Documente Academic
Documente Profesional
Documente Cultură
Calle Los Talladores 176, Urb. Industrial El Artesano, Ate, Lima - Perú
Telf.: (+511) 436-8866 Fax: (+511) 436-8444 E-mail: ventas@higher-tech.com
CARACTERISTICAS DEL CARBURO DE CROMO
The Chromium
carbide surface of
SA 1750 CR consist
of a series of beads
(1” to 2” wide) with
numerous hairline
cracks. These
cracks are a natural
phenomenon
created during the
fusion Clad Process.
Crack are necessary
and desirable,
allowing the overlay
surface to be formed
into complex shapes
and to absorb
impacts that cause
others hard material
to facture.
Parameters effecting
wear ability of SA
1750 CR are very
complex. It can be
shown that hardness
alone is not always
the indicator of how
well a material will
withstand wear.
Calle Los Talladores 176, Urb. Industrial El Artesano, Ate, Lima - Perú
Telf.: (+511) 436-8866 Fax: (+511) 436-8444 E-mail: ventas@higher-tech.com
Calle Los Talladores 176, Urb. Industrial El Artesano, Ate, Lima - Perú
Telf.: (+511) 436-8866 Fax: (+511) 436-8444 E-mail: ventas@higher-tech.com
HOJA TECNICA DEL CARBURO DE CROMO
Calle Los Talladores 176, Urb. Industrial El Artesano, Ate, Lima - Perú
Telf.: (+511) 436-8866 Fax: (+511) 436-8444 E-mail: ventas@higher-tech.com
SA 1750CR STOCK PLATE
Sure alloy uses a mild steel substrate for all stock plate. This allows fusion clad plate to be
formed into complex shapes it unique ability to absorb impact. A variety of substrate can be on
special order. Also available are a variety of elements. Sure alloy engineers can help you
determine the best alloy combination for your application.
Weld rod and wire are available for field use. Installation gaps can be filled and high wear
areas can built up or repaired. A variety of alloy combinations are available to suit your needs.
Consult your Sure Alloy Steel representative for more information.
SA 1750CR APPLICATIONS
POWER: Fan blades, burner lines, chute and hopper liners, crusher parts, coal mill
components, bottom ash piping, air handling systems and conveyors.
STEEL: Bucket liners, grizzly bars, bell and bell seats, skip cars, chutes, hoppers,
pipes, pump housings, crusher parts, clinker chutes, pans, shaker screens.
CEMENT: Impact plates, pipes, pump housing, crusher parts, clinker chutes, shaker
screens.
PULP AND PAPER: Cyclone liners, bark chutes, screw conveyors, chutes and hoppers, fan
blades, transitions, flat back elbows.
MINING: Truck bed liners, bucket liners, chutes liners, crushers parts, decks, wear bars
and plates.
COAL PREP: Chutes, hoppers, crusher parts and liners, breaker bars, pipes, elbows, pump
housings.
Calle Los Talladores 176, Urb. Industrial El Artesano, Ate, Lima - Perú
Telf.: (+511) 436-8866 Fax: (+511) 436-8444 E-mail: ventas@higher-tech.com