Documente Academic
Documente Profesional
Documente Cultură
Shutdown SIS
Previous Screen
SENR10630003
https://s1.remotelab.space:501/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.js… 1/4
3/8/2020 3412E Industrial Engine 4CR00001-UP(SEBP2510 - 68) - Systems & Components
NOTE: Repeat Steps 1 through 6 for the remainder of the rocker arm assemblies & push
rods.
NOTE: The following steps are for the installation of the rocker arm assemblies & push
rods.
7. Lubricate top pad of valve bridges (6) with clean engine oil.
https://s1.remotelab.space:501/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.js… 2/4
3/8/2020 3412E Industrial Engine 4CR00001-UP(SEBP2510 - 68) - Systems & Components
12. Install head bolt (1). Install bolt (2). Do not tighten bolt (2) at this time.
13. Tighten head bolt (1) to a torque of 270 ± 15 N·m (200 ± 11 lb ft). Tighten head bolt (1)
to a torque of 450 ± 15 N·m (330 ± 11 lb ft). Tighten head bolt (1) again to a torque of 450
± 15 N·m (330 ± 11 lb ft). Tighten bolt (2) to standard torque value.
NOTE: For more detailed information regarding the rocker arm assemblies and push rods,
see the topic "Valve Rocker Arms, Lifters & Bridges" in the Specifications Module.
End By:
1. Remove ring (1), washer (2) and arm assembly (3) from shaft (4).
https://s1.remotelab.space:501/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.js… 3/4
3/8/2020 3412E Industrial Engine 4CR00001-UP(SEBP2510 - 68) - Systems & Components
2. Remove ring (6), washer (7) and arm assembly (5) from shaft (4).
3. If necessary, remove two dowels (9) and shaft (4) from bracket assembly (8).
NOTE: The following steps are for the assembly of the rocker arm assemblies.
4. Install shaft (4) into bracket assembly (8). Install the two dowels if they were removed.
5. Lubricate shaft (4) with clean engine oil and install arm assemblies (3) and (5).
End By:
Copyright 1993 - 2020 Caterpillar Inc. Sun Mar 08 2020 07:55:05 GMT+0200 (Eastern
All Rights Reserved. European Standard Time)
Private Network For SIS Licensees.
https://s1.remotelab.space:501/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.js… 4/4