Documente Academic
Documente Profesional
Documente Cultură
Previous Screen
Product: EXCAVATOR
Model: 345C EXCAVATOR PJW
Configuration: 345C L Hydraulic Excavator PJW00001-UP (MACHINE) POWERED BY C13 Engine
i02387581
Removal Procedure
NOTICE
2. Move the fuel shutoff valve to the OFF position. Refer to Operation and Maintenance Manual,
"Fuel Tank Shutoff and Drain Control".
Illustration 1 g01191947
Illustration 2 g01191948
4. Disconnect hose assemblies (4) and (6). Disconnect harness assembly (3). Remove nuts (2).
Remove engine electronic control (5).
Installation Procedure
Illustration 3 g01191948
1. Position engine electronic control (5). Install nut (2). Connect harness assemblies (3).
2. Tighten the bolts of harness assembly (3 ) to a torque of 6 ± 1 N·m (53 lb in). Connect hose
assemblies (4) and (6).
Illustration 4 g01191947
4. Move the fuel shutoff valve to the ON position. Refer to Operation and Maintenance Manual,
"Fuel Tank Shutoff and Drain Control".
5. Move the battery disconnect switch to the ON position.
Copyright 1993 - 2019 Caterpillar Inc. Thu Aug 22 01:51:20 UTC+0530 2019
All Rights Reserved.
Private Network For SIS Licensees.