Documente Academic
Documente Profesional
Documente Cultură
Prepared by:
LOADINGS
1. DEAD LOAD
Concrete - 24 kN/cu.m
Structural Steel - 27 kN/cu.m
25 mm concrete topping - 0.60 kPa
Floor Finish - 0.50 kPa
Ceiling - 0.15 kPa
Utilities (Water, Electrical & Mechanical) - 0.24 kPa
150 mm CHB exterior wall - 2.40 kPa
100 mm CHB interior wall - 1.76 kPa
Gypsum board wall on metal frames - 0.38 kPa
2. DEAD LOAD
Commercial - 1.9 kPa
Stairways - 2.4 kPa
5. LOAD COMBINATIONS
D+L
1.4D
1.2D + 1.6L +0.5(Lr or R)
1.2D + 1.0W 0.5L(Lr or R)
1.2D + 1.0E + 0.5L
0.9D + 1.0E
OCCUPANCY CATEGORY
IV – Standard Occupancy Structure
STORY DRIFT LIMITATION
In accordance with the 208.6.5(for 5 storey) provision of NSCP PLEASE READ!!!
FOUNDATION
Soil bearing capacity of 144 kPa shall be used for gravity loading based on the provided
geotechnical report by ABC Geotek, Inc.
MATERIAL PROPERTIES
1. Concrete Compressive Strength in 28 days, fc' =27 Mpa
2. Structural Steel Yield Strength, fy = 248 Mpa
3. Reinforcing Bar Yield Strength: for 12mm dia. and below, fy = 275 Mpa
for above 12mm dia., fy = 414 Mpa