Documente Academic
Documente Profesional
Documente Cultură
1
Introduction:
This Document explains the procedural steps for isolating PLB emergency lights circuit.
Purpose:
The procedure for the isolation of PLB emergency lighting circuit is developed for the TKAS team lead
technicians; so that during maintenance they can easily isolate the desired circuit.
2
Procedure for Deactivating PLB Emergency Lighting Circuit
Step 1:
3
Step 2:
Step 3:
Scroll Down using down key on key pad & Select “Circuit setup“ by pressing OK button on Key
pad
Step 4:
Step 5:
Now select desired PLB Circuit ( PLB L1 ) from “service” button on module.
4
Circuit name will appear on the LCD screen.
Now blinking red indication lights on module will indicate that circuit is isolated.
Step 6:
To isolate the PLB L2 circuit; Scroll right and select desired circuit and repeat step 5 & 6.
5
Procedure for Activating PLB Emergency Lighting Circuit
Step 1:
Step 2:
6
Lighting controller Panel Location
Lighting control panel is located in Electrical rooms near PLB rotunda on Apron level.