0 evaluări0% au considerat acest document util (0 voturi)
226 vizualizări2 pagini
The AB International Professional Series 9620B is a two channel stereo amplifier that can deliver 850 watts per channel into 8 ohms or 2000 watts into 2 ohms. It has individual channel level controls, an 11 LED VU display, balanced 1/4" jack and XLR inputs, and can be configured for stereo, parallel, or bridge mode. The 9620B employs negative feedback and protection circuits to control distortion and prevent damage from overheating or DC conditions.
The AB International Professional Series 9620B is a two channel stereo amplifier that can deliver 850 watts per channel into 8 ohms or 2000 watts into 2 ohms. It has individual channel level controls, an 11 LED VU display, balanced 1/4" jack and XLR inputs, and can be configured for stereo, parallel, or bridge mode. The 9620B employs negative feedback and protection circuits to control distortion and prevent damage from overheating or DC conditions.
The AB International Professional Series 9620B is a two channel stereo amplifier that can deliver 850 watts per channel into 8 ohms or 2000 watts into 2 ohms. It has individual channel level controls, an 11 LED VU display, balanced 1/4" jack and XLR inputs, and can be configured for stereo, parallel, or bridge mode. The 9620B employs negative feedback and protection circuits to control distortion and prevent damage from overheating or DC conditions.
The AB International Professional Series prevents an over-temperature condition.
9620B is a two channel stereo amplifier. Other features include dual two speed This compact (three rack unit) instrument temperature actuated DC fans, “ Soft Clip” features individual channel level controls, 11 speaker protection circuitry, selectable input LED vu display with clip indication, 1/4” sensitivity, and a fully modular construction jack inputs (balanced), XLR inputs for service accessibility. (balanced), ground lift switch, and a Stereo / The AB International Model 9620B features Parallel / Bridge switch. The 9620B delivers the “Logic Operated Gated Output” supply 850 Watts per channel into 8 Ohms, 1500 system. Dual tri-level supplies that gate the Watts per channel into 4 Ohms, and 2000 operating voltages around the output Watts into 2 Ohms 20Hz-20KHz at .1% waveform power high current, fully distortion. complimentary output stages. This is used to control and eliminate unused and inefficient The 9620B employs only 20dB of negative headroom. feedback to reduce forward transfer distortion components to minimum levels. The 9620B operates from l00-240V 50- VI energy limiters are incorporated for 60Hz AC mains and measures 5 ¼” high short- circuit protection and a thermal sensor (three rack unit), 19” wide and 16 ½”deep. Type: Two channel amplifier Slew Rate: Closed-loop response greater than 40V per Continuous 850w into 8 Ohms microsecond Power Output 1500w into 4 Ohms Crosstalk: -80dB Per Channel 2000w into 2 Ohms Gain: 39dB 20Hz to 20Khz: 3000w 8 ohms Bridge Mainframe 4000w 4 ohms Bridge Power Toroidal transformer Supply: 4EA (26,000uf) capacitors
Frequency Turn-On Delay: 3 sec., solid-state actuated
Response: +/- 0.25dB 20-20kHz Power AC Mains- 100-240VAC Distortion: No more than 0.1% THD or Requirements: 50/60Hz@32A/16A TM 0.01 to rated output. Hum & Noise: 101 dB below rated output Thermal Thermal sensor activates (unweighted, 20kHz band- Protection: channel shutdown if an width) overheating condition exists Input Sensitivity: 1.0V RMS for rated output DC Protection: DC sensor activates channel (selectable) .775, 1.0, 1.5V shutdown if DC condition Input Connectors: 1/4” phone jack (balanced) exists, Soft clip protection XLR (balanced) Neu Combo XLR Male parallel out. Heatsink and Dual speed fans providing Output Connect: 5-way binding posts Cooling: extra power handling (Speakon Optional) utilizing massive heatsink Control & (Front panel) AC mains extrusions Indicators: power breaker, power on Construction: 14-gauge cold-rolled steel LED, level controls, and with 11-LED vu displays 1/4” heavy aluminum front (Rear panel) ground lift panel switch, Dimensions: Slim line 5 1/4” height, 19” stereo/bridged/parallel switch standard rack mount width, 16.5” depth overall (less Damping Factor: 1000:1 at 1kHz handles) Unit Weight: 63 lbs (28.18 kg) Shipping Weight: 69 lbs (30.87 kg)
AMPLIFIED DESIGN INT’L Mfr of AB INTERNATIONAL Products
1830-6 Vernon St., Roseville, CA 95678 Phone (916) 783-7800 Fax (916) 784-1050 * Website http\\www.abamps.com * e-mail sales@abamps.com 09/02