Documente Academic
Documente Profesional
Documente Cultură
(TWO METHODS)
1st Method: Making a bootable USB drive with the Windows utility program
DiskPart.
STEP 1.Enter Windows + r , type “diskpart” and press enter.
STEP 4. Select the volume of USB from the list. Using “select volume#”
STEP 5. Clean the USB Flash Drive. Type in the word “Clean” and hit Enter. It will delete all
files.
STEP 6. Create a primary partition on your USB Flash Drive. Run the command “Create
partition primary”. You will be welcomed by the message Diskpart succeed in creating the
specified partition.
STEP 7. Format the USB Flash Drive. Run the command “format fs=ntfs” and hit Enter.
Note: For small drives it will take only few minutes. For 64Gb USB Thumb Drives it may take hours.
So, be patient.
STEP 10. Final step. Choose one of the Windows Vista, 7, 8, 8.1, 10 etc. OS and copy the installation
files on your USB.
STEP 5. Once the Windows distribution and USB stick are selected, click “Next” and see the
WinUSB proposed option to create a Bootable USB drive. If there is enough free space, WinUSB will
prompt you to make it bootable without formatting as shown below in the screenshot on the left.
If there isn’t enough space, WinUSB will offer the following options:
Format the Drive
Cancel by clicking Back
Clear Space on the drive manually. (WinUSB will automatically detect the release of the
space and will propose to continue without formatting.)
STEP 6. Ok, now, when format option selected, just click the “Yes” button to start Windows 10
Bootable USB drive creation! The completion percentage will be displayed by the progress bar,
highlighted in the screenshot below.
STEP7. Once the process finishes, you’ll be greeted by the below popup.