Documente Academic
Documente Profesional
Documente Cultură
I/O Interface
MEASUREMENTS Surveying the world, Mapping the future.
• 220 Channels 1 x Bluetooth(2402MHz to 2480MHz)
• High precision multiple correlator for GNSS pseudo range measurements 1 x standard USB2.0 port
• Unfiltered, unsmoothed pseudo range measurements data for low noise, 1 x TNC UHF connector
low multipath error, low time domain correlation and high dynamic 2 x RS232 serial port
V60
response 2 x DC power input (8-pin & 5-pin)
• Very low noise GNSS carrier phase measurements with <1 mm precision 1 x MicroSD card port
in a 1 Hz bandwidth
• Signal-to-Noise ratios reported in dB-Hz COMMUNICATION AND DATA STORAGE
3G Communication
Satellite Signals Tracked Simultaneously Fully integrated, fully sealed internal 3G, compatible with GPRS
GPS……………………………………………………… Simultaneous L1C/A, L2C, L2E, L5 Network RTK (via CORS) range 20-50km
GLONASS………… Simultaneous L1C/A, L1P, L2C/A (GLONASS M only), L2P
SBAS…… Simultaneous L1 C/A, L5 (EGNOS, WAAS, MSAS, GAGAN, QZSS)
Galileo1………………… Simultaneous L1 BOC, E5A, E5B, E5AltBOC(Optional) HI-TARGET Internal UHF Radio
BDS………………………………………………………………………………………………… B1, B2
Frequency ……………………………………450-470MHz with 116 channels
POSITIONING PERFORMANCE2 Transmitting power……………………………………………… 1~5W adjustable
Hot Start ………………………………………………………………………… Typically <10s Transmitting speed…………………………………………… 9.6Kbps, 19.2Kbps
Cold Start ……………………………………………………………………… Typically <15s Working range………………………………… 5km typical, 8~10km optimal
Power 6V to 28V DC external power input geometry, and atmospheric conditions. The specifications stated recommend the use of stable
Power consumption ≤3.5W mounts in an open sky view, EMI and multipath clean environment, optimal GNSS constellation
Automatic switching between internal power and external power configurations, along with the use of survey practices that are generally accepted for
performing the highest-order surveys for the applicable application including occupation times
Rechargeable, removable 7.4V, 5000mAh Lithium-ion battery in appropriate for baseline length. Baselines longer than 30 km require precise ephemeris and
internal battery compartment occupations up to 24 hours may be required to achieve the high precision static specification.
GPS only and depends on SBAS system performance. FAA WAAS accuracy specifications are
3
Static 13 - 15 hours
RTK rover (UHF/GPRS/3G) 10 - 12 hours Descriptions and Specifications are subject to change without notice
KEY FEATURES
Smart Operation OS: Android 6.0
Processer: 1.5GHz, 4 core
Ergonomically designed, lighter and easy Storage: RAM 2G, ROM 16GB (up to 32GB
● Visual LED screen and voice assistance guide your field Hardware extension Micro-SD)
to hold. Configuration Display: 3.7’’, 640 x 480, sunlight readable
operation quickly. Camera: 8MP, tag available
Sensors: G-sensor, E-compass, barometer,
light-field sensor, gyro
● Multi one-button operations. Auto base setup by one
button without controller. Cellular mode: Dual SIM card, dual stand-by
Cellular network: 4G TDD-LTE, FDD-LTE,
Industrial-grade protection that can withs- WCDMA, GPRS
tand tough environments. Communication Wi-Fi: IEEE 802.11b/g/n, 2.4GHz/5GHz
● Standard Rinex data and HI-TARGET raw data recorded Bluetooth: V2.0/4.0
USB: Type-C, supports OTG
at the same time. NFC
Powerful Battery
2019 2019