameter 2 no 3,772.00 1,697.40 5,469.40 10,938.80
F 100mm diameter 18 no 743.00 334.35 1,077.35 19,392.30
G 75mm diameter 24 no 409.00 184.05 593.05 14,233.20
H 65mm diameter 10 no 291.00 130.95 421.95 4,219.50
Tee
I 100mm diameter 5 no 1,007.00 453.15 1,460.15 7,300.75
J 75mm diameter 4 no 548.00 246.60 794.60 3,178.40
K 65mm diameter 2 no 425.00 191.25 616.25 1,232.50
Reducer
L 100 x 75mm diameter 2 no 637.00 286.65 923.65 1,847.30
M 100 x 65mm diameter 1 no 637.00 286.65 923.65 923.65
Flange
N 150mm diameter 4 no 1,271.00 571.95 1,842.95 7,371.80
O 100mm diameter 26 no 700.00 315.00 1,015.00 26,390.00
P 75mm diameter 16 no 458.00 206.10 664.10 10,625.60
Q 65mm diameter 8 no 354.00 159.30 513.30 4,106.40
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Elbow 90⁰
A 110mm diameter 17 no 3,142.00 1,413.90 4,555.90 77,450.30
B 90mm diameter 3 no 2,107.00 948.15 3,055.15 9,165.45
C 63mm diameter 38 no 718.00 323.10 1,041.10 39,561.80
Tee
D 110mm diameter 5 no 3,886.00 1,748.70 5,634.70 28,173.50
E 90mm diameter 2 no 2,367.00 1,065.15 3,432.15 6,864.30
Tee Reducer
F 110 x 90mm diameter 1 no 3,997.00 1,798.65 5,795.65 5,795.65
G 90 x 63mm diameter 7 no 2,475.00 1,113.75 3,588.75 25,121.25
H 90 x 50mm diameter 5 no 2,475.00 1,113.75 3,588.75 17,943.75
I 63 x 40mm diameter 8 no 1,076.00 484.20 1,560.20 12,481.60
J 63 x 32mm diameter 8 no 1,076.00 484.20 1,560.20 12,481.60
K 63 x 20mm diameter 10 no 1,076.00 484.20 1,560.20 15,602.00
Reducer
L 110 x 90mm diameter 1 no 1,473.00 662.85 2,135.85 2,135.85
M 110 x 63mm diameter 1 no 1,473.00 662.85 2,135.85 2,135.85
N 63 x 40mm diameter 9 no 335.00 150.75 485.75 4,371.75
End Cap
O 90mm diameter 1 no 1,157.00 520.65 1,677.65 1,677.65
Flange
P 110mm diameter 36 no 8,105.00 3,647.25 11,752.25 423,081.00
Q 90mm diameter 26 no 6,452.00 2,903.40 9,355.40 243,240.40
Flange
S 100mm diameter 4 no 5,400.00 2,430.00 7,830.00 31,320.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Gate Valve
A 4 inch diameter 15 no 42,000.00 6,300.00 48,300.00 724,500.00
B 3 inch diameter 15 no 27,000.00 4,050.00 31,050.00 465,750.00
C 2 - 1/2 inch diameter 1 no 18,000.00 2,700.00 20,700.00 20,700.00
D 2 inch diameter 9 no 5,000.00 750.00 5,750.00 51,750.00
E 1 - 1/2 inch diameter 5 no 3,200.00 480.00 3,680.00 18,400.00
F 1 - 1/4 inch diameter 25 no 2,400.00 360.00 2,760.00 69,000.00
G 1 inch diameter 37 no 1,600.00 240.00 1,840.00 68,080.00
H 3/4 inch diameter 20 no 900.00 135.00 1,035.00 20,700.00
I 1/2 inch diameter 15 no 680.00 102.00 782.00 11,730.00
Check Valve
J 4 inch diameter 1 no 40,000.00 6,000.00 46,000.00 46,000.00
K 3 inch diameter 2 no 24,000.00 3,600.00 27,600.00 55,200.00
Isolation Valve
M 4 inch diameter 1 no 48,000.00 7,200.00 55,200.00 55,200.00
Equalizing Valve
N 6 inch diameter 2 no 70,000.00 10,500.00 80,500.00 161,000.00
Water Meter
R 4 inch diameter 1 no 56,660.00 8,499.00 65,159.00 65,159.00
S 1 - 1/2 inch diameter 2 no 25,860.00 3,879.00 29,739.00 59,478.00
T 1 - 1/4 inch diameter 17 no 15,786.00 2,367.90 18,153.90 308,616.30
U 1 inch diameter 18 no 6,275.00 941.25 7,216.25 129,892.50
V 1/2 inch diameter 1 no 2,950.00 442.50 3,392.50 3,392.50
Wye Strainer
W 4 inch diameter 4 no 59,000.00 8,850.00 67,850.00 271,400.00
X 3 inch diameter 2 no 43,000.00 6,450.00 49,450.00 98,900.00
Foot Valve
Y 4 inch diameter 2 no 75,000.00 11,250.00 86,250.00 172,500.00
Flexible Connector
Z 4 inch diameter 3 no 28,000.00 4,200.00 32,200.00 96,600.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Drain Valve
A 2 - 1/2 inch diameter 2 no 38,000.00 5,700.00 43,700.00 87,400.00
Hose Bibb
B 1/2 inch diameter 10 no 680.00 102.00 782.00 7,820.00
Pressure Gauge
D 4" face dial, 1/4 NPT 18 no 6,000.00 900.00 6,900.00 124,200.00
Pumps
F Transfer Pump, 50 GPM, 350 ft TDH, 10 Motor HP, 1 set OSM 20,000.00 20,000.00
380V/3Ø/60Hz, Vertical Turbine Duplex Type
G Constant Pressure Pump, 40 GPM, 115 ft TDH, 1 set OSM 48,000.00 48,000.00
3 Motor HP, 230V/1Ø/60Hz, Centrifugal End Suction
Duplex Type with 132 Gals. Bladder Tank
Elbow 90⁰
L 150mm diameter 2 no 3,772.00 1,697.40 5,469.40 10,938.80
M 100mm diameter 18 no 743.00 334.35 1,077.35 19,392.30
N 65mm diameter 2 no 291.00 130.95 421.95 843.90
Tee
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Reducer
B 100 x 65mm diameter 1 no 637.00 286.65 923.65 923.65
Flange
C 150mm diameter 4 no 1,271.00 571.95 1,842.95 7,371.80
D 100mm diameter 14 no 700.00 315.00 1,015.00 14,210.00
E 65mm diameter 4 no 354.00 159.30 513.30 2,053.20
Elbow 90⁰
O 110mm diameter 4 no 3,142.00 1,413.90 4,555.90 18,223.60
P 90mm diameter 25 no 2,107.00 948.15 3,055.15 76,378.75
Q 63mm diameter 36 no 718.00 323.10 1,041.10 37,479.60
Tee
R 110mm diameter 4 no 3,886.00 1,748.70 5,634.70 22,538.80
S 90mm diameter 10 no 2,367.00 1,065.15 3,432.15 34,321.50
T 63mm diameter 5 no 840.00 378.00 1,218.00 6,090.00
Tee Reducer
U 90 x 63mm diameter 7 no 2,475.00 1,113.75 3,588.75 25,121.25
V 90 x 50mm diameter 4 no 2,475.00 1,113.75 3,588.75 14,355.00
W 63 x 40mm diameter 3 no 1,076.00 484.20 1,560.20 4,680.60
X 63 x 20mm diameter 1 no 1,076.00 484.20 1,560.20 1,560.20
Reducer
Y 110 x 90mm diameter 2 no 2,762.00 1,242.90 4,004.90 8,009.80
Z 110 x 63mm diameter 1 no 2,762.00 1,242.90 4,004.90 4,004.90
AA 90 x 50mm diameter 5 no 1,092.00 491.40 1,583.40 7,917.00
AB 63 x 50mm diameter 4 no 335.00 150.75 485.75 1,943.00
AC 63 x 40mm diameter 2 no 335.00 150.75 485.75 971.50
AD 63 x 25mm diameter 1 no 335.00 150.75 485.75 485.75
End Cap
A 90mm diameter 1 no 1,157.00 520.65 1,677.65 1,677.65
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Flange
B 110mm diameter 44 no 8,105.00 3,647.25 11,752.25 517,099.00
C 90mm diameter 42 no 6,452.00 2,903.40 9,355.40 392,926.80
D 75mm diameter 4 no 5,223.00 2,350.35 7,573.35 30,293.40
Gate Valve
E 4 inch diameter 9 no 42,000.00 6,300.00 48,300.00 434,700.00
F 3 inch diameter 11 no 27,000.00 4,050.00 31,050.00 341,550.00
G 2 - 1/2 inch diameter 1 no 18,000.00 2,700.00 20,700.00 20,700.00
H 2 inch diameter 13 no 5,000.00 750.00 5,750.00 74,750.00
I 1 - 1/2 inch diameter 17 no 3,200.00 480.00 3,680.00 62,560.00
J 1 - 1/4 inch diameter 19 no 2,400.00 360.00 2,760.00 52,440.00
K 1 inch diameter 4 no 1,600.00 240.00 1,840.00 7,360.00
L 3/4 inch diameter 5 no 900.00 135.00 1,035.00 5,175.00
M 1/2 inch diameter 15 no 680.00 102.00 782.00 11,730.00
Check Valve
N 3 inch diameter 2 no 24,000.00 3,600.00 27,600.00 55,200.00
O 2 inch diameter 1 no 4,700.00 705.00 5,405.00 5,405.00
Isolation Valve
Q 4 inch diameter 1 no 48,000.00 7,200.00 55,200.00 55,200.00
Equalizing Valve
R 6 inch diameter 2 no 70,000.00 10,500.00 80,500.00 161,000.00
Water Meter
V 1 - 1/2 inch diameter 13 no 25,860.00 3,879.00 29,739.00 386,607.00
W 1 - 1/4 inch diameter 1 no 15,786.00 2,367.90 18,153.90 18,153.90
Wye Strainer
X 4 inch diameter 3 no 59,000.00 8,850.00 67,850.00 203,550.00
Y 3 inch diameter 2 no 43,000.00 6,450.00 49,450.00 98,900.00
Z 2 inch diameter 1 no 30,000.00 4,500.00 34,500.00 34,500.00
Foot Valve
A 4 inch diameter 2 no 75,000.00 11,250.00 86,250.00 172,500.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Flexible Connector
B 4 inch diameter 3 no 28,000.00 4,200.00 32,200.00 96,600.00
C 2 inch diameter 1 no 12,000.00 1,800.00 13,800.00 13,800.00
Drain Valve
D 2 - 1/2 inch diameter 2 no 38,000.00 5,700.00 43,700.00 87,400.00
Hose Bibb
E 1/2 inch diameter 12 no 680.00 102.00 782.00 9,384.00
Pressure Gauge
G 4" face dial, 1/4 NPT 18 no 6,000.00 900.00 6,900.00 124,200.00
Pumps
I Transfer Pump, 40 GPM, 350 ft TDH, 10 Motor HP, 1 set OSM 20,000.00 20,000.00
380V/3Ø/60Hz, Vertical Turbine Duplex Type
J Constant Pressure Pump, 35 GPM, 115 ft TDH, 1 set OSM 48,000.00 48,000.00
3 Motor HP, 230V/1Ø/60Hz, Centrifugal End Suction
Duplex Type with 132 Gals. Bladder Tank
K Rain Water Booster Pump, 25 GPM, 60 ft TDH, 1 set OSM 30,000.00 30,000.00
3 Motor HP, 230V/1Ø/60Hz, Centrifugal End Suction
with 60 Gals. Bladder Tank
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Gate Valve
Equipment
SEWER LINE
Elbow 90⁰
H 100mm diameter 56 no 82.00 36.90 118.90 6,658.40
Elbow 45⁰
I 200mm diameter 2 no 995.00 447.75 1,442.75 2,885.50
J 150mm diameter 110 no 408.00 183.60 591.60 65,076.00
K 100mm diameter 414 no 63.00 28.35 91.35 37,818.90
L 75mm diameter 5 no 43.00 19.35 62.35 311.75
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Wye
M 150mm diameter 68 no 969.00 436.05 1,405.05 95,543.40
N 100mm diameter 68 no 131.00 58.95 189.95 12,916.60
Wye Reducer
O 200 x 150mm diameter 1 no 1,810.00 814.50 2,624.50 2,624.50
P 200 x 100mm diameter 1 no 1,810.00 814.50 2,624.50 2,624.50
Q 150 x 100mm diameter 91 no 689.00 310.05 999.05 90,913.55
R 150 x 50mm diameter 30 no 740.00 333.00 1,073.00 32,190.00
S 100 x 75mm diameter 2 no 173.00 77.85 250.85 501.70
T 100 x 50mm diameter 134 no 109.00 49.05 158.05 21,178.70
Reducer
U 200 x 100mm diameter 1 no 470.00 211.50 681.50 681.50
V 150 x 100mm diameter 42 no 285.00 128.25 413.25 17,356.50
Ends Caps/Cleanouts
A 150mm diameter 14 no 2,000.00 900.00 2,900.00 40,600.00
B 100mm diameter 28 no 1,500.00 675.00 2,175.00 60,900.00
Elbow 90⁰
D 100mm diameter 2 no 1,006.00 452.70 1,458.70 2,917.40
Elbow 45⁰
E 100mm diameter 2 no 476.00 214.20 690.20 1,380.40
Tee
F 100mm diameter 12 no 894.00 402.30 1,296.30 15,555.60
Floor Cleanout
G 100mm diameter 124 no 1,500.00 675.00 2,175.00 269,700.00
H 75mm diameter 1 no 1,000.00 450.00 1,450.00 1,450.00
Floor Drain
I 100mm diameter 5 no 1,400.00 630.00 2,030.00 10,150.00
J 50mm diameter 80 no 980.00 441.00 1,421.00 113,680.00
Shower Drains
K 50mm diameter 3 no 980.00 441.00 1,421.00 4,263.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
VENT LINE
Elbow 90⁰
A 100mm diameter 4 no 82.00 36.90 118.90 475.60
B 75mm diameter 14 no 56.00 25.20 81.20 1,136.80
Elbow 45⁰
C 100mm diameter 17 no 63.00 28.35 91.35 1,552.95
D 75mm diameter 2 no 43.00 19.35 62.35 124.70
Tee
E 100mm diameter 3 no 147.00 66.15 213.15 639.45
F 75mm diameter 3 no 85.00 38.25 123.25 369.75
Tee Reducer
G 100 x 75mm diameter 2 no 173.00 77.85 250.85 501.70
H 100 x 50mm diameter 68 no 109.00 49.05 158.05 10,747.40
I 75 x 50mm diameter 7 no 105.00 47.25 152.25 1,065.75
Reducer
J 100 x 75mm diameter 1 no 145.00 65.25 210.25 210.25
K 100 x 50mm diameter 2 no 135.00 60.75 195.75 391.50
L 75 x 50mm diameter 5 no 98.00 44.10 142.10 710.50
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Elbow 90⁰
D 300mm diameter 8 no 4,794.00 2,157.30 6,951.30 55,610.40
E 200mm diameter 10 no 995.00 447.75 1,442.75 14,427.50
F 150mm diameter 15 no 459.00 206.55 665.55 9,983.25
G 100mm diameter 64 no 82.00 36.90 118.90 7,609.60
H 75mm diameter 45 no 56.00 25.20 81.20 3,654.00
Elbow 45⁰
I 300mm diameter 45 no 4,260.00 1,917.00 6,177.00 277,965.00
J 200mm diameter 21 no 765.00 344.25 1,109.25 23,294.25
K 150mm diameter 26 no 408.00 183.60 591.60 15,381.60
L 100mm diameter 191 no 63.00 28.35 91.35 17,447.85
M 75mm diameter 115 no 43.00 19.35 62.35 7,170.25
Wye
N 300mm diameter 10 no 7,620.00 3,429.00 11,049.00 110,490.00
O 200mm diameter 8 no 1,415.00 636.75 2,051.75 16,414.00
P 150mm diameter 12 no 969.00 436.05 1,405.05 16,860.60
Q 100mm diameter 64 no 131.00 58.95 189.95 12,156.80
R 75mm diameter 65 no 85.00 38.25 123.25 8,011.25
Wye Reducer
S 200 x 150mm diameter 10 no 1,810.00 814.50 2,624.50 26,245.00
T 200 x 100mm diameter 10 no 1,810.00 814.50 2,624.50 26,245.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Reducer
Y 300 x 200mm diameter 2 no 3,000.00 1,350.00 4,350.00 8,700.00
Z 200 x 150mm diameter 3 no 525.00 236.25 761.25 2,283.75
AA 200 x 100mm diameter 8 no 470.00 211.50 681.50 5,452.00
AB 150 x 100mm diameter 12 no 280.00 126.00 406.00 4,872.00
AC 100 x 75mm diameter 3 no 145.00 65.25 210.25 630.75
End Cap/Cleanouts
A 300mm diameter 2 no 3,500.00 1,575.00 5,075.00 10,150.00
B 200mm diameter 4 no 2,500.00 1,125.00 3,625.00 14,500.00
C 150mm diameter 16 no 2,000.00 900.00 2,900.00 46,400.00
D 100mm diameter 25 no 1,500.00 675.00 2,175.00 54,375.00
E 75mm diameter 28 no 1,000.00 450.00 1,450.00 40,600.00
Floor Cleanout
F 150mm diameter 1 no 2,000.00 900.00 2,900.00 2,900.00
G 100mm diameter 38 no 1,500.00 675.00 2,175.00 82,650.00
H 75mm diameter 6 no 1,000.00 450.00 1,450.00 8,700.00
I 50mm diameter 2 no 500.00 225.00 725.00 1,450.00
Floor Drain
J 75mm diameter 11 no 1,200.00 540.00 1,740.00 19,140.00
Trench Drain
K 150mm diameter 6 no 3,500.00 1,575.00 5,075.00 30,450.00
L 75mm diameter 7 no 1,200.00 540.00 1,740.00 12,180.00
Deck Drain
M 100mm diameter 50 no 1,400.00 630.00 2,030.00 101,500.00
N 75mm diameter 2 no 1,200.00 540.00 1,740.00 3,480.00
Canopy Drain
Q 75mm diameter 3 no 1,200.00 540.00 1,740.00 5,220.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Oil Separator
S 25 GPM, Suspended Type 3 no OSM 5,000.00 15,000.00
Elbow 90⁰
A 150mm diameter 12 no 843.00 379.35 1,222.35 14,668.20
B 75mm diameter 5 no 335.00 150.75 485.75 2,428.75
Tee
C 150mm diameter 2 no 843.00 379.35 1,222.35 2,444.70
Flange
D 150mm diameter 8 no 538.00 242.10 780.10 6,240.80
E 75mm diameter 4 no 278.00 125.10 403.10 1,612.40
Gate Valve
F 150mm diameter 2 no 54,000.00 8,100.00 62,100.00 124,200.00
G 100mm diameter 2 no 42,000.00 6,300.00 48,300.00 96,600.00
H 75mm diameter 1 no 27,000.00 4,050.00 31,050.00 31,050.00
Check Valve
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Float Valve
M 100mm diameter 2 no N/A - -
Drain Valve
N 75mm diameter 3 no N/A - -
Filter
Pumps
A Drainage Sump Pump, 40 GPM, 50 ft TDH, 5.0 Motor 1 set OSM 20,000.00 20,000.00
HP, 380V/3Ø/60Hz, Submersible, Non-Clog System,
Duplex Pump
B Elevator Sump Pump, 25 GPM, 40 ft TDH, 2.0 Motor 1 set OSM 18,000.00 18,000.00
HP, 230V/1Ø/60Hz, Submersible, Non-Clog System,
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Elbow 90⁰
G 100mm diameter 5 no 82.00 36.90 118.90 594.50
H 75mm diameter 6 no 56.00 25.20 81.20 487.20
Elbow 45⁰
I 100mm diameter 21 no 63.00 28.35 91.35 1,918.35
J 75mm diameter 76 no 43.00 19.35 62.35 4,738.60
Wye
K 100mm diameter 8 no 131.00 58.95 189.95 1,519.60
L 75mm diameter 36 no 85.00 38.25 123.25 4,437.00
Wye Reducer
M 100 x 75mm diameter 4 no 173.00 77.85 250.85 1,003.40
N 100 x 50mm diameter 3 no 109.00 49.05 158.05 474.15
O 100 x 32mm diameter 1 no 109.00 49.05 158.05 158.05
P 75 x 50mm diameter 52 no 105.00 47.25 152.25 7,917.00
Q 75 x 32mm diameter 15 no 105.00 47.25 152.25 2,283.75
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Page 2 of 16 1,007,906.60
Page 3 of 16 4,551,748.30
Page 4 of 16 575,422.75
Page 5 of 16 1,703,602.10
Page 6 of 16 4,627,477.75
Page 7 of 16 657,392.00
Page 8 of 16 5,371,660.25
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Page 9 of 16 736,894.80
Page 10 of 16 433,054.10
Page 11 of 16 939,789.95
Page 12 of 16 1,573,348.05
Page 13 of 16 562,354.15
Page 14 of 16 328,245.05
Page 15 of 16 3,784,846.05
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
D Supply and installation of Fire Hose Cabinet with 17 no 16,000.00 2,400.00 18,400.00 312,800.00
40mm diameter angle valve, hose, PFE and other
miscellaneous items as shown and as required to
complete the system
Pressure Gauge
O 4" face dial, 1/4 NPT 30 no 6,600.00 990.00 7,590.00 227,700.00
Sight Glass
P 25mm diameter 30 no 1,430.00 214.50 1,644.50 49,335.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Gate Valve
B 1/2 inch diameter 15 no 748.00 112.20 860.20 12,903.00
Sectional Valve
C 32 mm diameter 15 no N/A - -
Check Valve
H 150 mm diameter 6 no 57,421.00 8,613.15 66,034.15 396,204.90
I 65 mm diameter 1 no 29,896.00 4,484.40 34,380.40 34,380.40
Fire-Department Connections
Pumps
O FP, 500 GPM, 175 PSI, 75 HP Motor, 1700 RPM, 1 set OSM 70,000.00 70,000.00
380V/3Ø/60Hz, Vertical Turbine, UL/FM complete
with controller
P JP, 40 GPM, 180 PSI, 10HP Motor, 3550 RPM, 1 set OSM 70,000.00 70,000.00
380V/3Ø/60Hz, Submersible Turbine, UL/FM
complete with controller
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Fire Extinguishers
E Conduct testing & commissioning of the system (The 1 item 190,000.00 190,000.00
contractor shall supply all necessary testing
instruments including consumables, test reports in
accordance with testing procedure required by Owner,
Designer and the Project Manager)
OTHERS
Mobilization / Demobilization 1 lot 120,000.00 120,000.00
F B.I. Welded Fittings (MECH) 1 lot 396,181.00 178,281.45 574,462.45 574,462.45
B.I. Screw Fittings (MECH) 1 lot 359,528.00 161,787.60 521,315.60 521,315.60
Valves & Imported Materials 1 lot 1,171,263.00 175,689.45 1,346,952.45 1,346,952.45
Pipe Hanger / Support 1 lot 646,800.00 291,060.00 937,860.00 937,860.00
Consumable Materials 1 lot 528,000.00 237,600.00 765,600.00 765,600.00
Electrical & Automatic Sprinkler Monitoring Panel (15-Zo 1 lot 206,800.00 93,060.00 299,860.00 299,860.00
Transportation Expense 1 lot 190,000.00 190,000.00
House Rent 1 lot 140,000.00 140,000.00
Warehouse 1 lot 80,000.00 80,000.00
Item Description Quantity Unit Materials Labor Total Unit Rate Amount
Page 2 of 4 1,904,336.90
Page 3 of 4 5,367,200.50
The quantities indicated hereunder shall be the Contractor's Guaranteed Maximum Quantities (GMQ's) and shall be
supplied by the Owner;
If the quantities of materials to be furnished by the Owner, as reflected in this schedule of GMQ's, fall short than the
Contractor's actual requirements, the cost of additional materials shall be borne by the Contractor. The additional
required materials will still be purchased by the Owner and all costs, including incidentals, shall be charged to the
Contractor;
GMQ's shall be inclusive of wastages due to cut length / dimensions.
The factors set-out in this schedule of GMQ's shall be used in the calculation of additive/deductive quantities for
variation orders, all subject to the evaluation and reconciliation with the Quantity Surveyor;
The Contractor shall also include on his Master Work Program the delivery requirement of the Owner supplied
materials for the timely completion of the Work;
The Contractor shall properly monitor all deliveries vs. consumption, and monitoring reports shall be submitted to
the Owner on a monthly or weekly demand basis;
The Contractor shall furnish the Owner a written request and delivery schedule of every Owner- supplied materials at
least one (1) month in advance prior to any actual installation or usage of the materials. Failure to do so, the Owner
reserves the right not to grant the time extension and/or cost impact;
If the quantities of materials to be furnished by the Owner, as reflected in this schedule of GMQ's, is higher than the
Contractor's actual requirements, the excess materials shall be become the property of the Owner.
The above GMQ's for rebars shall be based on commercial sizes, and include quantities for spacers,
chairs and other additional rebars as required by the Bid Documents;
The above GMQ's per rebar diameter size may be altered by the Contractor before or during
construction, provided that its resulting total tonnage shall not exceed the total GMQ tonnage
stipulated above, but only upon due consultation with and approval by the Owner.
PAGE 91 OF 91 GMQ