Documente Academic
Documente Profesional
Documente Cultură
Plunger
Low Pressure Chamber
Oil Passage
Check Ball
Plunger Spring
A132708E02
HINT:
At the removal of the hydraulic lash adjuster, the oil stored in the high-pressure chamber should be
drained and then refilled.
IMPORTANT SERVICE POINTS:
1. When hydraulic lash adjuster is removed and installed, or when parts associated to the lash adjuster
are replaced and/or disassembled, change the engine oil inside the hydraulic lash adjuster to clean
engine oil. When the hydraulic lash adjuster is replaced, add clean engine oil.
2. Keep the hydraulic lash adjuster free from dirt and foreign objects.
3. Only use clean engine oil when engine oil is charged.
4. Do not disassemble the hydraulic lash adjuster.
Part No. Information :
New Part No. New Part Name Qty
NA NA -
Production Effective :
VIN Production Date
NA NA
ENGINE
HYDRAULIC LASH ADJUSTER
INSPECTION
1. REPLACE ENGINE OIL
(a) Insert SST into the plunger of the hydraulic lash
adjuster and push down the check ball. Make sure
SST the needle of SST goes to the center of the plunger
and reaches the check ball.
SST 09276-75010
SST
Check Ball
A132709E02
A132710E01
A132711