Documente Academic
Documente Profesional
Documente Cultură
升级软件操作说明............................................................................................................................1
Software Update Operation Description
一、升级软件的安装................................................................................................................1
Software Update install
二、升级软件的操作................................................................................................................3
Software Update Operation
三、参数的读取和设置........................................................................................................... 7
Read and set parameters
四、用户界面设置..................................................................................................................12
User Interface
升级软件操作说明
Software Update Operation Description
一、升级软件的安装
2、桌面出现快捷图标,双击打开;
shortcut icon will be created on desktop, double-click to open
1
2
二、升级软件的操作
Software Update Operation
2、单 击 进行语言选择;
Click “ ”to choose Language.
4、单击 图标,进入升级菜单;
5
7、关闭升级软件,拔下 Micro USB 数据线后接通电子烟电源(装入电池),显示开机 logo
后开机,升级成功。
Turn off the software, unplug Micro USB and then turn on mod(Put the battery), Screen will
display “logo”. Next clicking fire button five times consecutively to keep normal work. It means
upgrade successfully.
说明:
Tips:
(1)升级过程中请勿关闭升级软件或断开 Micro USB 数据线。
During upgrading please don’t turn off software or disconnect Micro USB.
(2)如遇升级失败(比如显示异常或者无法开机等等)请按上述步骤再次升级即可。
If Upgrading is failure(Such as showed abnormal or mod won’t turn on ), Refer to the step
above again.
6
8、如遇升级文件过大时软件会报错,请更换升级文件。
If upgrade file is too large you will get an error message, Please change upgrade file.
三、参数的读取和设置
Read and set parameters
7
2、电子烟接通电源(装上电池),连续按五下吸烟键开机后,插入 Micro USB 数据线并与
计算相连接,connected 图标被点亮,连接成功;
Turn on the mod (Put the battery) and then press fire button five times consecutively to
enter standby screen; Insert Micro USB to connected to computer until“Connected” icon
brightened.
功率模式界面
9
温控模式界面
10
7、单击 Configs 可设置 LED 颜色/亮灯模式/循环模式/吸烟口数清零/界面选择/省电模式开
关,单击 Read Configs 读取电子烟当前设置,单击 Save Configs 保存当前设置。
Click the “Configs”to set the LED color/bright light mode/cycle mode/reset smoking
times/interface select/power-saving mode switch, Click “Read Configs” to read the current
settings and then click “Save Configs” to keep the setting parameters.
四、用户界面设置
1、单击图标 ,进入用户界面设置:
12