Documente Academic
Documente Profesional
Documente Cultură
Authors:
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
SUBJECT : DESIGN III / GENERAL
ARRANGEMENT & SAFETY PLAN
DOCUMENT NO : 01/D3-GFS/II/2018
DISCLAIMER
This design manual is a guidelines for educational purposes only. The authors
do not recommend this guidelines for industrial and commercial purposes. The
author is not liable in the event of any accident resulting from the use of this
manual for industrial and commercial applications.
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
Halaman ini sengaja dikosongkan
This page is intentionally left blank
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DAFTAR ISI
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
Halaman ini sengaja dikosongkan
This page is intentionally left blank
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 1 of 26
GUIDELINES Date: February 2018
1. PENDAHULUAN / OVERVIEW
Panduan ini bertujuan sebagai pedoman The guidelines is intended as a guide
mata kuliah Desain III (ME141326 for Design III ( ME141326) General
General Arrangement, Fire Control & Arrangement, Fire Control & Safety
Safety Plan (ME141603). Pedoman ini Plan (ME141603). It consists of 3
terdiri dari 3 bagian utama: main sections:
1. Prosedur 1. Procedures
2. Laporan 2. Reports
3. Standar dokumentasi 3. Standard of documentation
2. PROSEDUR / PROCEDURE
Prosedur dalam pengambilan mata The procedures for Design III (
kuliah Desain III (ME141326) General ME141326) General Arrangement,
Arrangement, Fire Control & Safety Plan Fire Control & Safety Plan, generally
secara garis besar dapat dilihat pada can be seen in Appendix B.
Lampiran B.
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 2 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 3 of 26
GUIDELINES Date: February 2018
3. LAPORAN / REPORT
Struktur laporan Design III / General The structure of Design III / General
Arrangement, Fire Control & Safety Plan Arrangement, Fire Control & Safety
terdiri dari 3 bagian utama, yaitu: Plan, consists of 3 main parts,
a. Filosofi Desain namely i.e.:
b. Rules & Guildelines yang a. Design Philosophy
digunakan b. Rules & Guidelines used in
c. Detail Perhitungan those chapter
d. Lampiran (Spect, Drawing, dll) c. Detail of Calculation
d. Attachment (Spect, Drawing,
etc)
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 4 of 26
GUIDELINES Date: February 2018
Simbol yang digunakan pada gambar The symbols used in the drawing
harus konsisten untuk semua must be consistent for all images. It
gambar. Disarankan untuk merefer is recommended to refer to certain
pada standar tertentu (JIS, DIN, ISO standards (JIS, DIN, ISO etc.)
dll.)
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 6 of 26
GUIDELINES Date: February 2018
e. Spasi e. Spacing
i. Spasi yang digunakan i. The spacing for report
untuk penulisan laporan writing is 1 (one) spacing.
adalah 1 (satu) spasi.
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 7 of 26
GUIDELINES Date: February 2018
LAMPIRAN A
APPENDIX A
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 8 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 9 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 10 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 12 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 13 of 26
GUIDELINES Date: February 2018
Contoh Format Cover (Batas Setiap Dokumen) / Template of Cover In each Document
For inside Chapter Report Cover
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 14 of 26
GUIDELINES Date: February 2018
Contoh Format Cover (Batas Setiap Dokumen) / Template of Cover In each Document
for Double Degree Program
Prepared by Approved by
Rev. Date Remark
Name of Student Name of Supervisor
(signature) (signature)
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 15 of 26
GUIDELINES Date: February 2018
II. OBJECTIVES
The things that we must understand about Ships Crew are:
1. Understand the Task of the crew in a ship.
2. Calculate the amount of crew based on the regulations according to
“Peraturan Pemerintah”.
III. REFERENCES
1. BKI Volume III for Machinery Installations 2016 Edition
2. Peraturan Pemerintah
3. MLC
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 16 of 26
GUIDELINES Date: February 2018
Doc. 01 - 42 XX YYZZ –
No. RP
NAME OF SYSTEM Rev.
BB
(14pt Franklin Gothic Book) No.
Page CC of DD
2. Boatswain SOLAS Rooms of Boatswain minimun
Rooms Chapter size =
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 17 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 18 of 26
GUIDELINES Date: February 2018
Supervisor :
Coordinator :
Supervisor :
Coordinator :
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 19 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 20 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 21 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 22 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 23 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 24 of 26
GUIDELINES Date: February 2018
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESIGN III
GENERAL ARRANGEMENT, Doc. No 01/ D3-GFS/II/2018
FIRE CONTROL & SAFETY PLAN
Rev. 00 Page 25 of 26
GUIDELINES Date: February 2018
LAMPIRAN C – Form D3
APPENDIX C – Design 3 Forms
Copyright: Dept. of Marine Engineering – ITS The guidelines for educational purposes only
DESAIN III : GENERAL ARRANGEMENT AND SAFETY
PLAN FORM 00
CHEATING FREE STATEMENT
Signed
( )
Nrp.
DEPARTMENT OF MARINE ENGINEERING – ITS
DESAIN III : GENERAL ARRANGEMENT & SAFETY
FORM 01
PLAN
DOCUMENT OF ASSIGNMENT
Semester : Odd / Even Year : Rev2 Feb. 2017
STUDENT DATA
Name of Student
Student’s Register No.
Name of Supervisor
Number of Attempt(s)
TASK DATA
General Arrangement Calculation and Drawing of General Arrangement according to Statutory and Class
Calculation and Drawing of Capacity Plan according to the operational design of the
Capacity Plan ships, and also compliance with the rules & guidelines of Class and Statutory
Calculation and Drawing of Safety & Fire Control Plan according to the operational
design of the ships, and also compliance with the rules & guidelines of Class and
Safety & Fire Control Plan Statutory
Reports Drawing Every chapter on Reports needs to be written in English
7 Calculation and location selection of the Frame spacing and double bottom height
Calculation and location selection for the Sterntube Bulkhead, Engine Room Until
8 Bulkhead, Cargo Space Bulkhead, and Collision Bulkhead week
Arrangement and Calculation ot the Rudder (Rudder Type & Power of Rudder
9 Machineries Needed) 5
10 Arrangement of the Decks
11 Calculation of the Crew Needs
SIGNED SIGNED
NOMOR ITEM CHECK
NO TARGET SUPERVISO COORDI
DOCUMENT / DRAWING DOCUMENT / DRAWING LIST
R NATOR
1 Doc. No. 01 - 42 13 101 005 - Estimation of the Ship Resistance & Engine Selection
RE
2 Doc. No. 02 – 42 13 101 005 - Calculation of Gross Tonnage, Amount of Crew, Fresh Week 4
GT Water, Fuel Oil and Lubricant
5 Doc. No. 05 – 42 13 101 005 - Calculation of Tank Capacity & Pay load
TC
3 Doc. No. 03 - 42 13 101 005 - Calculation of the Machinery of Anchor, Windlas,
AM Rudder, Loading-Unloading , Week 6
and Weight of the Construction and Machineries
4 Doc. No. 04 - 42 13 101 005 - Loading-Unloading System based on the Cargo and
CH Hatch Cover
6 Dwg. No. 01 – 4213 101 005 – Drawing of Side View, Frame Spacing and Bulkhead
GA Week 7
7 Dwg no. 01 – 42 13 101 005 – Drawing of Top View of the Deck, Double Bottom and
GA Tanks
PROGRESS I : (Until Tank Capacity Plan & Cargo Capacity Plan)
8 Doc. No. 06 - 42 13 101 005 - Crew Explanation
CF
9 Doc. No. 07 – 42 13 101 005 - Room Arrangement
RP
10 Doc. No. 08 – 42 13 101 005 - Navigation Equipments & Lights Arrangement
NA Week 12
11 Doc. No. 09 – 42 13 101 005 - Calculation of Chain Locker Volume & Mud Box
CV
12 Dwg no. 01 - 42 13 101 005 – General Arrangement Drawing
GA
PROGRESS II : Until General Arrangement
13 Doc. No.10-4213 101 005-FP Arrangement of the Fire Control Plan
14 Doc. No.11-42 13 101 005-SP Arrangement of the Safety Plan
Week 15
15 Dwg no. 02 - 42 13 101 005 – Colored Drawing of Fire Control Plan & Safety Plan (All
FSP Reports & Drawings)
PROGRESS III : Until Safety & Fire Plan
Final Evaluation (Week 16)
Semester Year
Name NRP
Supervisor NIP
Write your reason why you are late to apply for the DESIGN-III Course
Surabaya,
Student Advisor
( ) ( )
NRP. NIP.
Head of Undergraduate Department
( )
NIP.
DEPARTEMEN OF MARINE ENGINEERING – ITS
DESAIN III : GENERAL ARRANGEMENT & SAFETY
PLAN FORM 05
ASSISTANCE LOGBOOK
Semester : Odd / Even Year : Rev2 Jan. 2017
10
11
12
13
14
15
16
DESAINIII: RENCANA UMUM DAN SAFETY PLAN
(ME 141326) FORM 06
FORM ASSESTMENT
Rev 2 Feb-17
ASSESTMENT CRITERIA:
1. DOCUMENTS:
(1) Structures & Writing Format of the Report. (2) Completeness and depth of the
report content. (3) Conformity of report contents with drawings. (4) Compliance
with Rules / Regulations / Maker Recommendations
2. DRAWINGS :
(1) Tidiness. (2) Completeness and consistency of coding and symbols. (3)
Completeness of the design parameters. (4) Equipment and Instrument
completeness. (5) Compliance with reports and Rules & Regulation (6) Conformity
with image scale.
3. UNDERSTANDING:
(1) Describing a concept design. (2) Describe the contents of the report and design
drawings in detail (3) Connecting between the contents of the report with the
Drawings. (4) Ability of estimation based on engineering logic. (5) Attitude. (6)
Assistance
SCORE :