Documente Academic
Documente Profesional
Documente Cultură
extractor and
drain rack
When making the ceramic frit, the different components have to be melted at temperatures
above 1000 ºC, to proceed, afterwards, to their crystallization in water. The URBAR
vibrating conveyor is conceived to facilitate this process and furthermore to extract the
product.
The conveyor is equipped with two lateral pipes (for the water output and its subsequent
treatment in sedimentation basins), level adjusters and wheels to be conveyed. The tray
final part is free of water, and the negative inclination causes a first draining, before the frit
is put into big-bags.
The trough parts in contact with the product and the moving structure are made in AISI-304
stainless steel.
The extractors are driven by two URBAR unbalanced motors, with low maintenance, giving
the necessary reliability needed in a continuous job.
www.urbar.com
Ceramic frit extractor
and drain rack
After extracting the ceramic frit, and in order to improve the water draining, URBAR has
developed specific vibrating conveyors.
These machines have a 13º ascending inclination and are lined with alumina flagstones,
avoiding the frit contamination, otherwise caused because the abrasion and the high tray
inclination.
The conveyor is fed by the main extractor and its high inclination makes easier the water
evacuation through the incorporated back rack.
Usually, this machine feeds the packaging and weighing systems. The feeding is stopped,
every single time a container is filled up, allowing the main extractor to work continuously,
storing the frit in the back side, while the container is switched.
www.urbar.com
Ceramic frit extractor
and drain rack
Examples
2002.04
www.urbar.com