Documente Academic
Documente Profesional
Documente Cultură
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B15F7; Certification ECU Vehicle Information Reading/Writing
Process Malfunction; 2014 2016 MY IS200T IS250 IS300 IS350 [04/2013 ]
DESCRIPTION
This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via
the audio and visual system vehicle customization screen.
HINT:
The certification ECU (smart key ECU assembly) controls the smart access system with pushbutton start (for
Entry Function) related items that are customizable via the multidisplay assembly screen.
CAN communication
system
Smart access system
Certification ECU Vehicle Certification ECU (smart key ECU
with pushbutton start
B15F7 Information Reading/Writing assembly) vehicle setting processing
(for Entry Function)
Process Malfunction error
Certification ECU (smart
key ECU assembly)
Radio receiver assembly
CAUTION / NOTICE / HINT
NOTICE:
Before replacing the certification ECU (smart key ECU assembly), refer to Registration.
Click here
After replacing the radio receiver assembly of vehicles subscribed to paytype satellite radio broadcasts, XM radio
ID registration is necessary (w/ SDARS System).
PROCEDURE
1. CHECK CAN COMMUNICATION SYSTEM
(a) Use the Techstream to check if the CAN communication system is functioning normally.
Click here
OK:
CAN DTCs are not output.
NG GO TO CAN COMMUNICATION SYSTEM
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 1/3
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B15F7; Certification ECU Vehicle Information Reading/Writing Process Malfunction; 2014 2016 MY IS…
OK
2. CHECK SMART ACCESS SYSTEM WITH PUSHBUTTON START (for Entry Function)
(a) Check if the smart access system with pushbutton start (for Entry Function) is malfunctioning.
Click here
HINT:
Customization may not be possible depending on the malfunction in the smart access system with pushbutton
start (for Entry Function).
OK:
No malfunctions are present in the smart access system with pushbutton start (for Entry Function).
GO TO SMART ACCESS SYSTEM WITH PUSHBUTTON
NG START (for Entry Function)
OK
3. CHECK CUSTOMIZE ITEMS
(a) Display the "Vehicle Customization" screen.
(b) Make a note of the customizable items for each certification ECU related system.
HINT:
The items shown as customizable via the audio and visual system vehicle customization screen can also be
changed using the Techstream. In the following step, the Techstream will be used.
(1) To matchup the items on the multidisplay assembly with the items on the Techstream, check the
customize parameters list for the smart access system with pushbutton start (for Entry Function)
related items that can be customized via the multidisplay assembly screen.
Click here
(c) Using the Techstream, confirm that it is possible to change the settings of the customize parameters
that are available for customization via the multidisplay assembly screen.
OK:
The items available for customization via the multidisplay assembly screen can be customized successfully using
the Techstream.
OK REPLACE RADIO RECEIVER ASSEMBLY
NG
REPLACE CERTIFICATION ECU (SMART KEY ECU
ASSEMBLY)
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 2/3
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B15F7; Certification ECU Vehicle Information Reading/Writing Process Malfunction; 2014 2016 MY IS…
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 3/3