Documente Academic
Documente Profesional
Documente Cultură
Now undertake the JSA and record in the table below. Use prompts on JSA Prompt Sheet and Hazard Checklist PA-HSEC-02-040-002-F03.
Part 3: Contingency Plans. Standard PPE,S : First aid kit must be present at the area and the Hse personnel is the first response in case of
emergency
Part 4: Review. After the job has been completed, JSA leader should note: any hazards, which were identified in the original JSA? Any practices
that need to be captured in the OMS? List action items, changes, and transfer any changes to the Change Management system.
File: 10.30
JSA No: JOB TITLE:
Step Describe Job Step Potential Hazards Hazard Controls
No (Copy from part 2 of form) (Use Hazard Checklist)
1 Mobilization of equipment Unauthorised equipment/tools brought out to Before mobilizing any equipment/tools make sure
site that the E &P Personnel got inspected the
equipment. Checklist are in equipment
Unskilled and uninducted personnel starting Ensure that all personnel prior to start the have
the job been inducted and oriented about the hazard in the
job site.
Open trench The use of leather gloves and proper lifting
techniques are required
Workers starting the job unfit to work All personnel not fit to work shall not be allowed
to work at the project site. Ensure excavation
certificate to BHP are in place
Hand Injury Ensure proper hauling of materials/get help if
required/Wear hand gloves. Ensure trolley are
secured with stable support
2 Welding of HVAC Pipes Exposure of workers to various hazard like Ensure workers are complying with the min. PPE
hand injury, dust, eye injury req. Safety shoes, helmet, safety glass, dust mask,
Ensure that double eye protection is required
.Ensure that the safety glass is weared under the
welding and grinding mask.
Heat Stress/Exhaustion Ensure potable water/sufficient shelter is available
each area where workers are doing the job. First
aid kit available at site.
Hand injury/skin burns Hand gloves and welding gloves should be worn
Eye injury Ensure workers are wearing both the eye goggles
& face shield/welding mask
Fire blanket must be at site during welding activity
Fire & explosion
Equipment Failure Ensure that equipment was check in daily basis and
checklist available at the equipment and tools and
colour coded
Ensure proper access and egress for all vehicles
JSA No: JOB TITLE:
Step Describe Job Step Potential Hazards Hazard Controls
No (Copy from part 2 of form) (Use Hazard Checklist)
Pinch point hazard Ensure that no grinders shall use with positive
lock. Ensure it was colour coded and inspected
prior to use
Back injury Ensure proper handling and positioning while
hauling a materials