Documente Academic
Documente Profesional
Documente Cultură
(TENDER NO :- CCCC/ECRL/SC06/2019/___)
SECTION 6 : Construction of Deep Soil Mixing Piling Works from Chainage 322+080 to Chainage 325+110
1 PRELIMINARIES BQ 1 / 2
SECTION 6 : Construction of Deep Soil Mixing Piling Works from Chainage 322+080 to Chainage 325+110
PRELIMINARIES
A Allow for moving piling frame, plants, equipment and tools on and about site as
often as necessary for execution the Works under this section and all necessary
excavation that may entail for movement of piling frame, plant, equipment and
tools. any other necessary associates filling in and ramming including the
provision of hard standing and platform for the mounting piling frame, plant,
equipment and tools and piling at different shall be included .
The Main Contractor already have the insurance cover for the Works, etc CAR,
D WC AND TPL. if you feel necessary for your own extra Insurance cover .
F To submit and provide for all As Built Drawings, piling record, soil and cement
mixing drill depth signed records by the Project Employer.
--------------------------
H Mobilisation and Demobilisation of all piling equipment, the piling machine shall
minimun requirement of model capacity 280 and above, together with the number
of KD bar requirement at least 1.5 time of drilling pile length, the concrete casting
tremie pipe shall require at least 1.5 time of pile length and the Auger must fullfill
extra set. Allow for the cost of each piling equipment , machines (all including of
site management, plant and labour) necessary to complete the Works, properly as
per approved Construction Drawings, Specification and Bills of Quantities and
Contract Program. ( As a requirement provide sufficient Rigs to compliance with
Contract Program, all within this Subcontract value).
Item
J Allow for temporary Site Office and Off site Accommodation. Item
K The Main Contractor will provide the control point, you have engage PE to
establishment of all necessary bench marks for the setting out of the works
including the pile point & provision of site survey prior to commencement of any
permanent work. Item
L Provide all cost for incurred by complying with all safety, Health and Welfare
regulations appertaining to all workmen (including those employed by niminated
sub-contractors) employed on the site. the contractorshall provide and enfore all
safety measure as stipulated:-
1) Factories and Machinery regulation 1970
2) Occupational Safety and Health Act 1994
3) All other relevent safety at work legislations and regulations Item
M To privide the Performance Bond to the Main Contractor on thier Works Item
BF
BQ1 / 2
EAST COAST RAILWAY LINK PROJECT SECTION 6
(TENDER NO :- CCCC/ECRL/SC06/2019/___)
SECTION 6 : Construction of Deep Soil Mixing Piling Works from Chainage 322+080 to Chainage 325+110
CF
N Any other items deem necessary for Works not specified above
but required or implied from Contract Documentation, Drawings and
/or included in the Works Specifications and which are essential for the
proper execution Completion of this Section of the works. Item
BQ1 / 3
EAST COAST RAILWAY LINK PROJECT SECTION 6
(TENDER NO :- CCCC/ECRL/SC06/2019/___)
SECTION 6 : Construction of Deep Soil Mixing Piling Works from Chainage 322+080 to Chainage 325+110
The pay length for drilling of DSM pile shall be measured from
the proposed earthwork platform level to the toe of
irrespective depth
Trial Columns
C To provide machines, tool and labour to carry out 4
successive trial column test in the field at the proposed
treatment site according to the specification and drawing No. Unit Rate Rate Only
requirement.
BQ2 / 4
EAST COAST RAILWAY LINK PROJECT SECTION 6
(TENDER NO :- CCCC/ECRL/SC06/2019/___)
SECTION 6 : Construction of Deep Soil Mixing Piling Works from Chainage 322+080 to Chainage 325+110
BQ4 / 5
EAST COAST RAILWAY LINK PROJECT SECTION 6
(TENDER NO :- CCCC/ECRL/SC06/2019/___)
SECTION 6 : Construction of Deep Soil Mixing Piling Works from Chainage 322+080 to Chainage 325+110
A Compressor - Portable (including tools and hose) day Unit Rate Rate Only
Q Welding and cutting set - 375 amp day Unit Rate Rate Only
BQ4 / 6