Documente Academic
Documente Profesional
Documente Cultură
REC15_AL / REC25_AL
Design
OSM15 and OSM25 provide switching and reclosing on bubble voids having the life expectancy of 30 years. This
power networks. OSMs utilize indoor switching modules multilayer patented insulation with the unrivalled dialectic
(ISM) contained within a sealed tank. ISM incorporates strength of 31 kV/mm withstands the lighting impulse
vacuum interrupters (VI) inside a polycarbonate housing. voltage as high as 150 kV, which is the highest in its class on
Each VI is embedded in a polymer bushing. This bushing also the market. The field-proven design is applicable for the use
encases current and voltage sensors to form single and in aggressive environment such as sand storms, salt fog,
completely solid insulation of each OSM pole. Voltage and steady downpour or snowfall and intense solar radiation. The
current are measured on all six bushings. The bushing tank is made of corrosion proof, powder coated aluminum
insulation is of a multilayer patented design. Polycarbonate and provides IP65 protection. This ensures maximum life
provides mechanical support and excellent dielectric and reliability with a fully insulated arrangement inside the
strength, while silicon rubber gives UV protection and an durable aluminum alloy housing. The ceramic breather is
extended creepage distance. Being of the same kind, located at the base of the tank to prevent a build-up of
polycarbonate and silicon rubber, when applied together, condensation. Voltage and current are measured on all six
create solid-state and jointless insulation without air- bushings.
Operation
The OSM mechanism is operated by three separate magnetic magnetic latching. Each magnetic actuator utilizes a single
actuators, one per pole. These magnetic actuators are coil which is used for both opening and reclosing operations
mechanically interlocked to guarantee correct a three phase and is the result of the “fourth generation” development of
operation. The device is latched into the closed position by magnetic actuators by Tavrida Electric.
Non-saturated
B-H curve
Iprim
Iprim~H
H
Current Transformer with Iron Core Rogowski Sensor (Air-Cored Current Transformer)
Legend:
High accuracy measurements Measurement error caused
Low accuracy measurements by the core saturation
• Wide dynamic range of measurement, giving current readings from milliamps to kA.
• Excellent linearity (Rogowski coils have no magnetic materials to saturate).
• No damage from large overloads & no danger from open circuited secondary windings.
• Non-intrusive current sensing drawing no power from the main circuit.
1. Provided on request.
2. Altitudes above 1000 m should be de-rated in accordance with IEC 62271-111
Recloser Control cubicle – RC
Introduction
Recloser control cubicles (RC) are microprocessor based controllers that provide advanced protection and automation,
instantaneous metering, data logging and RTU for remote control in one single package
5
1 6
7
8
9
10
2 11
3 12
4
The enclosure is made from lightweight powder-coated anodized aluminum and provides an IP65 degree of protection. The
control panel has a graphical LCD for clear event indication, comprising six-lines of 40-characters. Heavy duty battery for back-up
power supply and smart charger are designed to provide optimum charging and long life of the battery up to 10 years.
TEL-SCADA
such as DNP3 and IEC 60870-5-101/103/104. 4.0.2016.07.31
utilities:
Project completion
Payment
explanation agreement development Commissioning
Project start
Installation and
Offer Production and delivery commissioning
supervision
CAPEX Comparison
CAPEX
South America:
North America:
> 8 500 pcs.
> 1 200 pcs. >10 years ~30%
Australia: > 3 000 pcs. on the market of world market
South Africa: > 3 000 pcs.
North Africa: > 1 500 pcs.
Russian Federation: > 4 500 pcs.
Middle East:
European Union:
> 500 pcs.
> 5 000 pcs.
>40K
automatic
Other countries: > 10 000 pcs. circuit reclosers
in operation
Mexico Oman
Estonia Egypt
Russia China
Tavrida Electric worldwide
RUSSIA ESTONIA LITHUANIA
AS Tavrida Electric Export AS Tavrida Electric Export AS Tavrida Electric Export
3rd floor, 1A, Grizodubovoy str., 14, Visase str., 222 Ukmerges,
123007 Moscow Russia Tallinn 11415 Estonia Vilnius 07157 Lithuania
Tel./Fax: +7 (499) 530-22-05 Tel.: +372 606 47 57 Mobile: +370 614 49015
Fax: +372 606 47 59 Fax: +372 606 47 59
E-mail: export@tavrida.eu E-mail: export@tavrida.eu E-mail: rm@tavrida.eu
Web: www.tavrida.eu Web: www.tavrida.eu Web: www.tavrida.lt
rev. 1. 1.10.2016
This document is copyright and is intended for users and distributors of Tavrida Electric products. It contains information that is the intellectual property of Tavrida Electric
and this document, or any part thereof, should not be copied or reproduced in any form without the prior permission of Tavrida Electric
Tavrida Electric applies a policy of ongoing development and reserves the right to change products without notice. Tavrida Electric does not accept any responsibility for
loss or damage incurred as a result of acting or refraining from action based on information in this Catalogue.