Documente Academic
Documente Profesional
Documente Cultură
SUPPRESSOR
VBR : 6.8 - 200 Volts
PPK : 1500 Watts DO-201
FEATURES :
* 1500W surge capability at 1ms 1.00 (25.4)
0.21 (5.33) MIN.
* Excellent clamping capability 0.19 (4.83)
* Low zener impedance
* Fast response time : typically less 0.375 (9.53)
then 1.0 ps from 0 volt to V BR(min.) 0.285 (7.24)
MAXIMUM RATINGS
Rating at 25 °C ambient temperature unless otherwise specified.
Note :
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1
(2) Mounted on Copper Lead area of 1.57 in2 (40mm2).
(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum.
Page 1 of 4 Rev. 02 : March 25, 2005
ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified
Note:
( 1 ) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent.
( 2 ) VF = 3.5 Vmax., IF = 100 Amps. ( 6.8 Volts thru 91 Volts )
VF = 5.0 Vmax., IF = 100 Amps. ( 100 Volts thru 200 Volts ) per 1/2 square or equivalent sine wave.
PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.
80 160
60 120
40 80
0 0
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
5.00 100
Pp,PEAK POWER (kW)
3.75
10
(WATTS)
2.50
1.0
1.25
Single Phase Half Wave
60 Hz Resistive or Inductive load 0.1
0.1µs 1.0µs 10µs 100µs 1.0ms 10ms
0
0 25 50 75 100 125 150 175 200 tp, PULSE WIDTH
TL, LEAD TEMPERATURE (°C)
Tr = 10µs TJ=25 °C
Pulse Width (tp) is defined
100 Peak Value as that point where the peak
IRMS current decays to 50%
of IRSM
10X1000 Waveform
as defined by R.E.A.
tp
0
0 1.0 2.0 3.0 4.0
T, TIME(ms)