Documente Academic
Documente Profesional
Documente Cultură
MEASURING JOB
MANUAL
Loading or importing of CFIO data into CADCEUS.
1. Copy CFIO data into XQT folder.
C:\CADCEUS\XQT
2. GET F…
CLICK
Ex. HND-67751-X1YA300050-NG.cfio
FILE EXTENSION
NAME NAME
3. Create a GROUP for SEIHIN and for JIG parts to easily navigate or view
between SEIHIN and JIG parts.
* First find all the holes that are connected directly to the JIG
(holes with PIN or BOLTS)
* for circle:
1
1. CLICK the
drop down
menu
1 1
3 2
* After adding LINE and ARC on all the edges, center of the hole
needs to be determine.
ADDING POINT/DOT and CENTER LINE.
* For CIRCLE
1. CLICK
POINT
CLICK created.
the LINE.
* For OVAL SHAPE HOLE:
CENTER
CENTER of CIRCLE
2. CLICK
3. CLICK
* Record the numerical digits that will appear then proceed to the
next hole until everything was recorded.
* Next step is to project a section line to the SEIHIN data from the
MEASURE POINT of the JIG.
Measure Point
1. CLICK the drop
down menu
LINE CREATED
2. CLICK
Direction with
respect to Y-AXIS
Unbounded line
LINE CREATED
PROJECTING LINES
2. CLICK
4. SELECTION
TOOL
5. CLICK
6. CLICK then
select Z, then Then proceed to the next
confirm by MEASURE POINTS until
clicking mouse everything was projected.
button 2
CHECKSHEET
PART NUMBER
PART NAME