Documente Academic
Documente Profesional
Documente Cultură
V0.0 /0217v
1
2
CCTV-205
Manual de instrucciones
Antes de utilizar el producto, lea cuidadosamente este instructivo para evitar cualquier
mal funcionamiento. La información presentada sirve únicamente como referencia sobre
el producto. Debido a actualizaciones pueden existir diferencias.
Consulte nuestra página web www.steren.com para obtener la versión más reciente de
este manual.
PRECAUCIONES
• Este producto no está destinado para ser utilizado por personas con capacidades
diferentes, a menos que sean supervisadas o instruidas por una persona responsable
de su seguridad.
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es
posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este
equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pue-
da causar su operación no deseada.
3
ÍNDICE
PARTES .................................................................5
PREPARATIVOS .................................................................5
MONITOREO ...............................................................15
Monitoreo remoto ...............................................................15
INSTALACIÓN ...............................................................18
4
PARTES
Puerto de alimentación
micro USB
Lente
Infrarrojos LED
(visión nocturna)
Altavoz
*Botón de reinicio
Indicadores
LED
5
PREPARATIVOS
6
INSTALACIÓN DE LA APLICACIÓN
Para gestionar y monitorear el funcionamiento de la cámara, debe instalar una
aplicación.
1. Ingrese a la tienda de aplicaciones de su dispositivo (Android/iOS), y descargue
V380.
Esta aplicación no es propiedad de Steren; la empresa no se hace
responsable por su funcionamiento ni actualizaciones
Las imágenes presentadas corresponden a un dispositivo con sistema operativo iOS y aplicación
V380 (5.1). Los iconos, la configuración de la interfaz y las funciones pueden variar según la
versión de la aplicación y el sistema operativo utilizados.
7
(Continuación de Instalación de la aplicación)
Una vez hecha esta configuración, aparecerá la pantalla principal para elegir el modo
de conexión de la cámara.
OPCIONES DE CONEXIÓN
La cámara tiene 2 formas de vincularse con el dispositivo móvil. Elija una opción de
conexión, y diríjase a la sección correspondiente de este manual para ver el procedi-
miento.
Página 9 Página 12
8
OPCIÓN 1: Conexión Wi-Fi
1. Conecte el dispositivo móvil a una red 3. Introduzca la contraseña de la red Wi-Fi
Wi-Fi. a la que está conectado el dispositivo
2. Ingrese a la aplicación, y elija la opción móvil, y presione Next.
WiFi Smart Link.
Asegúrese de que
la cámara esté
conectada a la
energía eléctrica
La cámara emitirá
un mensaje: “Wi-
Fi connected”
indicando que se
está conectando.
9
La cámara emitirá el mensaje de voz:
Wi-Fi connected
IMPORTANTE
En algunos dispositivos es necesario ingresar el número de identificación de la
cámara para completar la vinculación Wi-Fi. Siga este procedimiento:
ID:37364261
10
3. Seleccione la opción Lan Search, y 4. Seleccione el dispositivo encontrado y
espere hasta que finalice la búsqueda. elija Add device (s).
11
OPCIÓN 2: Conexión directa (punto de acceso)
1. Con la cámara conectada a la corriente eléctrica presione una vez el botón
Reset. Espere unos segundos hasta escuchar el mensaje de voz: “Access point
established”.
Access point
established
12
2. En el dispositivo móvil ingrese a las 3. Una vez establecida la conexión a
opciones de configuración Wi-Fi. Busque la red Wi-Fi ingrese a la aplicación, y
y seleccione la red cuyo nombre está con- seleccione el icono +
formado por el prefijo “CCTV” y el número
de identificación de la cámara. Ejemplo:
CCTV37364261
CCTV37364261
4. Elija la opción Device Linked o Add 5. Seleccione Lan Search y espere hasta
Network Device (dependiendo del siste- que finalice la búsqueda.
ma de su teléfono).
13
6. En la lista de dispositivos encontrados seleccione Add device(s).
¡Conectado!
14
MONITOREO
Una vez establecida la conexión aparecerá la pantalla principal donde podrá editar
las opciones del dispositivo conectado y empezar a monitorear desde el dispositivo
móvil.
Videos y tutoriales de la
Agregar dispositivos
aplicación
Visualización y
grabación en tiempo
real
Historial de alertas
Eliminar dispositivo
Modificar nombre Activar/desactivar
y contraseña de la alertas
cámara
Reproducción Configuración
Monitoreo remoto
Cuando se encuentre fuera de la red local:
2. Abra la aplicación y espere unos segundos hasta que la cámara aparezca en línea.
15
En la pantalla principal presione para visualizar en tiempo real.
Activar/desactivar
sonido
Por su seguridad, se recomienda
crear una contraseña
Girar vista
Activar/desactivar Grabar
micrófono
CONFIGURACIÓN DE ALERTAS
Esta función sólo está disponible en modo de conexión Wi-Fi
Recibir notificaciones
Cuando la cámara detecte movimento enviará una notificación al dispositivo móvil.
Active o desactive las notificaciones de la siguiente manera:
1. En la pantalla principal de monitoreo 2. Active o desactive las opciones de su
ingrese al submenú (More) y selec- preferencia.
cione la opción Alarm Notification. (o
AppNotification).
16
Otras opciones de alerta
1. Ingrese al submenú y seleccione 2. Active las opciones de su preferencia y
la opción Alarm Settings. presione Save para guardar los cambios.
Notificación en el
dispositivo móvil
Activar sensor de
movimiento
Sonido de alarma
en la cámara
Idioma de los
mensajes de voz
CONFIGURACIÓN GENERAL
Ingrese al submenú para editar preferencias generales en la cámara.
ID del dispositivo
Información del modo de
conexión establecido
Configuración de alarma
Opciones de grabación
Fecha y hora
Configuración de IP
Información de la aplicación
17
VISUALIZACIÓN DE ARCHIVOS
Para ver las fotografías tomadas desde la aplicación, diríjase al submenú (More) e
ingrese a la opción Álbum. Estos archivos se almacenan en el dispositivo móvil.
Si desea ver los archivos de la tarjeta micro SD, debe extraerla para visualizarlos en
una PC.
INSTALACIÓN
Elija una superficie sólida y estable para instalar la cámara. Puede colocarla sobre una
superficie plana (A) o fijarla a un muro con los tornillos (B).
18
ESPECIFICACIONES
Alimentación: 5 V - - - 1,6 A
Protocolo: TCP/IP
Convertidor CA/CC
Salida: 5 V - - - 1,6 A
19
Producto: Cámara CCTV Wi-Fi para monitoreo por Internet
Modelo: CCTV-205
Marca: Steren
Esta póliza garantiza el producto por el término de un año en todas sus partes y mano de obra y tres meses en la batería contra cualquier
defecto de fabricación y funcionamiento a partir de la fecha de entrega.
CONDICIONES
1.- Para hacer efectiva la garantía, presente esta póliza y el producto, en donde fue adquirido o en Electrónica Steren S.A. de C.V.
2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al consumidor. Los
gastos de transportación serán cubiertos por el proveedor.
3.- El tiempo de reparación en ningún caso será mayor a 30 días,contados a partir de la recepción del producto en cualquiera de los sitios
donde pueda hacerse efectiva la garantía.
4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como hacer válida esta garantía es en cualquiera de
las direcciones mencionadas posteriormente.
CENTRO DE ATENCIÓN
A CLIENTES
01 800 500 9000
20
21
CCTV-205
IP CAMERA
V0.0 /0217v
22
CCTV-205
Instruction manual
Before to use the product, please read carefully this manual to avoid any malfunction.
The info in this manual is shown as reference.
Due to updates can exist differences. Consult our website www.steren.com to obtain the
current version of this manual.
CAUTIONS
• Any reparation not authorized may cause malfunction and avoid the warranty.
• This device cannot be used by people with different abilities, unless they have pre-
paration and supervision.
The operation of this equipment is subject to the following two conditions: (1) it is
possible that this equipment or device may not cause harmful interference and (2)
this equipment or device must accept any interference, including interference that
may cause its undesired operation .
23
INDEX
PARTS ...............................................................25
INSTALLATION ...............................................................38
24
PARTS
Micro SD slot
Microphone
LED infrarred
Speaker
*Reset button
LED indicator
25
BEFORE USING
Insert a micro SD memory card to Connect the micro USB cable and the
store videos and photos. adapter to an outlet.
Waiting for
Wi-fi Smart Link to
The camera begin to record automa-
configuration
tically when connect it to the power
supply.
26
APP INSTALLATION
To manage the camera work, you must install the app.
1. Enter to the app store of your mobile device and download V380 app.
This app is not property of Steren; the company is not responsible for the the
working or the updates.
2. Open the app. Select Local option. 3. Choose the area (North America).
The showed images correspond to an iOS device and V380 (5.1) app. The icons, interface and the
functions may vary depends the app version and the OS of the used device.
27
(Continued the App installation section)
Once make the configuration, in the screen appears the connection mode of the camera.
CONNECTION OPTIONS
The camera has 2 ways to pairing with the mobile device. Choose a connection option
and refers to the correspond section in this manual to see the corresponding process.
Page 29 Page 32
The camera and the mobile device The camera generates its your own
is connected at the same modem network to connect with the mobile
network device
28
OPTION 1: Wi-Fi connection
1. Connect your Smartphone to a Wi-Fi 3. Enter the password of the Wi-Fi
network. network and press Next.
2. Enter to the app and choose WiFi
Smart Link option.
29
The camera emits a voice message:
Wi-Fi connected
In case that the connection failed, press and hold the Reset button until the camera
emits the voice message: “Restore factory default settings”. Then repeat the
process.
IMPORTANT
1. In the main screen select Add Manua- 2. In the Device ID field enter the ID
lly or Add Network device (depends on number that it is localized it in the rear
the used device) label of the camera, also you can scan the
QR code.
ID:37364261
30
3. Select Lan Search, and wait until the 4. Select the founded device and select
search finish. Add device (s).
31
OPTION 2: Direct connection (access point)
1. In the camera press once the Reset button. Wait for a few seconds until you can
hear the voice message: “Access point established”.
Access point
established
If you can’t listen this message, press and hold the Reset button until the camera
emits the message: “Restore factory default settings”. Then, press this button again.
32
2. In the device enter to the Wi-Fi settings 3. Once estabilished the Wi-Fi connection
options. Search and select the network enter to the app and press the + icon.
with the prefix “CCTV” and the ID num-
ber. Example: CCTV37364261
CCTV37364261
4. Choose Device Linked or Add ne- 5. Select Lan Search and wait until the
tworked device in some devices. search is over.
33
6. In the found devices list select Add device(s).
Connected!
34
MONITORING
Once established the connection will appear the main screen where you can edit
the options of the connected device and start to record and monitoring from your
mobile device.
Alert history
Delete device
Edit the name and Activate/deactivate
password of the alerts
camera
Playback Settings
Remote monitoring
When you’re out from the local network:
2. Open the app and wait few seconds until that the camera appears online.
35
In the main screen press to display in real time.
Functions not
available Take a photo
Lens orientation
Microphone Recording
ALERT SETTINGS
This function is only available in Wi-Fi mode
To receive notifications
When the camera detects motion, will send a notification to the mobile device. Activate
or deactivate the notifications as following:
1. In the main screen of monitoring enter 2. Activate or deactivate the options that
to submenu and select Alarm you want.
Notification. (or AppNotification)
36
Another alert settings
1. Enter to submenu and select 2. Activate the options that you want and
Alarm Settings. select Save.
Notification in the
mobile device
Alarm sound
Voice message
language
GENERAL SETTINGS
Enter to submenu to edit the general settings of the camera .
ID device
Network settings
Alarm settings
Recording settings
IP settings
App info
37
FILE PREVIEW
To see the photos taken from the app, choose and enter to Album, this files are
stored in the mobile device.
If you want to see the files stored in the SD card, you must remove it from the camera
and place it in your PC.
INSTALLATION
Choose a stable and solid surface to fix the camera. You can place it into a flat
surface (A) or fixed it over the wall (B).
Take into account the length of the power cord when doing the installation
38
SPECIFICATIONS
Protocol: TCP/IP
AC/DC converter
39
Product: IP CAMERA
Number part: CCTV-205
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship and
materials to the original purchaser for one year and three months in the battery from the date
of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or
package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warran-
ty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper safe
keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
40
41
42