Documente Academic
Documente Profesional
Documente Cultură
Introduction
B. Tech Graduate with Five+ years of experience in Transmission Planning and Optimization in INDIA,
IRAN, KSA (Kingdom of Saudi Arabia) with emphasis on BSC Optimization and Planning of SDH and OFC.
Innate innovator, with strong interpersonal, presentation and communication skills coupled with a desire to make
things happen.
I am currently working in IDEA cellular Ltd as Assistant Manager Transmission and looking after 3 region (West
Bengal, Assam, North-East since May-2009 till date.
Professional Experience:
Project: IDEA-Huawei, IDEA-Ericsson (GSM 2.75 G & upgradeable to 3G)
Profile: Transmission Hub Planner (Transmission Rollout and Optimization of network in4 circle)
− Preparing the BSC dimensioning and proposed the design of the target network with the
approval of customer
− Interact with the Vendor as a SPOC (Ericsson, Huawei) in individual meeting
− Preparing the Capex for fanatical year.
− Preparing BOQ for each phase OFC capex.
− Preparing Bandwidth access (For access Huawei RTN 620(R3 Upgradeable to R5)), BOQ for each
phase.
− Preparing Transmission BOQ for first two years.
− Preparing 3rd Redundant Media (BB CERAGON IP10R2) for Opex.
− Preparing the Equipment (HIGHER ORDER MUX OSN 7500, Upgrade from Metro 1000 to OSN
3500) planning.
− Interact with vendor for the proper BW utilization, Planning, Optimization of E1 augmentation
for BSC ATER (Optical & Electrical) protection.
− Capacity calculation for 2G, Ater, IU traffic accordingly plan for Backbone link using SRT-1F,
POI, &LL application.
− Maintenance of PCM plans for SDH & PDH route
paul.anindya@gmail.com
− Handling of PDH/SDH equipment in detail.
− Preparing the BOQ for Phase wise.
− Preparing the KLM plan for different SDH route.
− Deciding BSC boundary.
− Knowledge of Hybrid equipment like Huawei Optz620 RTN (R3, R5, Ceragon IP10R2, MUX (Huawei OSN
3500/7500,Metro 1000)/ link Engineering and E1 management for SDH as well as PDH link/ SDH
(CERAGON)/PDH technologies in detail
− Hands on experience of MAP INFO & Preparing Network Plan.
− Handling Map info (ver9.5) for microwave connectivity.
− R.L tools for path profile.
− PLANNING tool (Pathloss & Aircom Connect) for link budget calculation as well as doing the frequency plan
for GSM 1800 band (in both EDGE and non EDGE platform)
− Link plan and traffic plan for GSM cell (in both EDGE and non EDGE platform)
− Redundant backbone planning & taking in to consideration the interference issue and hi low violation issue.
− SNCP planning for Loop and Ring protection of sites
− Link engineering of sites/ BSC planning
− Regulatory activities for site and link clearance
− DCN planning.
− IP planning.
− Preparing the BSC dimensioning and proposed the design of the target network with the
approval of customer
− Interact with the customer (MTC-Zain) in individual meeting
− Preparing the NDD Element for different OFC route.
− Preparing BOQ for each phase OFC capex.
− Preparing the Equipment (HIGHER ORDER MUX for DWDM) planning.
− Interact with customer for the proper DWDM augmentation for BSC ATER protection.
− Capacity calculation for 2G & 3G (Abis, IUB), Ater, Iu traffic accordingly plan for Backbone link
using SRT-1F, POI, &LL application.
− Maintenance of PCM plans for SDH & PDH route
− Handling of PDH/SDH equipment in detail.
− Preparing the BOQ for Phase wise.
− Preparing the KLM plan for different SDH route.
− Deciding BSC boundary.
− Knowledge of SDH equipment like MUX(TELABS 6xxx and 8xxx series, )/ link Engineering and E1
management for SDH as well as PDH link/ SDH(NERA, CERAGON)/PDH technologies in detail
− Hands on experience of MAP INFO & Preparing Network Plan.
− Handling Map info (ver7.0, 8.0, 8.5, 9.01b) for microwave connectivity.
− R.L tools for path profile.
paul.anindya@gmail.com
− PLANNING tool (NOKIA NET ACT PLANNER) for link budget calculation as well as doing the frequency plan
for GSM 900 as well as GSM 1800 band (in both EDGE and non EDGE platform)
− Link plan and traffic plan for GSM cell (in both EDGE and non EDGE platform)
− Redundant backbone planning & taking in to consideration the interference issue and hi low violation issue.
− Metro hub planning for Loop and Ring protection of sites
− Link engineering of sites/ BSC planning
− TEMS (Ver: 2, 4.0, 5) tools coverage testing.
− Preparing the BSC dimensioning and proposed the design of the target network with the
approval of customer
− Interact with the customer(MTN-IRANCELL) in individual meeting
− Maintenance of PCM plans for SDH & PDH route
− Handling of PDH/SDH equipment in detail.
− Preparing the BOQ for Phase wise.
− Preparing the KLM plan for different SDH route.
− Deciding BSC boundary.
− Knowledge of SDH equipment like MUX(TELABS 6xxx and 8xxx series, )/ link Engineering and E1
management for SDH as well as PDH link/ SDH(NERA, CERAGON)/PDH technologies in detail
− Hands on experience of MAP INFO & Preparing Network Plan.
− Handling Map info (ver7.0, 8.0, 8.5, 9.01b) for microwave connectivity.
− R.L tools for path profile.
− PLANNING tool (NOKIA NET ACT PLANNER) for link budget calculation as well as doing the frequency plan
for GSM 900 as well as GSM 1800 band (in both EDGE and non EDGE platform)
− Link plan and traffic plan for GSM cell (in both EDGE and non EDGE platform)
− Redundant backbone planning & taking in to consideration the interference issue and hi low violation issue.
− Metro hub planning for Loop and Ring protection of sites
− Link engineering of sites/ BSC planning
− TEMS (Ver: 2, 4.0, 5) tools coverage testing.
This is a rollout project of BHARTI, West Bengal and Circle (India) that constitutes of swapping around 525
sites, rolling out 2100 new sites and redeploying around 525 swapped BTS.
− Maintenance of PCM plans for SDH & PDH route
paul.anindya@gmail.com
− Handling of PDH/SDH equipment in detail.
− Preparing the BOQ for quarter wise.
− Preparing the KLM plan for different SDH route.
− Deciding BSC boundary.
− Knowledge of SDH equipment like MUX/ link Engineering and E1 management for SDH as well as PDH link/
SDH/PDH technologies in detail/ LOS survey in different proposed sites/ LOS survey in different IBS (In
Building Solution).
− Hands on experience of MAP INFO & Preparing Network Plan.
− Handling Map info (ver7.0, 8.0, 8.5) for microwave connectivity.
− PLANNING tool (NOKIA NET ACT PLANNER) for link budget calculation as well as doing the frequency plan
for GSM 900 as well as GSM 1800 band (in both EDGE and non EDGE platform)
− Link plan and traffic plan for GSM cell (in both EDGE and non EDGE platform)
− Redundant backbone planning & taking in to consideration the interference issue and hi low violation issue.
− Metro hub planning for Loop and Ring protection of sites
− Preparing SACFA as well as GIS database for planned and ON-AIR sites/ WPC as well as INVOICE database
for planned and ON-AIR sites.
− Link engineering of sites/ BSC planning
− Installation and maintenance of GSM 900 based BSS (Base Station Sub System), GSM 900 based NOKIA
BSC (BASE STATION CONTROLAR) (BSC 300i) as a BSS ENGINEER.
As well as an OMC ENGINEER.
− Maintenance of NOKIA BTS and Transmission equipments/ NOKIA BSC and Transmission equipments/ ECI
MUX, TEJES MUX.
− Planning of BTS sites to gain most useful coverage from marketing point of view and handover continuity
keeping in view the LOS factor and chain or loop strategy.
− Installation of NOKIA BTS (BASE TRANSCEIVER SYSTEM), GSM Antenna, RF Cables, Microwave Antenna,
Power system etc.
− Commissioning of NOKIA BTS and making the sites ON AIR by assigning the E1 channel, bypassing others,
creating protection path, assigning TIME SLOTS for all TRANSCEIVERS in Traffic Manager.
− Making the redundant path for the particular sites & for the POI (POINT OF INTERCONNETIVITY) s in
Leased E1.
− Preparing Particular E1 from MUX to BSC and from BSC to Krone Block for particular sites, POI, TCSM.
− Shifting traffic from NOKIA backbone to NEC link. As well as vice versa.
− Creating the sites (BTS both EDGE & NON EDGE) in the database in NOKIA OSS in according order &
Creating TCSM.
− Handling of OSS (HAMMING BIRD & CTRIX software)& alarm deletion from the server(manually)
Creating CELL INFO DISPLAY via software & GPRS link in server
Skills:
• CTRIX CONNECTIVITY
• HUMMING BIRD CONNECTIVITY
• Theoretical knowledge of 3G-Nokia.
• Hand on experience in REFLECTION,TANG
• Hand on experience in NOKIA BTS MANAGER
• Hand on experience in NEC PASOLINK
paul.anindya@gmail.com
• Hand on experience in TEL-LABS 6xxx, 8xxx series
• Hand on experience in NERA SDH Radios.
• Hand on experience in ECI NMS.
• Analyzing the Nokia NET ACT PLANNAR for the ling budget analysis
• Nominal Planning
• Hand on experience in GIS Tool.
• O&M of Nokia BSC and BTS
• Technical Audits for performance
• Providing solutions to various TX as well as BSS related issues
• Site surveys
• Commissioning of Nokia BSC, BTS.
• Good knowledge of Nokia OSS.
• Worked independently on NOKIA systems i.e. BSC, TCSM and BTS.
• Proficient in MAPGRID, R-L TOOL.
• Proficient in MICRO SOFT VISIO.
• Hand on experience in MAPINFO (Ver 7, 8, 8.5).
• Changed Delivery Implementations in the BSC and upgrading the BTS software.
• Good Understanding Unix commands.
• Training from B.S.N.L (Bharat Sanchar Nigam Ltd.) (Cell one technical center Kolkata) on” General
Networking Concept on GSM” in Ericsson equipment.
• 3 day Training as well as a workshop while working in HUTCH in PDH basic.
• 2 day Training by NOKIA while working in HUTCH in OSS.
• 3 day Training, working in ADA CELLWORKS in Transmission network planning.
Education:
B.Tech - Bachelor of Technology ECE – Electronics & Communication
Degree Percentage: 79.99% (Distinction.) Batch: 2001-2005 B.P.P.I.M.T.(UnderW.B.UTECH)
W.B.B.H.S.E (XIIth) Mitra Institution Main, Kolkata, India
Percentage: 70.4%
W.B.B.S.E. (Xth) ST.Paul’s High School Kolkata, India
Percentage: 74%
paul.anindya@gmail.com
References:
Personal Details:
paul.anindya@gmail.com