Sunteți pe pagina 1din 1

OPAGEL CMT

Scope AVEBE B.A.


Building

Description OPAGEL CMT is a pregelatinized potato starch ether. AVEBE-weg 1


9607 PT Foxhol
The Netherlands
Appearance Creamish powder Website: www.avebe.com

Requirements

Moisture content ≤70 mg/g

Viscosity 500 ... 1500 mPa.s

pH 9.0 ... 11.0

Sieve analysis ≤ 50 mg/g on 500 micrometres


50 ... 400 mg/g on 250 micrometres

Bulk density ~ 600 kg/m3

Test methods

Moisture content ISO 1666

Viscosity Concentration : 30 g product in 30 g ethanol and 290 g demineralized


water
Stirring : at n = 450 min-1 for 5 minutes with a 3-bladed propellor
stirrer (beaker ø 75 mm)
Conditioning : at 25 °C for 30 minutes

Product Specification
Viscosity meter : Brookfield RVF; spindle 3, n = 20 min-1
Reading after 1 minute.
Calculation : The final result of viscosity is calculated as:
(measured viscosity + 641.16) / 2.0214

pH The solution obtained with the viscosity test is measured.

Sieve analysis 100 g are sieved mechanically over 500 µm and 250 µm for 10 minutes.
AVEBE method: CA-05-005

Bulk density ISO 697

Storage

Store inside, cool and dry, in sound and well closed bags.
Recommended storage time: not longer than 1 year.
It is advised however, to keep the storage time as short as possible, because the moisture content
may increase gradually.

Page 1 of 1 page
ref.no. 120289/version 06
issued April 01, 2005

S-ar putea să vă placă și