Documente Academic
Documente Profesional
Documente Cultură
25 and 42 Bar,
FK 1230 (FK-5-1-12)
Clean Agent System
Discharge Nozzle
MS Piping
Audio Alarm
COMMUNICATIONS
Electronic communication are so portable, reliable
and instantaneous that they are taken for granted.
The equipment that provides such communication is
heavily used and could overheat. Data management
and communication hubs could be prone to fire.
Area of Applications :
• Switching Equipment.
• Power & Battery Area.
• Cell Sites.
• Standby Engine Area.
3
System Components
NFPA 2001, Requirements For Minimum FK1230 (FK-5-1-12) Fire Suppression Agent
Values
FK1230 (FK-5-1-12) agent compiles with NFPA Standard 2001
Class A Class A Class C Class B
Agent
MEC Design Design Design
standard on “Clean Agent Fire Extinguishing Systems.” EPA SNAP
Program (Significant New Alternate Policy)
FK-5-1-12 3.5 4.5 4.5 5.9
The FK1230 is classified as suitable for use in occupied areas and
has no ozone depleting potential (ODP)
Environmentally Friendly
Description
FK-5-1-12
Description FK1230 systems reach extinguishing levels in 40 seconds or less,
(FK1230)
stopping ordinary combustible, electrical, and flammable liquid fires
Ozone Depletion Potential (ODP) 0.0 before they can cause significant damage. That’s the fastest fire
Global Warming Potential (GWP) 1 protection available, When a fire is extinguished this quickly, it means
less damage, lower repair costs, and an extra margin of safety for
Atmospheric Lifetime (Years) 5 DAYS people. It also means less downtime and disruption of business.
SNAP (Yes / No) YES Physical & Chemical Properties
Empirical formulae.................................................CF3CF2C(O)CF3)2
IUPAC Designation...................Dodecafiuoro-2-methylpentan-3one
ASHRAE Designation.............................................FK-5-1-12
Molecular Weight....................................................316.04
Boiling Point at 1 Atm............................................49.2 °C (120.6 °F )
Freezing Point..........................................................-108.0⁰C ( -162.4°F )
No Observed Adverse Effect Level.....................10 %
Lowest Observed Adverse....................................>10%
The cylinders are charged with FK1230 and super pressurized with
dry nitrogen at a total pressure of 360 psig (25 bars) or 610 psig (42
bars) at 70°F (21°C) to assure rapid discharge at temperatures as
low as 32°F (0°C) storage temperature.
Flexible hoses are used to The Flexible Actuation hose is The MS Straps or brackets are
connect the agent storage ¼" stainless steel wire braided used to mount the cylinder in
cylinders to the manifold in hose. It is used in multiple vertical position.
multiple cylinders arrangement. cylinder bank systems to
Flex hoses are made out of connect pressure activated
Reinforce Rubber Hose. Hose devices to the system.
is available in 1.1/2”, 2" and 3"
size.
Electric Cum Manual 1-1/2” Manifold Check 180⁰ & 360⁰ Degree Nozzle
Actuator Valve
The Electric control head is In case of multiple cylinder FK1230 Nozzles are available
an electromechanical device arrangements where the in two discharge patterns 180⁰
mounted on the master master and slave cylinders and 360⁰ degree.
cylinder actuation port. The share a common manifold or
Electric control head gets are connected in main/reserve Discharge nozzles have an
actuated/triggered only arrangement, a manifold NPT female pipe thread for
after receiving a 24 VDC, 2 check valve becomes a must. attachment to the discharge
amps signal from the fire The manifold check valve piping network. The nozzles are
alarm panel or other similar prevents backflow from the selected basis of the hazard to
source. Once actuated it will manifold in case the system be protected against. It helps to
trigger the master cylinder be inadvertently discharged. achieve the best flow rate and
and eventually open up Manifold check valve to be distribution of FK1230 in the
the discharge outlet of the installed in the vertical position protected hazard area
cylinder. It also houses a only. Please refer arrow mark
manual release plunger which during installation. Part number/orifice for nozzle
can be used to manually will be generated by FK1230
trigger the cylinder actuation fire suppression system design
port. software.
The actuator also has a
supervisory switch. The
function of the supervisory
switch is to provide the signal
to control panel in case the
actuator is demounted or
removed from cylinder valve.
This makes it an important
feature as described in NFPA
5
System Components
Pressure Operated Control Manifold / Piping Agent Master Cylinder Adapter Kit
Head Discharge Pressure Switch
In multiple cylinder system, The discharge pressure switch The master cylinder adapter
a pressure operated control is activated by pressure from kit provides the means of
head is mounted on each slave the agent during discharge connecting the flexible
cylinder. On the actuation of and can be used to signal actuation hose to the master
electric control head mounted an control panel that the and slave cylinder assembly.
on master cylinder. Pressure system has discharged. The This enables system to actuate
from the master cylinder is pressure switch incorporates the Slave Cylinder.
transferred to each pressure a reset button which has to
operated control head. Which be depressed following a
enables it to pneumatically discharge.
actuate the cylinder it is
mounted on.
B. DISCHARGE NOZZLE 369 Ltr. (912 lb.) DOT Cylinder With 3" Valve Assembly, 25 Bar 12-250912-000
Type : 180 and 380 Degree
Material of Construction : Brass
Thread : NPT female thread Accessories for 25 & 42 Bar System
Size : 15NB, 20NB, 25NB, 32NB, 40NB & 50NB Nomenclature Part Number
(1/2", 3/4". 1", 1-1/4", 1-1/2" & 2")
Electric cum Manual Actuator (Electric Control Head) 14-000031-000
Nozzle Coverage Area : 13M X 13M ( 42.65 ft x 42.65
ft) Pressure Operated Control Heads (Pneumatic Actuator) 14-000032-000
1-1/2” Flexible Discharge Hose 14-000001-000
C. FLEXIBLE DISCHARGE HOSE 2” Flexible Discharge Hose 14-000002-000
Material of Construction : Reinforced Rubber Hose. 3” Flexible Discharge Hose 14-000003-000
Size : 40NB (1-1/2"), 50NB (2") and 80NB (3") ¼” Flexible Actuation Hose 14-000004-000
Master Cylinder Adapter Kit 14-000050-000
D. ELECTRIC CONTROL HEAD
Manifold / System Supervisory Switch 14-000081-000
Operation : Electrically and Manually by Manual
Plunger 1-1/2” Manifold Check Valve 14-000060-000
Operating Voltage : 24 VDC 2” Manifold Check Valve 14-000061-000
Operating Current : 2.0 A 3” Swing Type Manifold Check Valve 14-000062-000
Environmental Criteria : Indoor / Dry use only 360 Degree Nozzle 15-000001-xxx
180 Degree Nozzle 15-000002-xxx
Brass Male Tee 14-000051-000
Brass Male Elbow 14-000052-000
7
For more information
Clean Agent Extinguishing Unit
www.cryptzo.net