Documente Academic
Documente Profesional
Documente Cultură
Upgrade package
3.Create a folder on C:\, name it and copy the 3-script file (XML form) and upgrade package to
that folder.
✓ NOTE: E1 Cable (TCU to 3G) is connected to TN C, thus you have to cross check on “site
basic script” to ensure there is TN C, if not edit to make it TN C
✓ Ensure that the upgrade package name is the same with the one on RBSSumary, if are not
the same, edit the package path on RBSSummary to that of Upgrage package.
4.On C:\, go to Cygwin → home →then create a folder and copy the remaining 2-Script file (MOS
form)
5.Set PC IP (Base band IP) and connect to baseband (LMT Port)
After download Complete then Intergrate and after that switch to Moshell.
8. OPEN MOSHEL
✓ lt all (refresh)
Connect Straight cable from Baseband (SYNC Port) to U9 DUG (GPS Port),then Login to this DUG and
proceed as follows .
✓ On SAU, DUG 900 EC Cable have to be connected on B1, DUG 1800 on A5 and DUG 7 7 on A6
and Login to each DUG to make these changes.
Remove all PDU (PDU 0,1,2), RUS 01(0,1,2), SAU from Not Present to Present.
External Alarm
Closing
Level 1
Alarm Slogan……………………..
https://169.254.2.2/ea.html