Documente Academic
Documente Profesional
Documente Cultură
The Electrocooler electric air conditioning installation for Porsche 911 is a complete update to the air
conditioning and ventilation for the Porsche 911 models 1974 to 1989.
The kit is a total redesign of the 911 A/C system, with additional improvements to the fresh air blower
unit and warm air distribution.
Classic Retrofit recommends our 175A unit, the main advantage being the high idle
output (75A) which will enable the system to run full time in traffic.
Updating the alternator also requires that the wiring can take the extra current. The
wire from the alternator to the starter solenoid must be uprated to 170A 25mm2 wire
along with the alternator ground to the engine case. We provide the cable set with all
our uprated units.
If you have a 964 or 993 based engine you have a 115A alternator but it still requires
you to check the wiring is up to spec. E.g. No good having a 115A alternator with a
1974 wiring harness.
We also offer a 240A Alternator for 964 and 993 engines. This produces over 100A at
idle compared to the 115A which only makes 40A.
This is Classic Retrofit's upgraded high-output
alternator for classic Porsche 964 and 993s.
Tested at over 145A* amps on the standard 964/993
pulley and belt and with a simple installation
process, this UK-manufactured upgrade is the
highest output alternator available for your Porsche
964/993. The idle output is in excess of 100A!
DIMENSIONS 24 × 12 × 10 in
LUMENS 2900
KELVIN 5800K
DRL None
TURN
None
SIGNAL
WARRANTY 5 Years
The base model RAVEN Silver is a sleek, elegant yet simple design that pairs well with most paint colors. Each fixture features the latest in high output DOT/ECE approved Bi LED optics
resulting in a sharp, bright and defined beam pattern. All fixtures are pre-leveled for your convenience and Installation takes 15 mins to complete. The RAVEN Silver is handcrafted in our
signature quilted aluminum and parts are professionally coated in the same finishes / colors as Fifteen52‟s Outlaw series wheels. Our H4 styled lenses are double coated with a specially
designed epoxy process known as “Hard Coating”. Commonly used in the Aerospace industry, this special coating is very durable, will withstand numerous road conditions, will not scratch
easy and most of all, maximizes clarity. Better than glass, Its use makes each lens virtually unbreakable and clean even when the vehicle itself is dirty thanks to its antistatic properties. Unlike
standard plastic type lenses where constant polishing is required, this coating is safe to clean with any standard non-abrasive cleaning solutions such as Windex and will last for many years to
come.
All RAVEN series fixtures are a direct plug and play, meaning there are no wires to run, components to mount, or holes to drill. We offer free installation at our shop! A trained professional can
install, and have you on the road in no time. Your set also includes a specially designed storage pouch that safely holds your original OEM fixtures or your new ones, should you decide to
switch them out.
Stuttgart Classica Mirrors
A 95mm round convex mirror allows great rear view vision which are fully adjustable from inside the car.
These mirrors are supplied with the quarter light window pre-drilled with a hole.
Description
Set of 2 hinges (right and left) made from ball burnished, satin finished solid aluminium fit for Porsche 911 / 964 / 965
/ 993 front hoood (from model year 1965 - 1998).
Price per set (2 pieces (right and left) ).
The hinges are self made in the style of the Singer Porsche (smaller unevenness in the area of the weld seams and
milling are due to production and can therefore not be excluded and are not a defect or reason for complaint). They
are handmade from solid aluminium material and ball burnished (very finely satined surface with a satin matt
shine). They are very high quality and an optical highlight for any vehicle. The hood hinges are simply exchanged for
the original hinges.
Fits all front hoods / bonnets for Porsche 911 / 964 / 965 / 993 (from model year 1965 - 1998).
AUGMENT WHEEL COMPANY
The Campy Sport pays homage to the original, but unlocks wide fitments, low ET and multi-finish possibilities.
Unlike the Campy Narrow and Campy Wide (which are 2pc designs utilizing a front forging) the Campy Sport is a true 3pc wheel
which can be built in virtually any size and offset and can include either stepped or reverse-style lips. Custom Forged Wheels:
The automotive market has no shortage of amazing wheel companies but when it comes to the design and creation of something
unique and special, your options as a consumer dry up very quickly. AWC looked to solve that problem by reverse engineering
the wheel design and manufacturing process and in doing so has formed a global team of wheel designers, engineers,
manufacturers and refinishers. The end result is completely bespoke wheel design and manufacturing capabilities ranging from
15” to 22” in 2pc, 3pc and monoblock configurations. All of our wheels utilize premium grade forged 6061-T6 aluminum and all
undergo stringent FEA analysis during the design process to ensure structural strength and wheel longevity. Our process, build
standards and partners are all selected to meet or exceed TUV standards.
Inspired by the Campagnolo 40802, our "Campy Sport" makes reference to a number of the
design elements found on the original wheel, but redesigned as 3-pieces in order to account
for ultimate fitment and sizing choices.
Renders feature our vintage gold but virtually any finish colour is available
RS5
MONOBLOCK
Seat Features:
RECARO Podium M: with pads for medium build drivers
RECARO Podium L: with pads for larger build drivers
ABE and FIA homologation
Suitable for track and road
Carbon-fibre reinforced plastic (CFRP) seat shell
Removable seat pads for different comfort or driver styles
Sporty seat performance
Sleek racing seat look
Special lateral support
Specially formed shoulder support
Integrated headrest
Visible seat structures
Road use: with 3- or 4-point belt
FIA: with 4-, 5- or 6-point belt
Developed for the use of HANS systems
Lightest seat in the world
Net seat weight: only approx. 4.3 kg
RECARO Podium L: approx. 5.9 kg
RECARO Podium M: approx. 6.1 kg
Quality Sabelt ‘Serie Eco’ FIA-approved 3″
6-point harnesses, offering unbeatable
value for money. These are a critical
addition to any track or race car for safety
– pack includes two harnesses with clip-on
fittings and eyebolts. Long ‘Saloon’-type
shoulder straps to suit many models.
-3″ straps
-6 fixing points
-Rotary-type buckle
-FIA-approved (FIA8853/98)
-Available in black, red and blue
-Saloon-length shoulder straps
-Complete with clip-on fixings and eye-
bolts
Recaro Race Seat Sliders
2-Way Non Remote
Monotube construction
Various lengths available
Independent compression & rebound adjustment
from a single knob
14 clicks of compression adjustment
18 clicks of rebound adjustment
Linear & digressive piston options available
Various eyelet mounting configurations
Ride height adjustable
Coil over spring or shock only design
Wet strut configuration available
22mm shaft diameter for struts
16mm shaft diameter for shocks
Detailed Description