Documente Academic
Documente Profesional
Documente Cultură
* Digital indicating PID temperature control FORZA Optional Mass Flow Controller arrangement:
maintains
. ±0.1°C stability Traditional Liquid Baths have only float-in-tube flow meter
*Temperature range of 40° to 250°C (Rotameter), Where FORZA Individual Tube heater baths
Supplied with Mass flow Controller (MFC) for each comes with Mass flow controllers (MFC). Traditional
test position Rotameters are typically affected by upstream and down
*Over Temperature safety cut off stream pressure changes and will need tweaking almost once
*Each position have independent heaters, sensors, a day to maintain proper flow during a long-term test. But the
special insulation, temperature control and high Mass Flow Controller (MFC) will provide a rock steady flow
temperature safety cut-off rate all time.)
*Unit is designed to operate all position at same
temperature or at different temperature as desired Individual Tube heater Apparatus eliminate the need for
by the client with specific attention to be able to expensive and hazardous bath mediums, which benefits
maintain large differential temperatures position to laboratory safety, health, environmental, and maintenance
position. issues plus tighter temperature stability and the ability to
*When position are unused they may be set to low operate each test position individually and at same
temperature to save energy temperature as well as different temperature as desired by
the client which saves energy.