Documente Academic
Documente Profesional
Documente Cultură
AIR DIFFUSION
& CASSETTE-GEKO
®
3
» HyCassette-Geko® with SWIRL® outlet
ENERGY EFFICIENCY
CHECK ENERGY CLASS ON
4
The motorized
SWIRL air outlet
an all-round success
Comprehensive concept,
maximum use
We optimize your total operating costs
continuously and sustainably: highly-
efficient fans are integrated in the unit
and precisely tailored to our ISYteq
control technology. Besides, our
reliable software enables individual
configuration and layout of
your system.
Air draught risk at 24.5 °C according to DIN EN ISO 7730 Air draught risk at 27 °C according to DIN EN ISO 7730
Zugluftrisiko Zugluftrisiko
Bei 24,5°C entsprechend ISO 7730 Bei 27°C entsprechend ISO 7730
0.1 m 0.1 m
0.1 m 0.1 m
ZR (%) ZR (%)
9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 7,5 7,6 7,7 7,8 7,9 8,0 8,1 8,2 8,3 8,4 8,5 8,6 8,7 8,8 8,9
ZR (%) 0 10 20 30 ZR (%) 0 10 20 30
Kategorie A B C Kategorie A B C
The simulated room air flow clearly shows for 308 m3/h according to DIN EN ISO 7730:
• smaller risk of air draft because of greater temperature homogeneity and lower air velocities
• Category A at 27 °C according to DIN EN ISO 7730 measured in the occupied zone of a sample office
• Category A and B at 24.5 °C according to DIN EN ISO 7730 measured in the occupied zone
5
First-class components
for a reliable system
PATENTED, EFFICIENT
AND INTELLIGENT
The swirled air stream, which can This energy-saving potential pays off not The control system ISYteq unites innovative
extend in all directions compared to the only in full-load operation but especially technology with simple operation. Every
conventional 4-way air outlet technology, in partial-load operation. The speed is current plant parameter and setting can be
guarantees an optimal feeling of comfort. then adapted by demand to the current easily displayed and adapted with the user
The flat air flow of the motordriven temperature requirements. GreenTech touch control panel or other smart devices.
SWIRL outlet thus supports the Coanda EC motors clearly run more efficiently The unit parameters can be adjusted to the
effect in cooling operation. In heating than asynchronous motors with the required functions, e.g. comfort control for
operation, it acts to counter the thermals same power. cassette units. These units provide additional
of the rising warm air thanks to the functions such as the Turbo or Swirl mode
steeper discharge angle. for rapid cooling of a room before use, or in
order to generate dynamic air movement.
6
Capacity overview HyCassette-Geko® with SWIRL® outlet
SWIRL® outlet
Cooling capacity Heating capacity Sound pressure Motor data EC
System CS* Speed V max. at 27°C/46 r.h. at 20°C PWW level motor
PCW 6/12°C 70/50°C ** 1 ~ 230 Volt
7
» Cassette Fan Coil Units
Cassette fan coil units are designed for the climate control of rooms.
They are installed above suspended ceilings as flush-mounted units.
The 3 models available – the Single, Double, and Big Single versions
– assure pleasant, comfortable room climate in summer and winter.
Installation in the open space between the suspended ceiling and the
floor slab above minimises space requirements and saves costs.
The 2-pipe systems feature 1 heat exchanger. Seasonable changeover from heating
to cooling, and vice-versa, is possible. The 4-pipe systems are quite impressive due
Comfortable to their 2 separate heat exchangers for heating and cooling operations. This means
that they allow spontaneous changer-over to the heating or cooling mode in any
climate-control zone, as required.
solution:
Very quiet 3-speed fans can additionally condition the air that is pulled in through
• Heating, cooling, ventilation, and primary air feed. Fully optimised heat exchangers are your guarantee for effective
filtering with only one unit and energy-saving medium temperatures. Minimum losses on the air path to the
• Fast reaching of the desired energy generators are the result. A regenerable G1 filter medium comes with the
temperature by a unit with series-production versions.
compact dimensions
• Energy savings by only slight In addition, 3-speed fans, optionally pre-installed valves, as well as 4-side, individu-
temperature differences ally adjustable air directional louvers ensure a pleasantly uniform distribution of the
between the heating and cooling conditioned air flow in the zones to be climate-controlled.
medium and the room
temperature
• Flexible temperature-regulation
with quiet operation
8
Harmony in engineering and design
Quality down to the very smallest detail
The quality standard of Cassette fan coil units is apparent in many technical
characteristics, all of which go to make up an overall perfectly harmonising
unified solution.
Thanks to its optimised engineering design, the heat exchanger assures ideal transfer of
cold and heat. The incoming air streams can be individually directed and are especially
gently distributed throughout the room.
A condensate pump and an air filter are part of the series-production versions. Condensate
that forms at the connections is captured by a collector on the side and passed on to the
main condensate pan. The designer enclosure is available upon request in special colours.
The extensive valve equipment provided allows flawless regulation of medium feed.
Two pre-punched openings for primary and supply air can even simultaneously provide
climate-control for a small adjacent room (although the extra room cannot be separately
temperature-controlled).
9
JUST THE RIGHT
VERSION
FOR ALL
REQUIREMENTS
10
For offices and sales rooms.
Fan coil units optimally provide feel-
good room climate. Very quiet, high-
capacity fans quickly bring the room
climate to the desired comfort zone.
11
SIMPLY INTELLIGENTLY
REGULATED
ISYTEQ CONTROLS
INNOVATIVE TECHNOLOGY
WITH INTUITIVE USER INTERFACE
The user can optimally match the Cassette Geko units to the required functions:
Comprehensive either by means of the control panel with a touchscreen, or by the USB socket and
an external notebook. The system acquires a wide range of measured values and
control possibilities: continuously monitors them, to assure safe and reliable operation.
• Control system for EC & AC fans
• Energy-optimized equipment Using the control panel with the new HMI touchdisplay, which resembles a modern
operation smartphone, enables the user to access the most important functions. The functio-
• Equipment ready to operate nal handling of the new control interface creates a completely new perspective for
and highly competent service the unit operation, events and settings. The user can select between 4 functional
• Plug-and-play functionality profiles. As a result, setpoint values and switching times can be very quickly and
• Modbus RTU and TCP/IP easily entered, and current actual values and messages can be simply visualized
always on board and read off.
• BACnet MSTP and TCP/IP
always on board ISYteq furthermore ensures energy-optimised operation of Cassette Geko fan coil
• On Board Webserver units. A coordinated switchover function, for example, prevents heating and cooling
(PC/Smartphone/Tablet control) circulation systems from working against each other. Hardware and software are
• Several digital and analogue developed entirely at FläktGroup. As a result of close collaboration in the company,
interface function for all our engineers can systematically adjust the control system to match every com-
customer requirements ponent – and in turn optimally exploit the possibilities of fan coil units. Service and
support also benefit from this arrangement, and can rapidly and competently react
whenever questions arise.
12
Controls panels ISYteq system controls
13
Systems and performance ratings Cassette-Geko®
Single
Air Flow Heating rating Cooling rating
Fan speeds 1 - 2 - 3 GCS
m3/h kW kW
Recirculated air with primary-air feed Type Performance rating min | max min | max min | max
Heating with pumped hot water U0W 0 1 2 250 | 850 2.9 | 9.2
Cooling with pumped cold water UW0 0 1 2 250 | 850 1.5 | 5.0
Double
Air Flow Heating rating Cooling rating
Fan speeds 1 - 2 - 3 GCD
m3/h kW kW
Recirculated air with primary-air feed Type Performance rating min | max min | max min | max
Heating with pumped hot water U0W 1 2 530 | 1.400 7.3 | 16.0
Cooling with pumped cold water UW0 1 2 530 | 1.400 4.0 | 8.8
Big Single
Air Flow Heating rating Cooling rating
Fan speeds 1 - 2 - 3 GCB
m3/h kW kW
Recirculated air with primary-air feed Type Performance rating min | max min | max min | max
Heating with pumped hot water U0W 1 620 | 1.200 8.6 | 14.6
Cooling with pumped cold water UW0 1 620 | 1.200 4.9 | 8.2
14
Noise Emission dB(A) Cassette-Geko®
Single
Performance rating
Fan speeds 1 - 2 - 3 GCS
0 1 2
Double
Performance rating
Fan speeds 1 - 2 - 3 GCD
1 2
Big Single
Performance rating
Fan speeds 1 - 2 - 3 GCB
1
15
Performance ratings Cassette-Geko®
Single
Performance rating
Fan speeds 1 - 2 - 3 GCS
0 1 2
Double
Performance rating
Fan speeds 1 - 2 - 3 GCD
1 2
16
Performance ratings Cassette-Geko®
Big Single
Performance rating
Fan speeds 1 - 2 - 3 GCB
1
Single GCS mm mm mm kg
Unit without design panel 298 575 575 23
Design panel 25 660 660 5
Double GCD
Unit without design panel 298 1175 575 45
Design panel 25 1260 660 9
Big Single GCB
Unit without design panel 322 822 822 36
Design panel 25 905 905 9
Accessories
Air-outlet side
Single – Double – Big Single
Spare filter set Filter class G1 (EN 779)
17
First Service
Always at your side
• Initial installation
• Maintenance and servicing
• Assembly services
• Spare parts
• Customer service
• Consulting
• Refurbishing
• Training
18
Economical from the beginning nicians are ready on-call in Germany alone for rapid deployment. All
services are designed for absolute safety and reliability. For example,
The technical developments of FläktGroup represent state-of-the-art an on-site function check is a part of our delivery service, conducted
swimming pool climate control. Our systems support diverse applica- by an experienced FläktGroup technician together with the installer.
tions that optimally conform to current criteria of cost effectiveness, This way we directly and personally pass on our functional know-how
safety and sustainability. Our products and services go far beyond pure built up over many years. In this context we should also mention the
technology. They are integrated into a comprehensive and in every training we offer in the technology of our climate control systems. Such
respect customised service package. This programme includes not training is a beneficial instrument for ensuring the lasting functionality
only conventional services such as spare part delivery, maintenance, and availability of the systems.
and repair. It unites the consulting and engineering of a technology
leader with customised after-sales service and rapid response times.
And this not only for installing new equipment. This service also A decision for quality
applies for upgrading and optimising old equipment and provides A high quality standard is the basis and principle for all our services.
you with perfect support in all project phases. The functionality of the All our service specialists are highly experienced and devote them-
system is secured over its entire service life. selves to their work with great diligence. Technically and personally
convincing: this is what you can expect from us.
19
PR-2015-0019-GB · R6-01-2019 © Copyright 2019 FläktGroup
WWW.FLAKTGROUP.COM HyCASSETTE- & CASSETTE-GEKO
FläktGroup is the European market leader for smart and energy efficient
Indoor Air and Critical Air solutions to support every application area.
We offer our customers innovative technologies, high quality and out-
standing performance supported by more than a century of accumulated
industry experience. The widest product range in the market, and strong
market presence in 65 countries worldwide, guarantee that we are
always by your side, ready to deliver Excellence in Solutions.