Documente Academic
Documente Profesional
Documente Cultură
Free Services
6 Free Services/18 months, whichever is earlier from the date of purchase of motorcycle &
scooter (subject to Free Service Coupon terms & conditions as mentioned in the Owner’s
Manual).
Free service entitles the customer to avail service as mentioned in the service coupon at free of
labour charges. Cost of oil and other materials for this service are chargeable.
Warranty
Warranty on Motorcycle is 5 years or 70,000 Kms. & Warranty on Scooter is 5 Years or 50,000
Kms. whichever is earlier from the date of purchase (subject to warranty terms & conditions
and limitations as mentioned in the Owner’s Manual).
------------------------------------------------------------------------------------------------------------------------------------------
TECHNICAL SPECIFICATION
Model :Karizma Self
I VEHICLE DATA
Model :KarizmaSelf
Type (Breif Description) : Motorcycle
Category of the Vehicle (as per AIS 053) L2
II ENGINE
Make & country of origin, if imported : Hero Motocorp Ltd. India
Model &identification :
Type : 4 Stroke , Air Cooled , Naturally Aspirated
Engine , OHC
Bore x Stroke, mm : f 65.50 x 66.2 mm
No.ofCylinders : One
Displacement : 223cc
Compression Ratio : 9.6 ± 0.2 :1
Maximum engine output kw @ rpm : 14.32KW ± 5% (19.2BHP)@ 7500 rpm
Maximum torque, Nm @ rpm : 19.35 Nm @ 6000 rpm
Air cleaner type : Viscous, Paper Pleated Type
III CLUTCH
Type : Multi plate wet type
IV GEAR BOX
Make &Model : Hero Motocorp Ltd., Karizma Carb Self Disc
Type : 5 Speed Constant Mesh
No.ofgears : Five
Gear ratio (overall) :
First : 2.769
Second : 1.722
Third : 1.263
Fourth : 1.000
Fifth : 0.815
Primary Reduction : 3.0909
Drive axle (Front/Rear/All) { Final Reduction } : 3.0769
Front axle ratio : N.A
Rear axle ratio : N.A
V STEERING
Type and brief description : Handle Bar Type
Steering wheel dia, mm : N.A
Ratio : N.A
VI FRAME
Long member size, mm : Diamond Type
Number of cross members : N.A
VII SUSPENSION
Type and brief description : FR: Telescopic Hydraulic
Shock Absorber
RR: Swing Arm with 5 Step Adjustable Hydraulic Shock
Absorber
Spring : N.A
Anti-roll bar : N.A
VIII SHOCK ABSORBER : As Mentioned Above
IX BRAKES
Service brakes (Brief description) :
ABS fitted (Yes/No) : No
Front (disc/drum) : Disc Brake - 276mm dia Disc-Non
Asbsetos type
Rear (disc/drum) : Internal expanding shoe type
(130mm)-Non Asbestos type
Total braking area : FR : 15.10 Cm 2 x 2
RR : 34.73 Cm 2 x 2
Parking brake : N.A
Secondary brake : N.A
XI ELECTRICAL SYSTEM
System voltage : 12 V
Battery rating, Ah : 6 Ah
Wiper motor : N.A
Wiping system (brief description) : N.A
XIV WEIGHTS
Maximum GVW, Kg (for rigid vehicle) : 284
Maximum GCW, Kg : N.A
(for articulated/combination vehicle) :
Maximum, FAX, Kg : 154
Maximum RAW, Kg : 224
Kerb weight with 90% fuel : 150
(with spare wheel, tools, etc) Kg :
Maximum Grade ability in 1st gear : 18 deg
XV SEATING
Seating capacity : 2
Sketch showing seating layout with dimensions : N.A
II ENGINE
Make & country of origin, if imported : Hero MotoCorp Ltd. India
Model &identification :
Type : 4 Stroke , Air Cooled
Engine ,OHC
Bore x Stroke, mm : 50.00 x 49.50
No.ofCylinders : One
Displacement : 97.2cc
Compression Ratio : 9.9 ± : 1
Maximum engine output kw @ rpm : 6.15 KW ± 0.25 (8.36Ps)@ 8000 RPM
Maximum torque, Nm @ rpm : 8.05 Nm @ 5000 RPM
Air cleaner type : Dry Paper Pleated Type
III CLUTCH
Type : Multi plate wet type
IV GEAR BOX
Make &Model :Hero MotoCorp Ltd., Splendour Pro Drum Self Cast
Type : Manual Type , Constant Mesh GB
No.ofgears : Four
Gear ratio (overall) :
First :3.182
Second :1.706
Third :1.238
Fourth :0.958
Fifth : N.A
Primary Reduction :3.722
Drive axle (Front/Rear/All) { Final Reduction } : 3.143
Front axle ratio : N.A
Rear axle ratio : N.A
V STEERING
Type and brief description : Handle Bar Type
Steering wheel dia, mm : N.A
Ratio : N.A
VI FRAME
Long member size, mm :Double cradle frame
Number of cross members : N.A
VII SUSPENSION
Type and brief description : FR: Telescopic Hydraulic ShockAbsorber
: RR: Swing Arm with adjustable Hydraulic ShockAbsorber
Spring :N.A
Anti-roll bar : N.A
XI ELECTRICAL SYSTEM
System voltage : 12 V
Battery rating, Ah :3 Ah (MF Battery)
Wiper motor : N.A
Wiping system (brief description) : N.A
XII FUEL TANK
Material :Metallic
Capacity :11 litres
XIII DIMENSIONS
Wheel base, mm : 1230 mm
Overall width, mm : 720 mm
Overall Length, mm : 2000 mm
Overall Height, mm : 1040 mm
Front track, mm : N.A
Rear track, mm : N.A
Minimum ground clearance, mm : 159
Cargo box dimensions : N.A
Load body platform area : N.A
XIV WEIGHTS
Maximum GVW, Kg (for rigid vehicle) : 242
Maximum GCW, Kg :N.A
(for articulated/combination vehicle) :
Maximum, FAX, Kg : 75
Maximum RAW, Kg : 190
Kerb weight with 90% fuel : 112 Kg
(with spare wheel, tools, etc) Kg :
Maximum Grade ability in 1st gear : 15 deg
XV SEATING
Seating capacity : 2
Sketch showing seating layout with dimensions :N.A
XVI FUEL CONSUMPTION DETAILS : 85 KMPL
Under standard test conditions & constant speed 40kmph @ 130 kg payload. The
actual test results may varydepending upon the riding condition and loading
condition.
XVII ANY OTHER DETAILS RELEVANT FOR THE MODEL :Trapeziodal Head Light with
Visor , Halogen Bulb Multi-reflector Tail light,Multi-reflector Winkers
-----------------------------------------------------------------------------
TECHNICAL SPECIFICATION
Model : Passion Pro Self Cast
I VEHICLE DATA
Model :Passion Pro Self Cast
Type (Breif Description) : Motorcycle
Category of the Vehicle (as per AIS 053) L 2
II ENGINE
Make & country of origin, if imported : Hero Motocorp Ltd. India
Model &identification :
Type : 4 Stroke , Air Cooled
Engine ,OHC
Bore x Stroke, mm : 50.00 x 49.50
No.ofCylinders : One
Displacement : 97.2cc
Compression Ratio : 9.9 ± : 1
Maximum engine output kw @ rpm : 6.15KW ± 0.25(8.36Ps) @ 8000 rpm
Maximum torque, Nm @ rpm : 8.05 N m @ 5000 rpm
Air cleaner type :Dry Paper Plated Type
III CLUTCH
Type : Multi plate wet type
IV GEAR BOX
Make &Model : Hero Motocorp ltd., Passion Pro Drum Self Cast
Type : Manual Type , Constant Mesh GB
No.ofgears : Four
Gear ratio (overall) :
First :3.182
Second :1.706
Third :1.238
Fourth :0.958
Fifth : N.A
Primary Reduction :3.722
Drive axle (Front/Rear/All) { Final Reduction } : 3.071
Front axle ratio : N.A
Rear axle ratio : N.A
V STEERING
Type and brief description : Handle Bar Type
Steering wheel dia, mm : N.A
Ratio : N.A
VI FRAME
Long member size, mm :Double cradle frame
Number of cross members : N.A
VII SUSPENSION
Type and brief description : FR: Telescopic Hydraulic Shock
Absorber
: RR: Telescopic / Swing Arm Hydraulic Shock
Absorber
Spring :N.A
Anti-roll bar : N.A
IV GEAR BOX
Make & Model: Hero Motocorp Ltd., Splendor iSmart Drum Self Cast
Type : 4-Speed Constant Mesh
No. of gears : Four
Gear ratio (overall) :
First : 3.181
Second : 1.706
Third : 1.238
Fourth : 0.958
Fifth : N.A
Primary Reduction : 3.722
Drive axle (Front/Rear/All) { Final Reduction } : 3.071
Front axle ratio : N.A
Rear axle ratio : N.A
V STEERING
Type and brief description : Handle Bar – Steering Stem Type
Steering wheel dia, mm : N.A
Ratio : N.A
VI FRAME
Long member size, mm : Tubular Double cradle frame
Number of cross members : N.A
VII SUSPENSION
Type and brief description : FR: Telescopic hydraulic Shock Absorber
: RR: Swing Arm with adjustable hydraulic Shock Absorber
Spring : N.A
Anti-roll bar : N.A
IX BRAKES
Service brakes (Brief description) :
ABS fitted (Yes/No) : No
Front (disc/drum) : Drum Brake - Internal expanding shoe type (130mm)
Rear (disc/drum) : Drum Brake - Internal expanding shoe type (110mm)
Total braking area : FR : 28.8 Cm2 x 2 ( DrumBrake )
RR : 24.8 Cm2 x 2
Parking brake : N.A
Secondary brake : N.A
XI ELECTRICAL SYSTEM
System voltage : 12 V
Battery rating, Ah : 3 Ah (MF Battery)
Wiper motor : N.A
Wiping system (brief description) : N.A
XIII DIMENSIONS
Wheel base, mm : 1235mm
Overall width, mm : 770mm
Overall Length, mm :1965 mm
Overall Height, mm : 1095 mm
Front track, mm : N.A
Rear track, mm : N.A
Minimum ground clearance, mm : 160 mm
Cargo box dimensions : N.A
Load body platform area : N.A
XIV WEIGHTS
Maximum GVW, Kg (for rigid vehicle) : 240Kg
Maximum GCW, Kg :N.A
(for articulated/combination vehicle) :
Maximum, FAX, Kg : 95
Maximum RAW, Kg : 203
Kerb weight with 90% fuel : 110 Kg
(with spare wheel, tools, etc) Kg :
Maximum Grade ability in 1st gear : 15 deg
XV SEATING
Seating capacity : 2
Sketch showing seating layout with dimensions :N.A
XVII ANY OTHER DETAILS RELEVANT FOR THE MODEL :Trapeziodal Head Light with
Visor , Halogen Bulb Multi-reflector Tail light, Multi-reflector Winkers.
-----------------------------------------------------------------------------
TECHNICAL SPECIFICATION
Model : Super Splendour
I VEHICLE DATA
Model : Super Splendor
Type (Breif Description) : Motorcycle
Category of the Vehicle (as per AIS 053) L2
II ENGINE
Make & country of origin, if imported : Hero Motocorp Ltd. India
Model &identification :
Type : 4 Stroke , Air Cooled , Naturally Aspirated
Engine , OHC
Bore x Stroke, mm : 52.4 x 57.8 mm
No.ofCylinders : One
Displacement : 124.7cc
Compression Ratio : 9.1± 0.2 :1
Maximum engine output kw @ rpm : 6.72 ± 5% KW @7000 ± 500 rpm
Maximum torque, Nm @ rpm : 10.35 N m @ 4000 rpm
Air cleaner type : Dry Paper Pleated Type
III CLUTCH
Type : Multi plate wet type
IV GEAR BOX
Make & Model: Hero Motocorp Ltd., Super Splendour Drum Self Cast
Type : Manual Type , Constant Mesh GB
No.ofgears : Four
Gear ratio (overall) :
First : 2.769
Second : 1.500
Third : 1.095
Fourth : 0.913
Fifth : N.A
Primary Reduction : 3.350
Drive axle (Front/Rear/All) { Final Reduction } : 3.000
Front axle ratio : N.A
Rear axle ratio : N.A
V STEERING
Type and brief description : Handle Bar Type
Steering wheel dia, mm : N.A
Ratio : N.A
VI FRAME
Long member size, mm : Double cradle frame
Number of cross members : N.A
VII SUSPENSION
Type and brief description : FR: Telescopic hydraulic shock Absorber
RR: Swing Arm with hydraulic Shock Absorber
Spring : N.A
Anti-roll bar : N.A
IX BRAKES
Service brakes (Brief description) :
ABS fitted (Yes/No) : No
Front (disc/drum) : Drum Brake - Internal expanding
shoe type (130mm)
Rear (disc/drum) : Drum Brake - Internal expanding shoe
type (130mm)
Total braking area : FR : 28.8 Cm 2 x 2 ( Drum
Brake )
RR : 28.8 Cm 2 x 2
Parking brake : N.A
Secondary brake : N.A
XIII DIMENSIONS
Wheel base, mm : 1265mm
Overall width, mm : 735mm
Overall Length, mm :1995 mm
Overall Height, mm : 1095 mm
Front track, mm : N.A
Rear track, mm : N.A
Minimum ground clearance, mm : 150
Cargo box dimensions : N.A
Load body platform area : N.A
XIV WEIGHTS
Maximum GVW, Kg (for rigid vehicle) : 251 Kg
Maximum GCW, Kg : N.A
(for articulated/combination vehicle) :
Maximum, FAX, Kg : 95
Maximum RAW, Kg : 203
Kerb weight with 90% fuel : 121 Kg
(with spare wheel, tools, etc) Kg :
Maximum Grade ability in 1st gear : 18 deg
XV SEATING
Seating capacity : 2
Sketch showing seating layout with dimensions :N.A
XVII ANY OTHER DETAILS RELEVANT FOR THE MODEL :Trapeziodal Head Light with
Visor , Halogen Bulb Multi-reflector Tail light,Multi-reflector Winkers.
---------------------------------------------------------------------------
TECHNICAL SPECIFICATION
Model : Glamour Self Drum Cast
I VEHICLE DATA
Model :Glamour Self Drum Brake
Type (Brief Description) : Motorcycle
Category of the Vehicle (as per AIS 053) L2
II ENGINE
Make & country of origin, if imported : Hero MotoCorp Ltd. India
Model &identification :
Type : 4 Stroke , Air Cooled ,
Engine , OHC
Bore x Stroke, mm : 52.4 x 57.8 mm
No.ofCylinders : One
Displacement : 124.7cc
Compression Ratio : 9.1± 0.2 :1
Maximum engine output kw @ rpm : 6.72 ± 5% KW @ 7000 ± 500 rpm
Maximum torque, Nm @ rpm : 10.35 N m @ 4000 rpm
Air cleaner type : Dry Paper Pleated Type
III CLUTCH
Type : Multi plate wet type
IV GEAR BOX
Make & Model: Hero MotoCorp Ltd., Glamour Drum Self Cast
Type : Manual Type , Constant Mesh GB
No.ofgears : Four
Gear ratio (overall) :
First : 2.769
Second : 1.500
Third : 1.095
Fourth : 0.913
Fifth : N.A
Primary Reduction : 3.350
Drive axle (Front/Rear/All) { Final Reduction } : 3.071
Front axle ratio : N.A
Rear axle ratio : N.A
V STEERING
Type and brief description : Handle Bar Type
Steering wheel dia, mm : N.A
Ratio : N.A
VI FRAME
Long member size, mm : Double cradle frame
Number of cross members : N.A
VII SUSPENSION
Type and brief description : FR: Telescopic hydraulic
shock Absorber
: RR: Swing Arm with hydraulic Shock Absorber
Spring : N.A
Anti-roll bar : N.A
IX BRAKES
Service brakes (Brief description) :
ABS fitted (Yes/No) : No
Front (disc/drum) : Drum Brake - Internal expanding
shoe type (130mm)
Rear (disc/drum) : Drum Brake - Internal expanding shoe
type (130mm)
Total braking area : FR : 28.8 Cm 2 x 2 ( Drum
Brake )
RR : 28.8 Cm 2 x 2
Parking brake : N.A
Secondary brake : N.A
XI ELECTRICAL SYSTEM
System voltage : 12 V
Battery rating, Ah : 3Ah (MF Battery)
Wiper motor : N.A
Wiping system (brief description) : N.A
XVII ANY OTHER DETAILS RELEVANT FOR THE MODEL :Trapeziodal Head Light with
Visor , Halogen Bulb Multi-reflector Tail light,Multi-reflector Winkers.
-----------------------------------------------------------------------------
TECHNICAL SPECIFICATION
Model : Achiever Disc
I VEHICLE DATA
Model :Achiever Disc
Type (Breif Description) : Motorcycle
Category of the Vehicle (as per AIS 053) : L 2
II ENGINE
Make & country of origin, if imported : Hero MotoCorp Ltd. India
Model &identification :
Type : 4 Stroke , Air Cooled ,
Engine ,OHC
Bore x Stroke, mm :57.30 x 57.80
No.ofCylinders : One
Displacement :149.1 cc
Compression Ratio :9.1 ± 0.2 :1
Maximum engine output kw @ rpm :10 KW ± 5 % @ 8000 ± 500 rpm
Maximum torque, Nm @ rpm :12.80 N-m @ 5000 rpm
Air cleaner type :Dry Paper Pleated Type
III CLUTCH
Type : Multi plate wet type
IV GEAR BOX
Make &Model :Hero MotoCorp Ltd., Achiever Disc Self
Type : Manual Type , 5 - Speed constant mesh
No.ofgears :Five
Gear ratio (overall) :
First :3.0769
Second :1.7895
Third :1.3043
Fourth :1.0909
Fifth : 0.9375
Primary Reduction :3.3500
Drive axle (Front/Rear/All) { Final Reduction } : 2.8000
Front axle ratio : N.A
Rear axle ratio : N.A
V STEERING
Type and brief description : Handle Bar Type
Steering wheel dia, mm : N.A
Ratio : N.A
VI FRAME
Long member size, mm : Diamond Type
Number of cross members : N.A
VII SUSPENSION
Type and brief description : FR: Telescopic Hydraulic Shock
Absorber
: RR: Swing Arm with Adjustable Hydraulic Shock
Absorber
Spring : N.A
Anti-roll bar : N.A
IX BRAKES
Service brakes (Brief description) :
ABS fitted (Yes/No) : No
Front (disc/drum) : Disc - Hydraulic Type (240mm)
Rear (disc/drum) :Drum - Mechanical Type ( Leading-Trailing )
type (130mm)
Total braking area : FR : 15.1 Cm 2 x 2
RR :28.8 Cm 2 x 2
Parking brake : N.A
Secondary brake : N.A
XI ELECTRICAL SYSTEM
System voltage : 12 V
Battery rating, Ah :7 Ah
Wiper motor : N.A
Wiping system (brief description) : N.A
XIII DIMENSIONS
Wheel base, mm :1290 mm
Overall width, mm :760mm
Overall Length, mm :2040mm
Overall Height, mm :1120mm
Front track, mm : N.A
Rear track, mm : N.A
Minimum ground clearance, mm : 160
Cargo box dimensions : N.A
Load body platform area : N.A
XIV WEIGHTS
Maximum GVW, Kg (for rigid vehicle) : 268
Maximum GCW, Kg :N.A
(for articulated/combination vehicle) :
Maximum, FAX, Kg : 86
Maximum RAW, Kg : 194
Kerb weight with 90% fuel : 138 Kg
(with spare wheel, tools, etc) Kg :
Maximum Grade ability in 1st gear : 18deg
XV SEATINGs
Seating capacity : 2
Sketch showing seating layout with dimensions :N.A
XVII ANY OTHER DETAILS RELEVANT FOR THE MODEL :Trapeziodal Head Light with
Visor , Halogen Bulb Multi-reflector Tail light,Multi-reflector Winkers.
-----------------------------------------------------------------------------------------------------------------------------------------
TECHNICAL SPECIFICATION
Model: Maestro
I VEHICLE DATA
Model : Maestro
Type (Brief Description) : Scooter
Category of the Vehicle (as per AIS 053) L 2
II ENGINE
Make & country of origin, if imported : Hero MotoCorp Ltd India
Model &identification :
Type : 4 Stroke , Air Cooled , Naturally Aspirated
Engine, OHC
Bore x Stroke, mm: 50.00 x 55.50 , mm
No. of Cylinders: One
Displacement: 109cc
Compression Ratio : 9.5 ± 0.2 : 1
Maximum engine output kw @ rpm: 6.0 KW ± 5% @ 7500 ± 500 RPM
Maximum torque, Nm @ rpm : 9.10 N-m @ 5500 rpm
Air cleaner type: Viscous , Paper Pleated Type
III CLUTCH
Type: Automatic Clutch
IV GEAR BOX
Make & Model: Hero MotoCorp Ltd, Maestro
Type: Variomatic Drive
No. of gears :
Gear ratio (overall) :2.5 – 0.85
First: N.A
Second: N.A
Third: N.A
Fourth: N.A
Fifth: N.A
Primary Reduction:
Drive axle (Front/Rear/All) {Final Reduction}:9.423
Front axle ratio: N.A
Rear axle ratio: N.A
V STEERING
Type and brief description: Handle Bar Type
Steering wheel dia, mm: N.A
Ratio: N.A
VI FRAME
Long member size, mm: High rigidity Under Bone Type
Number of cross members: N.A
VII SUSPENSION
Type and brief description: FR: Bottom Link
RR: Unit swing with spring loaded hydraulic damper
IX BRAKES
Service brakes (Brief description):
ABS fitted (Yes/No): No
Front (disc/drum): Disc Brake - expanding shoe type (130mm)
Rear (disc/drum): Internal expanding shoe type (130mm)
- Non Asbestos type
Total braking area: FR : 28.7 X 2 cm2
RR: 28.7 X 2 cm2
Parking brake: N.A
Secondary brake: N.A
XI ELECTRICAL SYSTEM
System voltage : 12 V
Battery rating, Ah : 3 Ah (MF Battery)
Wiper motor : N.A
Wiping system (brief description) : N.A
XIII DIMENSIONS
Wheel base, mm : 1240 mm
Overall width, mm : 710 mm
Overall Length, mm : 1780 mm
Overall Height, mm : 1165 mm
Front track, mm : N.A
Rear track, mm : N.A
Minimum ground clearance, mm : 155 mm
Cargo box dimensions : N.A
Load body platform area : N.A
XIV WEIGHTS
Maximum GVW, Kg (for rigid vehicle) : 240
Maximum GCW, Kg :N.A
(for articulated/combination vehicle) :
Maximum, FAX, Kg :115
Maximum RAW, Kg :195
Kerb weight with 90% fuel : 110
(with spare wheel, tools, etc) Kg :
Maximum Grade ability in 1st gear : 10 deg
XV SEATING
Seating capacity : 2
Sketch showing seating layout with dimensions :N.A
XVII ANY OTHER DETAILS RELEVANT FOR THE MODEL :Trapeziodal Head Light with
Visor , Halogen Bulb Multi-reflector Tail light combined with winker,Multi-
reflector fr Winkers.
-----------------------------------------------------------------------------------------------------------------------------------------------------