Documente Academic
Documente Profesional
Documente Cultură
Provide:
•10Base2 – Use thinnet cable segment length 185 m, and is used with
physical bus topology and logical bus topology.
•10Base5 – Thinnet wiring used with maximum segment length of 500 m, and
is used with bus topology bus topology physical and logical.
•10Base-T– Used cable UTP category 3, 5, 5e or 6 with a segment length of
100 meters and is used with topology star physical or extended and logical bus
topology.
•10Base-FL – Uses that operates at 850 nm multi-mode optical fiber cabling.
The maximum distance from a NIC to a hub is 2000 meters.
•100Base-TX – Used cable UTP category 5, 5e and 6 with a segment
length of 100 m, and is used with topology star physical or extended and
logical bus topology.
•100Base-FX – Using fiber optic multimode operates at 1300 nm segment
length wiring not specified maximum, depending on the use of a hub nox
class I or class II.
•1000Base-CX – Four drivers special-
purpose shielded cable assembly (IEEE
802.3z)
•ANSI/TIA/EIA-526, ANSI/TIA/EIA-526-7
and ANSI/TIA/EIA-526-14. They have a
standardized method of test fiber optic
cables.
Local codes always take precedence over state codes, which in turn
take precedence over national codes.