Documente Academic
Documente Profesional
Documente Cultură
®
Water-cooled
direct injection
diesel engines.
TM
CONSTRUCTION
Cast iron crankcase for durability.
Large bearing surfaces for low bearing loads and long life.
ROTATION
Counter-clockwise, looking at the flywheel end.
COOLING
Belt-driven water circulation pump with thermostat.
Designed for operation in ambients up to 52°C (125°F).
LUBRICATION
Designed to run at high angles of inclination and includes
an oil strainer and full flow spin-on cartridge filter.
Lubricating oil pump is a gear-driven, positive displacement
design.
Oil service interval is 250 hours.
Engine Speed Continuous Power Intermittent Power Engine Speed Intermittent Power
r/min BS5514/ISO3046/DIN6271 r/min BS5514/ISO3046/DIN6271
B 624 24.6
C 926 36.5
D 260 10.2
E 540 21.3
F 400 15.7
Dimensions are for guidance only, and should not be
used for installation. The figures include radiator,
flywheel housing, starter motor and alternator.
®
This information is intended for the assistance of users and
is based upon results obtained from tests performed at the
place of manufacture. This company does not guarantee
that the same results will be obtained elsewhere under
different conditions and in certain applications. The
information in this brochure does not form a part of any TM
contract, guarantee or warranty. We have made efforts to Lister-Petter Limited, Dursley, Gloucestershire
ensure that the information is accurate, but reserve the right
© Copyright Lister-Petter Ltd.
to amend specifications and information without notice and
GL11 4HS England October 1996
without obligation or liability. Tel: +44 (0)1453 544141 Fax: +44 (0)1453 546732 027-08784 Issue 6