Documente Academic
Documente Profesional
Documente Cultură
SIX LANING
ROW
Minimum 60 m should be available. Would acquire addition land required if any. Where the alignment of 6-lane
Highway is to be retrofitted on to existing highway, the details of ROW width on LHS and RHS from center line of
existing carriageway(s) at 50 m intervals shall be provided to the Concessionaire in Schedule 'A' of the Concession
Agreement.
3.5m
MEDIAN Raised/Depressed
I. RT Wall with Parapet is provided on Valley side, the earthen shoulder may not be provided.
II. RT/RE Wall on either side shall be abutting the paved shoulders & shall have crash barriers on top.
ROADWAY WIDTH
The width of roadway shall depend upon the width of carriageway, shoulders and the median.
On horizontal curves with radius up to 300 m, width of pavement and roadway in each carriageway shall be
increased as per
WIDTH
The roadway width of service road shall be minimum 10 m. In built-up areas where separator (as
per para 2.15 of this Manual), between main carriageway and service road; and RCC/Cement
Concrete lined drain-cum-footpath on ROW side are provided, no earthen shoulder shall be
provided for service road. The minimum width of paved portion of the service road shall be 7 m.
If required,
PARKING BAYS